aosite A5 Cabinet Locks Babies Instruction Manual

aosite A5 Cabinet Locks Babies

Product Information

Specifications:

• Product Name: Safety Lock
• Manufacturer: 3M
• Model Number: 3

Product Usage Instructions

Step 1: Adjusting the Length

1. Remove part A.
2. Adjust the length according to your requirements.
3. Put back part A and lock it. (Refer to Figure 2)

Step 2: Attaching the Lock

4. Peel off the adhesive film.
5. Press the latch against the surface firmly for 10 seconds. (Refer to Figure 3)

Step 3: Unlocking the Device

6. To unlock the device, push button B sideways and press the buttons on both sides. (Refer to Figure 4)

Please note: For better stickiness, it is recommended to wait for about 24 hours after installation.

Troubleshooting Tips

If You Are Not Strong Enough

1. You can use a tool to adjust the adjustment straps that have been secured. (Refer to Figure 5)

Wetting the Adhesive Base

2. Wet the adhesive base with alcohol spray. (Refer to Figure 6)

Removing Residual Adhesive

3. Remove the adhesive base.
4. Remove any residual adhesive from the base. (Refer to Figure 7)

Attaching to the White Base

5. Attach to the white base with the spare adhesive provided.
6. Place back on the locking. (Refer to Figure 8)

Warm Tips

1. During installation, do not touch the adhesive with your hands or reuse it, as it will weaken the adhesive.
2. It is recommended to rotate the lock when not in use to ensure smooth opening and closing.

FAQ

• Q: How can I contact customer service?
  A: You can reach out to our customer service team at aosite_support@163.com.

How to Use

1. Remove part A.
2. Adjust the length according to your requirements. Put back part A and lock it. (Figure 2).
3. Peel off the adhesive film and press the latch against the surface for 10 seconds. (Figure 3).
4. To unlock the device, push button B sideways and press the buttons on both sides. (Figure 4).
5. Please wait for about 24 HOURS for better stickiness.

1. If you are not strong enough you can use a tool to adjust the adjustment straps that have been secured. (Figure 5).
2. Wet the adhesive base with alcohol spray. (Figure 6 ).
3. Remove the adhesive base and remove any residual adhesive from the base. (Figure 7).
4. Attach to the white base with the spare adhesive provided and place back on the locking. (Figure 8).

Warm Tips

Notes.

1. During installation, do not touch the adhesive with your hands or reuse it, which will weaken the adhesive.
2. It needs to be rotated when not in use to ensure the lock opens and closes smoothly.

Customer Service: aosite_support@163.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>