THRUSTMASTER PS5 Racing Clamp User Manual

: June 14, 2024
: THRUSTMASTER

Table of Contents

THRUSTMASTER PS5 Racing Clamp
Product Information
Product Usage Instructions
TECHNICAL FEATURES
WARNINGS
- INSTALLING THE RACING WHEEL ON ITS BASE
ADJUSTING THE PEDALS’ HEIGHT AND SPACING
ATTACHING THE RACING WHEEL
MAPPING FOR PC
- MODE BUTTON AND INDICATOR LIGHT (6)
FAQ
CONSUMER WARRANTY INFORMATION
FCC
TECHNICAL SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

THRUSTMASTER PS5 Racing Clamp

THRUSTMASTER-PS5-Racing-Clamp-PRODUCT

Product Information

Technical Features

T300 RS base
PS wheel
2 sequential paddle shifters (Up & Down)
Directional buttons
Built-in USB sliding switch for PS5TM consoles, PS4TM consoles, and PC
MODE button + red/orange/green indicator light
SHARE/OPTIONS buttons on PS4TM consoles and CREATE/OPTIONS on PS5TM consoles
PS button
Large threaded hole (for attachment system and fastening screw)
Attachment system
Metal fastening screw

Important Notes regarding the USB Sliding Switch (5)

In order to function on a PS5TM console or PS4TM console, the USB sliding switch (5) on the racing wheel’s base must always be in the PS5TM-PS4TM position before connecting the racing wheel’s USB cable to the console.
In order to function on a PS3TM console, the USB sliding switch (5) on the racing wheel’s base must always be in the PC position before connecting the racing wheel’s USB cable to the console.
In order to function on a PC, the USB sliding switch (5) on the racing wheel’s base must always be in the PC position before connecting the racing wheel’s USB cable to the PC.

Additional Features

Thrustmaster Quick Release
L3/R3 buttons
Power supply connector (type A or B, varies from one country to another)
Racing wheel USB cable and connector
Shifter (gearbox) connector (sold separately)
Pedal set connector

Power Supply Options

Your racing wheel’s power supply varies according to the country where you purchased your device. The power supply can be:

Internal, with a power supply unit located directly inside the racing wheel’s base, with a type A connector.
Internal, with a power supply unit located directly inside the racing wheel’s base, with a type A connector.
External, with an external power supply unit, with a type B connector.

IMPORTANT: If you do not know which voltage is supplied in the area in which you are using your racing wheel, please ask your local electricity supplier.

Product Usage Instructions

Plugging the Racing Wheel into an Electrical Outlet

Please read the following instructions before proceeding:

Internal Power Supply (Type A Connector):

If your racing wheel has an internal power supply unit with a type A connector and is compatible with 220-240 V electrical power, connect the provided 220-240 V power supply cable to the racing wheel’s base.
Never connect the 220-240 V cable to a 100-130 V electrical outlet or a power adapter.

Internal Power Supply (Type A Connector):

If your racing wheel has an internal power supply unit with a type A connector and is compatible with 100-125 V electrical power, connect the provided 100-125 V power supply cable to the racing wheel’s base.
Never connect the 100-125 V cable to a 220-240 V electrical outlet or a power adapter.

External Power Supply (Type B Connector):

If your racing wheel has an external power supply unit with a type B connector, connect the provided power supply cable to the racing wheel’s base.
This type of power supply is compatible with all electrical voltages, from 110-240 V.

FAQ

Q: Can I use the T300 RS racing wheel with games without connecting it to the Internet?

A : Yes, you can use the T300 RS racing wheel with games without connecting it to the Internet. However, to ensure that the racing wheel functions correctly with games, it is recommended to install the games’ automatic updates when your console is connected to the Internet.

Q: Can I use the T300 RS racing wheel on different consoles and PCs?

A : Yes, the T300 RS racing wheel is compatible with PS5TM consoles, PS4TM consoles, PS3TM consoles, and PC. However, please ensure that the USB sliding switch on the racing wheel’s base is set to the appropriate position for the console or PC you are using.

Q: Can I open up the racing wheel for repairs?

A: No, please do not open up the racing wheel as there are no user-serviceable parts inside. Any repairs must be carried out by the manufacturer, its authorized representative, or a qualified technician.

Q: Can I use attachment systems/accessories not specified by the manufacturer?

A : No, it is recommended to only use attachment systems/accessories specified by the manufacturer to ensure proper compatibility and functionality.

Q: What should I do if the racing wheel is operating abnormally?

A : If the racing wheel is operating abnormally, such as emitting abnormal sounds, heat, or odors, please stop using it and contact the manufacturer, its authorized representative, or a qualified technician for assistance.

WARNING:

To ensure that your T300 RS racing wheel functions correctly with games, you may be required to install the games’ automatic updates (available when your console is connected to the Internet).

TECHNICAL FEATURES

T300 RS base
PS wheel
2 sequential paddle shifters (Up & Down)
Directional buttons
Built-in USB sliding switch for PS5™ consoles, PS4™ consoles and PC
MODE button + red/orange/green indicator light
SHARE/OPTIONS buttons on PS4™ consoles and CREATE/OPTIONS on PS5™ consoles
PS button
Large threaded hole (for attachment system and fastening screw)
Attachment system
Metal fastening screw
- Important notes regarding the USB sliding switch (5):
- In order to function on a PS5™ console or PS4™ console, the USB sliding switch (5) on the racing wheel’s base must always be in the PS5™-PS4™ position before connecting the racing wheel’s USB cable to the console.
- In order to function on a PS3™ console, the USB sliding switch (5) on the racing wheel’s base must always be in the PC position before connecting the racing wheel’s USB cable to the console.
- In order to function on a PC, the USB sliding switch (5) on the racing wheel’s base must always be in the PC position before connecting the racing wheel’s USB cable to the PC.
Thrustmaster Quick Release
L3/R3 buttons
Power supply connector (type A or B) (varies from one country to another)
Racing wheel USB cable and connector
Shifter (gearbox) connector (sold separately)
Pedal set connector

PLUGGING THE RACING WHEEL INTO AN ELECTRICAL OUTLET: PLEASE READ BEFORE PROCEEDING!
Your racing wheel’s power supply varies according to the country where you purchased your device.

The power supply can be:

WARNINGS

Before using this product, please read this manual carefully and save it for later reference.

Warning – Electrical shock

Keep the product in a dry location and do not expose it to dust or sunlight.
Do not twist or pull on the connectors and cables.
Do not spill any liquid on the product or its connectors.
Do not short-circuit the product.
Never dismantle the product; do not throw it onto a fire and do not expose it to high temperatures.
Do not use a power supply cable other than the one provided with your racing wheel.
Do not use the power supply cable if the cable or its connectors are damaged, split, or broken.
Make sure that the power supply cable is properly plugged into an electrical outlet, and properly connected to the connector at the rear of the racing wheel’s base.
Do not open up the racing wheel: there are no user-serviceable parts inside. Any repairs must be carried out by the manufacturer, its authorized representative, or a qualified technician.
Only use attachment systems/accessories specified by the manufacturer.
If the racing wheel is operating abnormally (if it is emitting any abnormal sounds, heat, or odors), stop using it immediately, unplug the power supply cable from the electrical outlet, and disconnect the other cables.
If you will not be using the racing wheel for an extended period of time, unplug its power supply cable from the electrical outlet.
The power outlet shall be installed near the equipment and shall be easily accessible.

Air vents

Make sure not to block any of the air vents on the racing wheel’s base. For optimal ventilation, make sure to do the following:
Position the wheel’s base at least 10 cm away from any wall surfaces.
Do not place the base in any tight spaces.
Do not cover the base.
Do not let any dust build up on the air vents.
For safety reasons, never use the pedal set with bare feet or while wearing only socks on your feet.
THRUSTMASTER® DISCLAIMS ALL RESPONSIBILITY IN THE EVENT OF INJURY RESULTING FROM THE USE OF THE PEDAL SET WITHOUT SHOES.
Warning – Injuries due to Force Feedback and repeated movements Playing with a Force Feedback racing wheel may cause muscle or joint pain. To avoid any problems:
Avoid lengthy gaming periods.
Take 10 to 15-minute breaks after each hour of play.
If you feel any fatigue or pain in your hands, wrists, arms, feet, or legs, stop playing and rest for a few hours before you start playing again.
Warning – Injuries due to Force Feedback and repeated movements (continued)
If the symptoms or pain indicated above persist when you start playing again, stop playing and consult your doctor.
Keep out of children’s reach.
During gameplay, always leave both hands correctly positioned on the wheel without letting it go completely.
During gameplay, never place your hands or your fingers under the pedals or anywhere near the pedal set.
During calibration and gameplay, never place your hand or your arm through the openings in the racing wheel.
Make sure that the racing wheel’s base is properly secured, as per this manual’s instructions.
Product to be handled only by users 16 years of age or older

HEAVY PRODUCT

Be careful not to drop the product on yourself or on anyone else!
Warning – Pedal set pinch hazard when playing
Keep the pedal set out of children’s reach.
During gameplay, never place your fingers on or anywhere near the sides of the pedals.
During gameplay, never place your fingers on or anywhere near the pedals’ rear base.
During gameplay, never place your fingers on or anywhere near the pedals’ front base.
Warning – Pedal set pinch hazard when not playing
Store the pedal set in a safe place, and keep it out of children’s reach.

UPDATING YOUR RACING WHEEL’S FIRMWARE

The firmware included in your racing wheel’s base can be updated to a more recent version featuring product enhancements.
To display the firmware version that your racing wheel is currently using and update it if required: on PC, visit https://support.thrustmaster.com.
Click Racing Wheels / T300 RS, then select Firmware and follow the instructions describing the download and installation procedure.

Important note:

In order to function on a PC, the USB sliding switch (5) on the racing wheel’s base must always be in the PC position before connecting the racing wheel’s USB cable to the PC.

INSTALLING THE RACING WHEEL ON ITS BASE

Align the connector positions using the arrows:

Base (1) connector: Arrow pointing upwards
Racing wheel (2) connector: Arrow pointing upwards
Once the connectors are correctly positioned, simply rotate the Thrustmaster Quick Release (12) device’s ring counterclockwise, while holding the racing wheel (2) in position.
Then, tighten the ring as much as you can: to do so, hold the ring in position and rotate the racing wheel clockwise.
Once you have installed the racing wheel, rotate it 180° (when facing the wheel, the Thrustmaster logo should be upside down) to access the small attachment screw located on the ring of the Thrustmaster
Quick Release (12) device. Use a large Phillips screwdriver to tighten the small attachment screw (do not use excessive force), turning it clockwise.
Do not use excessive force when tightening the small attachment screw (using a Phillips screwdriver)!
Stop turning the screw as soon as you feel some resistance.

ADJUSTING THE PEDALS’ HEIGHT AND SPACING

Using a Phillips screwdriver (not included), remove the 2 attachment screws holding the pedal heads to the pedal arms.
Next, adjust the pedal heads’ height and spacing to suit your preferred driving style:
6 different positions are available for the gas pedal.
6 different positions are available for the brake pedal.
Once you are happy with the height and spacing, replace and re-tighten the 2 attachment screws holding the pedal heads to the pedal arms.

ATTACHING THE RACING WHEEL

Attaching the racing wheel to a table or a desktop

Place the racing wheel on a table or any other horizontal, flat, and stable surface.
Insert the fastening screw (11) in the attachment system (10), then tighten the device by turning the screw counterclockwise, so that it feeds into the large threaded hole (9) located beneath the racing wheel until the wheel is perfectly stable.

WARNING: Never tighten the screw alone, without the attachment system in place! (This could damage the racing wheel.)

Attaching the racing wheel’s base to a cockpit

Place the racing wheel’s base on the cockpit shelf.
Drive two M6 screws (not included) through the cockpit shelf, then feed them into the two small screw threads located on the underside of the racing wheel.
- Important: The length of the two M6 screws must not exceed the thickness of the shelf + 12 mm; longer screws could cause damage to internal components located in the racing wheel’s base.
If required, tighten the standard attachment system by inserting the fastening screw in the large threaded hole.

Attaching the pedal set to a cockpit

Attach the pedal set using the small screw threads located on its underside.
Drive two M6 screws (not included) through the cockpit shelf, then feed them into the two small screw threads located on the underside of the pedal set.

Important: The length of the two M6 screws must not exceed the thickness of the shelf + 10 mm; longer screws could cause damage to internal components located in the pedal set.

MAPPING FOR PLAYSTATION®5 CONSOLES AND PLAYSTATION®4 CONSOLES

MAPPING FOR PC

SETTING UP THE RACING WHEEL FOR PLAYSTATION®5 CONSOLES AND PLAYSTATION®4 CONSOLES

Connect the pedal set to the connector (17) located at the back of the racing wheel’s base.
Connect the power supply cable to the connector (14) located at the back of the racing wheel’s base.
Plug the power supply cable into an electrical outlet with the same voltage specifications.
- For more information about this, please refer to the PLUGGING THE RACING WHEEL INTO AN ELECTRICAL OUTLET section, on page 4 of this manual.
Set the USB sliding switch (5) on the racing wheel’s base to PS5™-PS4™.
Connect the racing wheel’s USB connector (15) to one of the console’s USB ports.
Once your console is powered on, your racing wheel will calibrate itself automatically.
Press the racing wheel’s PS button (8) and sign in to your PlayStation®Network account, in order to be able to use the wheel.

You are now ready to play!

SWITCHING FROM PS5™ MODE TO PS4™ MODE AND VICE VERSA

Press and hold down the MODE button (6) for five seconds, and then release it.
The indicator light changes color, and the selection you have made is instantly saved in the racing wheel’s internal memory.

Important notes

The USB sliding switch (5) on the racing wheel’s base must always be set to the proper position (PS5™-PS4™) before connecting the wheel’s USB cable to the console.
To change the sliding switch’s position, disconnect the USB cable from the console and then change the position of the switch before reconnecting the USB cable to the console.
On PlayStation®5 consoles and PlayStation®4 consoles, with the USB sliding switch (5) in the PS5™-PS4™ position:
Don’t forget to press the racing wheel’s PS button (8) in order to be able to use the wheel.
The wheel is recognized in most games as a T300 RS wheel.
The wheel is functional in compatible games and in console menus.
The “CREATE/SHARE” and “PS” functions are functional on the wheel.
The list of games compatible with the PS5™ console and the PS4™ console is available at: https://support.thrustmaster.com (click Racing Wheels / T300 RS / Games settings). This list is updated regularly.

SETTING UP THE RACING WHEEL FOR PC

PC compatibility is not endorsed by Sony Interactive Entertainment.

Connect the pedal set to the connector (17) located at the back of the racing wheel’s base.
Connect the power supply cable to the connector (14) located at the back of the racing wheel’s base.
Plug the power supply cable into an electrical outlet with the same voltage specifications.
For more information about this, please refer to the PLUGGING THE RACING WHEEL INTO AN ELECTRICAL OUTLET section, on page 4 of this manual.
Set the USB sliding switch (5) on the racing wheel’s base to PC.
Go to https://support.thrustmaster.com, then select Racing Wheels / T300 RS to download the drivers and the Force Feedback software for PC.
Once the download is complete, launch the installation, and follow the on-screen instructions to connect the wheel’s USB plug to your PC and complete the installation. The racing wheel automatically self-calibrates. The indicator light (6) is green.
Once the installation is complete, click Finish and restart your computer.
Select Start / All Programs / Thrustmaster / FFB Racing Wheel / Control Panel to open the Game Controllers window.
The Game Controller’s window displays the racing wheel’s name (Thrustmaster T300RS Racing Wheel) with the status OK.
Click Properties to configure your wheel in the T300 control panel:

Test Input tab: lets you test and view the action buttons, directional buttons, wheel and pedal axes, and adjust the wheel’s rotation angle in your PC games.
Test Forces tab: lets you test 12 Force Feedback effects.
Gain Settings tab: lets you adjust the power of the Force Feedback effects in your PC games.

General notes:

On PC, always remember to completely close the Game Controllers window by clicking OK before launching the game.
Your racing wheel’s firmware version is displayed in the upper right-hand corner of the control panel tabs.
You are now ready to play!

Important note:

In order to function on a PC, the USB sliding switch (5) on the racing wheel’s base must always be in the PC position before connecting the racing wheel’s USB cable to the PC.

AUTOMATIC RACING WHEEL AND PEDAL SET CALIBRATION

The wheel automatically self-calibrates when you plug the racing wheel into an electrical outlet and connect the racing wheel’s USB connector to the console.
During this phase, the racing wheel will rotate quickly towards the left and the right, covering a 1080-degree angle, before stopping at the center.

WARNING:

Never touch the racing wheel during the self-calibration phase!
(This could result in improper calibration and/or personal injuries.)
Never connect the pedal set to the racing wheel’s base (or disconnect it from the base) when it is connected to the console or during gameplay (this could result in improper calibration).
Always connect the pedal set before connecting the racing wheel to the console.
Once the racing wheel’s calibration is complete and the game has been started, the pedals are automatically calibrated after a few presses.

WARNING:

Never press the pedals during the racing wheel’s self-calibration phase or while a game is loading!
(This could result in improper calibration.)
If your racing wheel and/or pedal set do not function correctly, or if they seem to be improperly calibrated:
Power off your console and completely disconnect the racing wheel. Then reconnect all cables (including the power supply cable and the pedal set), and restart your console and your game.

INTERNAL TEMPERATURE SENSOR

The wheel’s cooling system is composed of a heat sink and a fan.
A thermostat monitors the wheel’s internal temperature.
When you are using the wheel in a game:
The cooling fan starts up when the wheel has reached a certain temperature (after a few minutes of gameplay, depending on the strength of the Force Feedback effects used).
The power of the Force Feedback effects automatically decreases as soon as the wheel reaches a much higher temperature level (to protect the motor). The power of these effects automatically increases as soon as the temperature slightly decreases.
When you’re done playing: due to the motor’s thermal inertia, the cooling fan continues to operate until the temperature drops below the fan’s startup level. Your wheel has been designed in this way in order to facilitate cooling, and to protect the motor (this may take from 5 to 45 minutes, depending on the temperature reached while using the wheel in a game).

MODE BUTTON AND INDICATOR LIGHT (6)

MODE button for the pedal set

You can electronically swap the accelerator and clutch pedals.

Procedure:

Simultaneously press and hold down the MODE + L3 + R3 buttons (located on the T300 racing wheel’s base) for five seconds, and then release them.
The racing wheel’s internal memory stores whether the pedals have been swapped around or not, and the indicator light (6) flashes differently according to the mode you have selected:

GAS AND CLUTCH PEDALS	Color of the MODE indicator light (6)
Switching to INVERTED mode	**Flashes five times after the procedure,

then continuously flashes once every eight seconds.
Switching to NORMAL mode| Flashes once after the procedure then does not flash continuously.**

Other information regarding the MODE button

To learn more about the MODE button and indicator light, please visit https://support.thrustmaster.com. Click Racing Wheels / T300 RS, and then select Manual or.

FAQ

HELP FILES AND FAQS

Please visit https://support.thrustmaster.com. Click Racing Wheels / T300 RS, and then select Manual or FAQ.

CONSUMER WARRANTY INFORMATION

Worldwide, Guillemot Corporation S.A., whose registered office is located at Place du Granier, B.P. 97143, 35571
Chantepie, France (hereinafter “Guillemot”) warrants to the consumer that this Thrustmaster product shall be free from defects in materials and workmanship, for a warranty period which corresponds to the time limit to bring an action for conformity with respect to this product. In the countries of the European Union, this corresponds to a period of two (2) years from delivery of the Thrustmaster product. In other countries, the warranty period corresponds to the time limit to bring an action for conformity with respect to the Thrustmaster product according to applicable laws of the country in which the consumer was domiciled on the date of purchase of the Thrustmaster product (if no such action exists in the corresponding country, then the warranty period shall be one (1) year from the original date of purchase of the Thrustmaster product).
Should the product appear to be defective during the warranty period, immediately contact Technical Support, who will indicate the procedure to follow. If the defect is confirmed, the product must be returned to its place of purchase (or any other location indicated by Technical Support).
Within the context of this warranty, the consumer’s defective product shall, at Technical Support’s option, be either replaced or returned to working order. If, during the warranty period, the Thrustmaster product is subject to such reconditioning, any period of at least seven (7) days during which the product is out of use shall be added to the remaining warranty period (this period runs from the date of the consumer’s request for intervention or from the date on which the product in question is made available for reconditioning if the date on which the product is made available for reconditioning is subsequent to the date of the request for intervention). If permitted under applicable law, the full liability of Guillemot and its subsidiaries (including for consequential damages) is limited to the return to working order or the replacement of the Thrustmaster product. If permitted under applicable law, Guillemot disclaims all warranties of merchantability or fitness for a particular purpose.
This warranty shall not apply: (1) if the product has been modified, opened, altered, or has suffered damage as a result of inappropriate or abusive use, negligence, an accident, normal wear, or any other cause unrelated to a material or manufacturing defect (including, but not limited to, combining the Thrustmaster product with any unsuitable element, including in particular power supplies, rechargeable batteries, chargers, or any other elements not supplied by Guillemot for this product); (2) if the product has been used for any use other than home use, including for professional or commercial purposes (game rooms, training, competitions, for example); (3) in the event of failure to comply with the instructions provided by Technical Support; (4) to software, said software being subject to a specific warranty; (5) to consumables (elements to be replaced over the product’s lifespan: disposable batteries, audio headset, or headphone ear pads, for example); (6) to accessories (cables, cases, pouches, bags, wrist straps, for example); (7) if the product was sold at a public auction.
This warranty is non-transferable.
The consumer’s legal rights with respect to laws applicable to the sale of consumer goods in his or her country are not affected by this warranty.

Additional warranty provisions

During the warranty period, Guillemot shall not provide, in principle, any spare parts, as Technical Support is the only party authorized to open and/or recondition any Thrustmaster product (with the exception of any reconditioning procedures which Technical Support may request that the consumer carry out, by way of written instructions – for example, due to the simplicity and the lack of confidentiality of the reconditioning process – and by providing the consumer with the required spare part(s), where applicable).
Given its innovation cycles and in order to protect its know-how and trade secrets, Guillemot shall not provide, in principle, any reconditioning notification or spare parts for any Thrustmaster product whose warranty period has expired.
In the United States of America and in Canada, this warranty is limited to the product’s internal mechanism and external housing. In no event shall Guillemot or its affiliates be held liable to any third party for any consequential or incidental damages resulting from the breach of any express or implied warranties. Some States/Provinces do not allow limitations on how long an implied warranty lasts or exclusion or limitation of liability for consequential or incidental damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from State to State or Province to Province.

Liability

If permitted under applicable law, Guillemot Corporation S.A. (hereinafter “Guillemot”) and its subsidiaries disclaim all liability for any damages caused by one or more of the following: (1) the product has been modified, opened or altered; (2) failure to comply with assembly instructions; (3) inappropriate or abusive use, negligence, an accident (an impact, for example); (4) normal wear; (5) the use of the product for any use other than home use, including for professional or commercial purposes (game rooms, training, competitions, for example). If permitted under applicable law, Guillemot and its subsidiaries disclaim all liability for any damages unrelated to a material or manufacturing defect with respect to the product (including, but not limited to, any damages caused directly or indirectly by any software, or by combining the Thrustmaster product with any unsuitable element, including in particular power supplies, rechargeable batteries, chargers, or any other elements not supplied by Guillemot for this product).

FCC

DECLARATION OF CONFORMITY

CANADIAN COMPLIANCE NOTICE: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
USA COMPLIANCE NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

TECHNICAL SUPPORT

https://support.thrustmaster.com
UK: 020 3147 4889
US: 866-889-5036
Canada: 866-889-2181

COPYRIGHT

©2022 Guillemot Corporation S.A. All rights reserved. Thrustmaster® is a registered trademark of Guillemot Corporation S.A. Manufactured and distributed by Guillemot Corporation S.A. All other trademarks and brand names are hereby acknowledged and are the property of their respective owners. Contents, designs, and specifications are subject to changes without notice and may vary from one country to another. Photos and illustrations are not binding. Designed in North America and Europe, made in China.
For use exclusively with PlayStation®5 consoles and PlayStation®4 consoles.
PlayStation”, “PS5”, “PS4” and “PlayStation Shapes Logo” are registered trademarks or trademarks of Sony Interactive Entertainment Inc. All rights reserved. All other trademarks are the property of their respective owners. Manufactured and distributed under license from Sony Interactive Entertainment LLC.
WARNING: This product can expose you to chemicals including Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

ENVIRONMENTAL PROTECTION RECOMMENDATION

In the European Union, the UK, and Turkey: At the end of its working life, this product should not be disposed of with standard household waste, but rather dropped off at a collection point for the disposal of Waste Electrical and Electronic Equipment (WEEE) for recycling.
This is confirmed by the symbol found on the product, user manual, or packaging.
Depending on their characteristics, the materials may be recycled. Through recycling and other forms of processing Waste Electrical and Electronic Equipment, you can make a significant contribution towards helping to protect the environment.
Please contact your local authorities for information on the collection point nearest you.
For all other countries: Please adhere to local recycling laws for electrical and electronic equipment.
Retain this information. Colors and decorations may vary.
Plastic fasteners and adhesives should be removed from the product before it is used. www.thrustmaster.com
Applicable to EU, UK, and Turkey only