JAIOT 5MP Wired PoE Camera with Metal Shell User Manual

JAIOT 5MP Wired PoE Camera with Metal Shell

PRODUCT INFORMATION

Before operating this unit, please read these instructions carefully, and save them for future use. This manual is only a guide for related products and may differ from the actual product, please refer to the actual product. Due to product version upgrades or other needs, this manual may be updated without further notice!

External power supply and camera hardware connection

• Connect the 12V 1A power supply with power interlace plug the network wire wait for about 2 minutes. machine start-up successful.

POE power wiring mode

The RJ45 interlace of the camera is connected to the POE port of the POE power supply with a network cable, and the LAN port of the POE power supply is connected to the router or switch with a network cable.

Camera connected to PC host settings

• IPCamSuite Preview:
  Install the searching tool of IPCamSuit. After the installation is complete, open the software to automatically search for the IP of the camera, double- click the IP of the device, and you can preview the image.

• EseeCloud client management software preview:
  Install EseeCloud software, click device management after installation, check the IP address of the camera, click Add, switch to the real-time preview interface, and double-click the IP of the camera in the device list to preview the image in real-time. (If you don’t add a camera, the live preview interface will not preview the image).
  Note : If there is no image display, please turn off the system firewall in the system control panel.

• Camera default IP : 192.168.1.88: username, admin; Password: None.

Camera connected to NVR
Right-click on the preview interface – select Video Management – click the drop-down box in the selection box on the right side of the video management, left-click the mouse twice,or click the [Add] button to add the IPC to the channel. After adding, you can preview the image in real time .. (If you don’t add a camera, the main interface will not preview the image).

You can download the EseeCloud APP on your Phone to remote control only if you have a JAIOT NVR device.

*You can get a JAIOT device on the JAIOT store.

Download Eseecloud APP
Users can search Eseecloud” on the APP store or Google Play or scan the QR code below to install the APP. Spend a few minutes to register an account.

Note : For the iOS system, it requires an iOS 11.0 version or above.For Android, Android 5.1 or above.

Connect the device

1. Log in to “Eseecloud APP and click’+” in the upper right corner of the page to enter the scanning interface;
2. If your camera is connected to the NVR, please scan the NVR ID OR code in the NVR “Network Settings’ interlace to add the NVR;

Warning
In case of fire or lightning, don’t put the product in a damp and rainy place, operate or maintain it according to the user manual. Be careful when you see attachments with a Dangerous Voltage which might cause serious electric accidents.

CAUTION RISK OF ELECTRIC SHOK DO NOT OPEN.

Warning
To reduce electric shock, and unprofessional people please don’t open the product’s front panel or rear panel.

Warning
In case of electric shock and fire, pis don’t use a power supply beyond the power list in the user manual.

Notice:

1. Ensure your equity, pls read the user manual carefully before you use the product
2. Pls contact professional people if you need to install and maintain the product
3. The input voltage of this model is DC 12V
4. Working Environment:temperature of -20°C-+60°C, relative humidity under 85%
5. Pis doesn’t exceed the user manual’s standard range of temperature, humidity, and voltage.

After-sales service

Attention

1. Product failure caused by the following conditions is not covered by the warranty:
   • Product failure due to accident, negligence, disaster, improper operation or mishandling;
   • Improper use of the environment or conditions, such as power failure, ambient temperature, lightning strikes, etc., resulting in product failure;
   • Products that have been repaired by a non-factory authorized maintenance unit;
   • Products sold for more than 12 months.
2. When the user finds that the product appears faulty, please contact the distributor or local service organization for technical service with the user registration card.
3. When the user has any objection to the technical service provided by the distributor, he can complain to the manufacturer’s customer support service center.
4. The warranty card must be valid after being stamped by the warranty unit.

Warranty service

Please fill in the warranty card details and return the warranty card to the manufacturer. The manufacturer will register and record the following benefits:

1. With this card, enjoy the free warranty and warranty period during the warranty period.
2. The user has a free replacement period of 7 days due to quality problems since the date of purchase, and the warranty period is 1 year.
3. Give priority to information about the new product information or preferential activities of the manufacturer.
4. Anyone who completes the registration has the opportunity to participate in training or other activities that are not regularly held.

Warranty card

If you have any requirements, please write here: distributor:

• Distribution unit: (Stamp)
• Tel:

Maintenance records

• Date
• Fault phenomenon
• Repair and serial number change

Note : If need to exchange, please record the original product number; The distributor will keep this warranty card.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>