BACKNETS Thermostatic Shower Faucet Set Instruction Manual

BACKNETS Thermostatic Shower Faucet Set

Please do not hesitate to contact us with your questions, concerns and/or problems, we’re here to help.
Email address: [email protected]

Thermostatic valve
Brass material, strong and durable Retro styling

DIAGRAM AND PARTS LIST

1. Shower arm
2. Gasket
3. Showerhead
4. Setscrew
5. Tapping screws
6. Valve Body
7. Panels
8. 3-function control handle
9. Flow control switch
10. Cold and hot water control switch (with constant temperature lock)
11. Flexible hose
12. Secure the screws
13. Tapping screws
14. Shower holder
15. Showerhead
16. Spacers
17. Body spray

RECOMMENDED TOOLS

INSTALLATION STEPS

PRECAUTIONS FOR INSTALLATION

• Water pressure: 0.0SMPa~0.SMPa
• The water supply line must be “hot water on the left, cold water on the right”
• Before installation, water must be released to flush the pipe sediment to prevent sediment blockage affecting normal use.
• After pipe connections are complete, a leakproof test must be conducted to check that all connections are properly installed.

1. Slot on the wall according to the size of the valve body. Recommended length is 240mm, width is 110mm and depth is 70-85mm.
2. Drill 4 fixed holes in the wall according to the product size, Hammer the expanded screw in the 4 drilled holes, Position the valve body on the 4 screws,use a phillips screwdriver to tighten the 4 self-tapping screws,fix the valve body on the wall.
3. Connect all the pipes to check leakage, and confirm no leak occurs when turning on the water.
4. Cover with decorative panels.
5. Install the handwheel in the direction shown in the picture above and lock it with hexagon screws.

PRECAUTIONS FOR INSTALLATION

1. Align the marks on the temperature valve stem.
2. Sleeve the plastic ring onto the valve stem with the “C” shape opening facing the right.

Install shower arm and overhead shower

1. Set the decorative cup on the shower arm.
2. Roll the teflon tape on the thread.
3. Tighten the shower arm clockwise on the water outlet hole of the shower arm. Then put the overhead shower on the shower arm.

Install shower seat

1. Roll the teflon tape on the thread of the shower seat.
2. Tighten the shower seat clockwise on the outlet hole of the outlet socket.
3. Connect the shower, tube, and shower seat, and finally insert the shower seat.

Install steps of Body Spray

Important notice

BACKNETS guarantees to the original consumer purchaser that you will receive free replacement due to defects in materials or workmanship during the warranty period;

1. For commercial purchasers, the warranty period is two(2)years for BACKNETS products from the date of purchase. For homeowner purchasers, five (5)years from the date of purchase;
2. This warranty is non -transferable.

This warranty does not cover BACKNETS products purchased from unauthorized sellers.

• Email address : [email protected]

Pipeline Schematic

Documents / Resources

| BACKNETS Thermostatic Shower Faucet Set [pdf] Instruction Manual
Thermostatic Shower Faucet Set, Shower Faucet Set, Faucet Set, Set
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>