pure P154502 Sieste Charge DAB+ FM Clock Radio User Guide

P154502 Sieste Batch
DAB+ FM Clock Radio
User Guide

Wireless charging

Place your Qi-enabled phone on the speaker grill

Depending on your phones design, the wireless charging area may not be centered and will require some positional adjustment when placed on the Siesta’s charging surface.

Overview

Rear panel connectors

adjust sleep timer
|

Basic options

Change time format

Set snooze time between 5 and 59 minutes

You can manually set the time on Siesta if you are in a poor reception area or if the time broadcast locally is unreliable.

Warranty information
Pure International Limited warrants to the end user that this product will be free from defects in materials and workmanship in the course of normal use for a period of two years from the date of purchase. This guarantee covers breakdowns due to manufacturing or design faults; it does not apply in cases such as accidental damage, however caused, wear and tear, negligence, adjustment, modification or repair not authorized by us. Please visit www.pure.com/register to register your product with us. Should you have a problem with your unit please contact your supplier or contact Pure Support at the address shown on the rear of this manual.

Quick setup

1. Position aerial (A) and connect power (B)
2. Push ( ) to switch on
3. Wait for Autotune to complete
   

display

1. Time
2. AM/PM indicator
3. Station name
4. Signal strength
5. Volume
6. DR: Digital radio
7. Alarms
8. ( ****) Kitchen timer
   ( ) Sleep timer

Approvals

CE marked. Hereby, Pure International Limited declares that the radio equipment type Siesta Charge is in compliance with Directive 2014/53/EU and RoHS Directive (2011/65/EU)The full text of the EU declaration of conformity is available at the following internet address: http://www.pure.com/about/red

radio

1. Press Source to select digital or FM radio
2. Change radio station
   Digital radio

Bluetooth

1. Press Source to select Bluetooth
2. On your Bluetooth device, switch Bluetooth on and connect to your Siesta

Presets

Store

Press and hold preset 1 or 2 for 2 seconds to store

Select preset 3+

Press and hold Select for 2 seconds to store

Select

Select preset number

Sleep timer

Alarm setup

1. Hold down alarm button 1/2/3 for 3 seconds
2. Press to scroll through and adjust options as shown below (steps AH)
3. Press to confirm settings and move to next step

Switching an alarm on or off

Press Alarm buttons to toggle alarms on or off

Snoozing a sounding alarm

Press Snooze button to snooze a sounding alarm

Canceling a sounding alarm

Press any back row button to cancel a sounding alarm.
Press Standby ( ****) to turn Siesta off

Settings menu

Auto tune

Specifications

• Radio Digital and FM radio
• Frequencies DAB/DAB+, FM radio 87.5-108 MHz
•  Bluetooth -Frequency range: 2402<2480 MHz -Maximum power: 0.15 dBm (EIRP)
• Power 100-240V AC to 5V (3A) DC external power adapter
• Input connectors 5V (3A) Jack/Barrel socket
• Output connectors USB-A (1A) socket for charging phone or tablet, 3.5mm headphone socket
• Software version v1.0
• Aerial Wire aerial attached

For safety information please refer to enclosed document 107SU

www.pure.com
support.pure.com
Pure International Limited
Concept House, Home Park Road
Kings Langley WD4 8UD
United Kingdom
Pure Europe GmbH
Möslbichl 78, 6250 Kundl, Austria
© Copyright 2018 by Pure International Limited. All rights reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>