CLIM ART 416085LP Incredibly Durable Rain Guards Installation Guide
- June 14, 2024
- Clim Art
Table of Contents
**CLIM ART 416085LP Incredibly Durable Rain Guards Installation Guide
**
CAUTION! Before installation, ensure the deflectors are compatible with your vehicle. The size and model of each set is unique and never universal.
- In the event you are having difficulty adjusting the deflectors, please follow the procedures below:
- Make sure you install the deflector on the correct side of the vehicle. Otherwise, try to install the deflector on the other side.
- Try to adjust the position of the deflector by moving it up, down, or sideways.
- Before embarking on a trip, ensure the deflectors are securely installed.
- Do not use automatic car washes.
- Do not use cleaners that contain dissolving agents.
- It is recommended not to wash the vehicle for the first 24 hours after installation, as it can cause the deflectors to detach.
COMPLETE SET
4(2) Piece Sets (the product may differ from the illustration in the instructions).
-
Front Driver Side Window Deflector
-
Front Passenger Side Window Deflector
-
Rear Driver Side Window Deflector
-
Rear Passenger Side Window Deflector
-
Instruction manual
-
Degreasing Pad (2 pieces)
Preparing the vehicle and the product for installation
- CAUTION! Before installing the deflector, ensure the deflector is compatible with your vehicle’s model.
- Attach the deflector to the installation site BEFORE removing the tape’s protective liner. Make sure the deflector looks pleasing on the door of the vehicle.
- Make sure the installation site is completely dry and clean (take care when removing all dirt and/or dust).
- Deflectors are recommended for installation indoors without direct exposure to sunlight and moisture and should be done in temperatures ranging from +15°C to +25°C.
INSTALLATION
-
Wipe the installation site with the decreasing pad provided in the set (CAUTION! If you neglect this step the deflectors won’t be installed properly and may disengage from the vehicle door).
-
Attach the deflector and press it slightly against the most suitable installation site (in your view) on the vehicle door.
-
Completely remove the tape protective liner by pulling on the free ends on the installed and aligned deflec- tor(s) in a sliding manner.
-
Remove 1 inch (2 cm) of the tape liner from both flanges (front and rear) of the deflector.
-
If you have the 4-Piece Set, first attach the Front Driver Side Window Deflector and then the rear one. Align height of both the rear and front deflectors. Both parts should visually produce one straight line.
-
Tightly press the deflector to the installation site from one flange to another.
ATTENTION! IMPORTANT INFORMATION!
ATTENTION! Read the installation instructions carefully and follow all
POINTS in the text! Incorrectly installed deflectors can be dangerous.
- In the event you are having difficulty adjusting the deflectors, please follow the procedures below:
- Make sure you install the deflector on the correct side of the vehicle. Otherwise, try to install the deflector on the other side.
- Try to adjust the position of the deflector by moving it up, down, or sideways.
- IMPORTANT INFORMATION! Clean the grease off the installation surface with a supplied alcohol wipe. If the deflector installation process is not followed, the manufacturer does not guarantee the secure installation of the product.
- Before embarking on a trip, ensure the deflectors are securely installed.
- Do not use automatic car washes.
- Do not use cleaners that contain dissolving agents.
- It is recommended not to wash the vehicle for the first 24 hours after installation, as it can cause the deflectors to detach.