OPODEE HP1502R Portable Electric Space Heater User Guide
- June 14, 2024
- Opodee
Table of Contents
**OPODEE HP1502R Portable Electric Space Heater User Guide
**
Product Using Guiding
Power ON/OFF
Press to turn on/off
Child Lock Function
Long press for 3s to activate inactive the child lock function.
M : Mode / Heat Level Setting
Press to switch from High-Low-ECO-High
Oscillation
Press to start / end oscillation.
— /+ Temperature Adjustment
Press to adjust temperature from 61°F to 95°F (16°C – 35°C)
Auto OFF Timer
- Set Timer: Press repeatedly to cycle through 01 to 24 hour timer.
Note: Once set, the LED display will show the current temperature after flashing for 55 and the red icon *H” lights up
- Cancel Timer: Adjust the timer set to 00/Press twice when the LED displays the current room temperature.
Note: If the red icon “H” lights off, the timer setting is canceled successfully.
°F/°C Switchable
Long press the key on the remote for 2 to switch. you can also press and hold
simultaneously “+” and *-” on the LED display to convert °F/C.
Note: When the set temperature is reached, the heater will stop working When the room temperature is lower than the set one, the heater will start working again
EASY TO INSTALL
Step 1. Keep two base halves in a crossed position, then insert pegs on
one half onto the slots on the other half. Press down on edges to click two
base halves together. (Fig.1)
Step 2. Fit the base onto the bottom of the space heater by aligning the
arrows on the underside. (Fig.2)
Step 3. Rotate the base counterclockwise to lock in place. (Fig.3)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>