miuedo Smart Deadbolt User Manual
- June 14, 2024
- Miuedo
Table of Contents
User Manual
for Smart Deadbolt
Smart Deadbolt
Thank you for your purchase. Please read this user manual before operating
your smart lock, and keep it for further reference.
Powered by Miuedo Smart Lock
PREFACE
Please read this munual before installation.
Any question, please contact our customer service.
How Can i Get Tech Support?
E-mail: Miuedo@outlook.com
INSTALLATION VIDEO ON YOUTUBE OR AMAZON
How to install and program the smart lock?
https://www.youtube.com/channel/UCKkR3Kkwsxoz8jXHO4q9Up3g
https://www.amazon.com/vdp/022642b154a34fa08cf4de32932b657d
https://www.youtube.com/channel/UCkR3Kkwsxoz8jXHO4q9Up3g/videos
Warm Notice
- If the lock cannot be added, press the reset button and enter the neciovation password: ” 000√”
- There are some differences between the left-side and right-side door.
Check your door orientation and set the appropriate orientation on TTLock APP after installation.
Product Design
- Fingerprint Reader
- Touch Keyboard
- Cylinder Cover
- Metal Keyhole
- USB Port
- Battery Cover
- Thumb Turn Piece
- Button for Locking&Unlocking
- Security Switch
- Rear PC Board
- Reset Button
- Wire Connector
Installation
Step 1 Adjustable deadbolt length
If backset of door measures 2 3/4″ (70mm), adjust latch by rotating face as shown.
Installing the deadbolt, “up” is upward
Step 2 Installing the front panel
Keep the pin of the cylinder vertical and insert the keypad into the latch.
Step 3 Installing the mounting plate
Keep the pin of the cylinder vertical and insert the keypad into the latch.
Step 4 Conect to the IC wire
Connect the IC wire to insde back panel and make it fully inserted
Step 5 Install inside back panel
screw inside back panel to mounting plate ( Demonstration of the right door )
Step 6 Install 4pcs AA batteries, screw back the battery cover
Remark: After installation completed, please check if the keypad light on by
touching the keypad, if not, please check the connection of the IC wire or
change new batteries.
Step 7 Set openning direction on TTLock APP
Setting → Door openning direction → choose “Open to right” or “Open to left”
→OK
Notice: Anti-Lock FUNCTION & Motor Recovery
Notice: when anti-lock is ON, only manager can unlock the door by TTLOCK APP, any other passcode or fingerprint can not unlock the door and recieve “security lock’s on”.
- Button for lock and unlock Notice: The motor will have an automatic recovery time, if you repeatedly press the button, please wait 3s for the motor to recover.
- Thumb Turn Piece-manual lock & unlock
Notice: Auto lock and manual lock
Auto lock: set on the TTLock APP, and customize time
Manual lock: click the “v” on the keypad for 2-3 seconds, it will manual lock.
SMART INSTRUCTION
Pairing Lock to Phone App
-
Download the App “TTLock”
Android Mobile Phone–Search “TTLock” from Google Play.
Apple Mobile Phone–please search “TTLock” from App Store.|
---|---
https://www.pgyer.com/Ptdq| https://itunes.apple.com/WebObjects/MZStore.woa/wa/viewSoftware?id=1033046018 -
Register and Login the Account
-
Match the Lock to the Application
When matching, follow the prompt steps of the program, you need to touth the screen after installing the lock and installing the battery, match the blue icon lock , and set the name for the lock.
Note: If the smart lock is in a non-addable state, take off the back lock and press the reset button and enter the neciovational password: “000√”, then add lock again(need to be powered)
-
Right Door/Left Door
Check your door, and choose the direction of the door, Open to right/Open to left.
TTLOCK App Operating
-
Account Information Change
When logging in “TTLock” App, you need set up an account contain account password.
Each account can be added with multiple smart device locks for management.
Once the smart lock is added, it will become the admin account for the lock.
-
Lock/Unlock
Press for unlock, long press for lock.It requires your smart phone and Bluetooth lock to be within a certain range.
Note: If you want remote control,you need to connect to the Gateway. -
Send ekey
You can add another account on the app.
This way your family can also control the Bluetooth lock via the app.
Support authorized users to Limit time, Permanent, One-time, Recurring control smart lock.
-
Generate Passcode
Generate or customize the pass-code of the Bluetooth lock. Generate or customize permanent, one-time, time-limited, recurring passcode. Note: Generate the passcode to clear the passcode that Bluetooth lock stored by “Erase”. Once used, in addition to the admin passcode, other passcode will be cleared.
-
ekeys
Manage the authorized accounts in Send eKeys.
Admin can clear eKey, reset eKey, send eKey etc. -
Passcodes
It records all passwords stored by the Bluetooth lock you had set. In addition, it can also reset, generate, upload passwords. -
IC Cards
You can match two types of IC card: Permanent or Timed. Place the card against the card reader sensor on the smart Lock(keypad panel). -
Fingerprints
You will be required to Place and Remove your finger to the sensor several times please follow the prompts. -
Records
It records the time and manner of the smart lock when someone opening or closing. Manage your Bluetooth lock safely and efficiently. -
Settings
It have the function about the Bluetooth lock function setting, lock information setting, remote unlocking, auto-off time, lock sound, time proofread, record reading, etc.
You can find the information about the lock such as battery power, admin passcode.
Note: The admin passcode will notbe cleared when erase passcode.If you forget to lock your door often, you could to set“ Auto Lock”.
Set the time for automatic locking in your needs, so you don’t have to worry about security accidents due to being unlock.
- Remote Control
Remote control support needs an extra additional Wi-Fi Gateway. Match the gateway, smart phone, app then the smart lock can support remote control lock.
MATCH the Wi-Fi GATEWAY to the APPLICATION
Remote Control and Alexa would support after matching the Wi-Fi Gateway.
Click the button in the upper left corner of the page and enter relevant
information as prompted to add a gateway to your account.
Note: When the smart phone app matches the smart lock or the gateway, it
is necessary to enable Bluetooth and Wi-Fi. It can be successfully matched
when your smart phone is close to the lock and the Gateway.
MATCH the TTLOCK APP to the ALEXA APP
After setting up to the gateway, authorize the TTLock app in the Alexa app and
log in to the TTLock account to enable remote unlock and voice remote unlock.
Select “Skill & Games, input “TTLock” in the search bar, click “ENABLE TO
USE”. And input TTLock account and password to finish the authorization.
Note: If shows “Invalid Account and Password”, please add “+1” at front
of the account.
Press locks option,choose the lock you paired. Click the icon in the upper right corner and slide the icon button of “unlock by app” and “unlock by vocie”.
MATCH the SMART WATCH to the SMART LOCK
Apple watch
Android watch
Support Smart Watch (Apple watch or Android watch) lock/unlock.
It is supported that smart watch match to smart phone.
If the watch is connected to the phone, but it cannot search the “TTLock” App.
Try to log in to the home page at your phone app, to refresh, and then check
in the watch.
If all settings are normal but can’t lock/unlock.
Opening the “TTLock” App in your phone to check if the key is in a normal
state.
Note: All the operations, your watch and mobile phone require a certain
range, the mobile phone network and Bluetooth need to remain in a normal
state.
Warranty
You will be 100% satisfied. We provide a refund 60 days after purchase and 90 days to replace the product regardless of the issue. E-mail us with your order information to learn more. Powered by Miuedo Smart Home
Installation video
https://www.youtube.com/channel/UCkR3Kkwsxoz8jXHO4q9Up3g/videos
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>