Promethean AP-MM-RCU Activpanel Merlyn Remote Instructions

Promethean AP-MM-RCU Activpanel Merlyn Remote

PRODUCT FEATURES

• Navigation Controls:
  The remote typically includes buttons for navigating through menus and options on the ActivPanel.

• Source Selection:
  You can use the remote to switch between different input sources, such as HDMI, VGA, or USB.

• Volume Control:
  Adjusting the volume is a common feature found on these remotes.

• Power Control:
  The remote allows you to power the ActivPanel on and off.

• Function Buttons:
  Some remotes have dedicated buttons for specific functions, such as accessing the interactive whiteboard features, freezing the screen, or capturing screenshots.

• Numeric Keypad:
  Depending on the model, a numeric keypad might be present for entering numerical values or navigating through content.

• Menu Access:
  A button to access the on-screen menu for adjusting settings and configurations.

• Help and Support:
  Some remotes have a dedicated button to access help or support features.

IMPORTANT SAFETY INSTRUCTIONS

Carefully read, understand, and follow these instructions.

• Handle this product and its accessories with care.
• Do not use this product or its accessories near water or liquids that can electrically short the product and accessories.
• Do not handle or touch the product with wet hands.
• Do not expose the product to rain or high-humidity areas. Do not attempt to repair this product yourself.  Contact Merlyn Mind for warranty repairs.
• Use only two alkaline AA batteries for the remote control. Always observe proper polarity when installing batteries. Do not mix old and new batteries.
• Do not mix different brands of batteries.
• Do not use batteries if they are damaged.
• Risk of explosion if the battery is replaced incorrectly or with the incorrect type. Replace the battery only with the same or equivalent type recommended by the manufacturer.
• Dispose of used batteries according to the manufacturer’s instructions.

Hereby, Merlyn Mind declares that the radio equipment type AP-MM-RCU is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of conformity is available at the following internet address: merlyn.org/getstartedAP.

FCC STATEMENT

FCC ID : 2AYDXAP-MM-RCU

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help

ISED STATEMENTS

IC: 26781-APMMRCU

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

FULL USER GUIDE, WARRANTY, AND TROUBLESHOOTING
For the full user guide, warranty statement, and troubleshooting guide visit: merlyn.org/getstartedAP or scan the QR code

RADIATION EXPOSURE STATEMENT
This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

THE BLUETOOTH® WORD MARK AND LOGOS ARE REGISTERED TRADEMARKS OWNED BY BLUETOOTH SIG, INC. AND ANY USE OF SUCH MARKS BY MERLYN MIND INC. IS UNDER LICENSE. OTHER TRADEMARKS AND TRADE NAMES ARE THOSE OF THEIR RESPECTIVE OWNERS.  ALL OTHER NAMES OF SYSTEMS, PRODUCTS, AND SERVICES ARE TRADEMARKS OF THEIR RESPECTIVE OWNERS. IN THE MANUAL, THE TM OR ® MARKS ARE NOT SPECIFIED. FEATURES AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.  © 2023 MERLYN MIND™ INC. ALL RIGHTS RESERVED. MERLYN MIND™ IS A TRADEMARK OR A REGISTERED TRADEMARK OF MERLYN MIND™ INC.

Merlyn Mind, Inc. 8 West 40th Street, Floor 20 New York, NY 10018 U.S.A.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>