FIAMMA 98655Z141 Awning Leg Polycarbonate Wall Brackets Instruction Manual
- June 14, 2024
- FIAMMA
Table of Contents
Installation instructions for brackets
ADAPTER
ADRIA CARAVAN
98655Z141 / 98655Z142
98655Z143 / 98655Z144
98655Z141 Awning Leg Polycarbonate Wall Brackets
FIAMMASTORE
Package contents
Installation instructions
Check that nothing has been damaged or deformed during transport.
In the event of doubts or questions concerning the installation, use or
limitations of the product, contact the dealer. Have the installation carried
out by qualifi ed personnel and in accordance with local regulations.
ATTENTION: INSTALLATION ON ADAPTER
Ensure that the adapter is mounted linearly and not present curves or
deformation due to the vehicle: in these cases, shim appropriately to ensure
the linearity of the bracket. The installation of the awning can occur only
when the adapter is perfectly aligned to the wall of the vehicle.
Attention Security.
Remove this label only after fixing the awning on the adapter.
Important: use of SIKA 252 (or Teroson MS 937) adhesive is essential for fi xing the bracket (brackets).
https://www.fiamma.it/image/data/download/preparation-and-sealing- instructions.pdf
Safety instructions
When using the awning please follow the instructions of the product.
ATTENTION Periodically check the brackets to make sure they are firmly
attached (especially after the first kilometers) make sure the bolts are not
loose and that holding brackets have not shifted.
Read the following instructions and warnings carefully; failure to observe
these installation and usage instructions as well as the laws for driving in
the relevant country may cause severe harm or damage for which the
manufacturer declines all responsibility.
In the event of an accident involving the vehicle and/or the product, ensure
that the product has not been damaged. In the event of damage, contact your
local retailer before moving the vehicle.
Fiamma declines every responsibility for any modifi cation of the product that
may cause damage and/or injury to things and people.
Before installation, ensure compatibility with the vehicle on which the
product must be installed.
Checking that the wall/roof/rear door is suffi ciently solid and suitable for
guaranteeing the resistance of the anchoring points is always mandatory. If
not, strength and compliance with the maximum load indicated in the
instructions are not guaranteed and it will be necessary to reinforce it these
points.
In the event of an accident involving the vehicle and/or the product, ensure
that the product has not been damaged. In the event of damage, contact your
local retailer before moving the vehicle.
Fiamma declines every responsibility for any modifi cation of the product that
may cause damage and/ or injury to things and people.
Warranty
Warranty Fiamma
In case of defects with regards to materials and manufacturing, the customer
is entitled to the warranty in accordance with local laws and regulations of
the country in which the product was purchased.
fiamma.com
Fiamma S.p.A. – Italy
Via San Rocco, 56
21010 Cardano al Campo (VA)
R0_IS_98691-094_revA
All rights reserved.
Fiamma S.p.A.
reserves the right to modify at any time, without notice, prices, materials,
specifi cations and models or to cease production of any model.