thermaltake CA-1D5-00S1WN-00 Core V21 SPCC Micro ATX Cube Computer Chassis User Manual
- June 14, 2024
- thermaltake
Table of Contents
- Specification
- Accessory
- Warning and Notice
- Side Panel Disassembly
- PSU Installation
- Motherboard Installation
- PCI Slot Usage
- Air Cooling Installation
- Liquid Cooling Installation
- Bracket Installation
- I/O Panel Placement Guide
- Stacking Installation
- Leads Installation
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Core V21
Your Build. Our Core
User ‘s Manual
Picture for reference only
Information in the user manual is subject to change without notice
Specification
Case Type | Micro Case |
---|---|
Dimension (HWD) | 336 x 320 x 424 mm (13.2 x 12.6 x 16.7 inch) |
Side Panel | Transparent Window |
Material | SPCC |
Cooling System | Front (intake) |
200 x 200 x 30 mm fan (800rpm, 13dBA)
Drive Bays -Hidden| 3 x 3.5″ , 3 x 2.5″
Expansion Slots| 5
Motherboard| 6.7″ x 6.7″ (Mini ITX) , 9.6″ x 9.6″ (Micro ATX)
I/O Port| USB 3.0 x 2, HD Audio x 1
Clearance| CPU cooler height limitation: 185mm
VGA length limitation: 350mm
PSU length limitation: 200mm (Without bottom fan)
Accessory
Figure | Parts Name | Qty | Used for |
---|---|---|---|
Screw # 6-32 x 6 mm | 4 | PSU | |
PSU Rubber | 2 | PSU (Bottom) | |
FSU Bracket 1 | 1 | FSU | |
PSU Bracket 2 | 1 | PSU | |
Screw # 6-32 x 6 mm | 1 | PSU Bracket | |
Stand-off # 6-32 x 6 mm | 2 | Motherboard | |
Screw # 6-32 x 5 mm | 9 | Motherboard | |
Screw M3 x 6 mm | 18 | 2.5’HDD | |
Screw 0 5 x 10 mm | 12 | Fan | |
Cable Tie | 7 | Cable Management |
|
Screw # 6-32 x 15 mm| 2| Stacking
| Flange Nut # 6-32| 2| Stacking
| Stacking Gasket| 2| Stacking
Warning and Notice
Warning!
-
Height limit for the CPU heatsink:
The height limit for the CPU heatsink is 185 mm (7.3 inches). -
Length limit for the VGA (graphics card):
The length limit for the VGA (graphics card) is 350 mm (13.8 inches).
Side Panel Disassembly
Remove the screws on the back of the chassis, and open the side panel.
PSU Installation
- Place the power supply in proper location and secure it with screws.
- Place the PSU rubber on bracket.
- Secure bracket with the case by locking hook.
- Install the bracket in proper location and secure it with screws.
Motherboard Installation
Install the motherboard in proper location and secure it with screws.
3.5″ & 2.5″ HDD Installation
- Pull the HDD tray out.
- Place the 2.5” or 3.5” hard drive on the tray and secure it with screws.
- Slide the HDD tray back to the HDD cage.
2.5 ” HDD Installation
Place the 2.5” HDD on proper location and secure it with screws.
PCI Slot Usage
- Loosen the screws with a screwdriver.
- Install the PCI card in proper location and secure it with screws.
Air Cooling Installation
Fan Support:
Front:
1 x 120mm or 2 x 120mm
1 x 140mm or 2 x 140mm
1 x 200mm
Top:
1 x 120mm or 2 x 120mm or 3 x 120mm or 4 x 120mm
1 x 140mm or 2 x 140mm
Rear:
1 x 120mm
1 x 140mm
Bottom:
1 x 120mm or 2 x 120mm
Left / Right Side:
1 x 120mm or 2 x 120mm
1 x 140mm or 2 x 140mm
Liquid Cooling Installation
Radiator Support:
Front:
1 x 120mm or 1 x 240mm
1 x 140mm
Top:
2 x 120mm or 2 x 240mm
1 x 140mm or 1 x 280mm
Rear:
1 x 120mm
Left / Right Side:
1 x 120mm or 1 x 240mm
1 x 140mm or 1 x 280mm
Bracket Installation
I/O Panel Placement Guide
Stacking Installation
Note:…………………………………
Leads Installation
Leads Installation Guide
Case LED Connection / On the front of the case, you can find some LEDs and
switch leads. Please consult your user manual of your motherboard
manufacturer, then connect these leads to the panel header on the motherboard.
USB 3.0 connection /
- Make sure your motherboard supports USB 3.0 connection.
- Connect the USB 3.0 cable to the available USB 3.0 port on your computer.
Audio Connection / Please refer to the following illustration of Audio connector and your motherboard user manual.
Please select the motherboard which used AC’97 or HD Audio(Azalia),(be aware of that your audio supports AC’97 or HD Audio (Azalia)) or it will damage your device(s).
Thermaltake Power Supply Series (Optional)
As today’s technology updates rapidly, consumers are always requesting for
higher and higher PC performance, which also increases loads to power
supplies. Therefore, selecting a suitable and reliable power supply becomes a
necessary lesson for all PC users.
Why Choose Thermaltake Power Supply?
Quality From Within
Every power supply units from Thermaltake should pass a very strict quality
control before sent to customers, including BIT(Burn-in-test) for over 8
continuous hour in a 45℃ room to test if a unit can run normally under usual
scene, and Hipot test to ensure the power supply unit can survive and protect
both users and their systems when the voltage volume surges.
Less is more
In order to prevent wasted energy, all of Thermaltake’s products should have
at least 80% of transforming efficiency, and we’re also one of the
manufacturers that have the most 80 PLUS certificates. Because Thermaltake
knows how to save for the earth and customers; we know what makes less to be
more.
Being Supportive By All Means
A product with better quality can have longer life and working hours but less
pollution. Thermaltake obeys and respects all environmental clauses in all
countries and make sure all of our products are both user and environmental-
friendly. Therefore we show our supports by giving 2 to7-year warranties,
which is not only a quality commitment to the users, but also love to this
planet by reducing resources and wastes.
Thermaltake has several power supply product lines; please refer to our
official website and Facebook Fan Page for more detail information!
Brand official website:http://www.thermaltake.com/
Global Facebook : https://www.facebook.com/ThermaltakeInc
Taiwan Facebook: https://www.facebook.com/ThermaltakeTW
© 2014 Thermaltake Technology Co., Ltd. All Rights
Reserved. A-2014.10
All other registered trademarks belong to their respective companies.
www.thermaltake.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>