Backnets B0BYNFDNC1 3 Way Thermostatic Shower Valve Installation Guide
- June 14, 2024
- Backnets
Table of Contents
Backnets B0BYNFDNC1 3 Way Thermostatic Shower Valve Installation Guide
ACCESSORIES & DIMENSIONS
Accessories list
Dimensional drawing(unit: mm)
INSTALLATION STEPS
**PRECAUTIONS FOR INSTALLATION
- Water pressure: 0.05MPa~0.5MPa
- Water supply line must be “hot water on the lefi, cold water on the right”
- Before installation, water must be released to flush the pipe sediment o prevent sediment blockage affecting normal use.
- Afire pipe connections are complete, a leak proof test must be conducted 10 check that all connections are properly installed.
-
Slot on the wall according to the size of the valve body. Recommended length is 240mm, width is 110mm and depth is 70-85mm. -
Drill 4 fixed holes in the wall according to the product size, Hammer the expanded screw in the 4 drilled holes, Position the valve body on the 4 screws, use a Philips screw driver to tighter the 4 self-tapping screws, fix the valve body on the wall. -
Connect all the pipes to check leakage, confirm| no leak occurs when turn on water.
-
Cover with decorative panels. -
Install the handwheel in the direction shown in the picture above and lock it with hexagon screws.
PRECAUTIONS FOR INSTALLATION -
Align the marks on the temperature valve stem.
-
Sleeve the plastic ring onto the valve stem with the “C” shape opening facing the right.
OPERATING INSTRUCTION
**
———————————————————————————
** Press the pointer to cross the temperature limit.
CLEANING ADVICE
-
Clean regularly to prevent water stains.
-
First spray the cleaner onto a soft cloth, and then gently wipe with the soft cloth.
-
After cleaning, the surface of the product must be rinsed with sufficient water to remove any remaining detergent.
-
Only use cleaners clearly marked for this product.
-
Do not use alkaline bleach containing hydrochloric acid, acetic acid and chlorine, which will cause surface damage.
-
Strictly abide by the amount of detergent and action time, never allow detergent action time greater than the specified value.
-
Abrasive cleaning tools and equipment are not allowed.
AFTER SERVICE SUPPORT
- Back nets support 5 years warranty. Free replacement of any parts. If you have any questions, please feel free to contact us.
- Email address: Backnets@126.com
Please do not hesitate to contact us with your questions, concerns and/or
problems0, we’re here to help.
Customer Support: Backnets@126.com ****
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>