TiLite EZ-Ti Manual Wheelchairs Instruction Manual

EZ-Ti Manual Wheelchairs
Instruction Manual

How to order

Catalog

1. Identify CMDs you wish to order and fill out. Please confirm compatibility with the chair you’re ordering.

2. Fill out the catalog page corresponding to that CMD with the required information for us to complete your request.
   • EZ-Ti ID, PO#, or Quote# if available.
   • Measurements, selections, and special instructions if necessary.

3.  Email the filled out page(s) to chairs.tilite@permobil.com and include Order Form if applicable.

Order Forms

1. Identify CMDs you wish to order and fill out. Please confirm compatibility with the chair you’re ordering.

2. In the “Notes” section on the last page of the order form, include the following information:
   • CMD number(s) being requested.
   • Measurements, selections, and special instructions if necessary.

3. Submit Order Form via email (chairs.tilite@permobil.com) or fax 509-586-2413.

EZ-Ti

1. Identify CMDs you wish to order and fill out. Please confirm compatibility with the chair you’re ordering.

2. In the “CMD” section on the Summary page of EZ-Ti, include the following information:
   • CMD number(s) being requested.
   • Measurements, selections, and special instructions if necessary.

3. Submit quote request via EZ-Ti.
   Please note, custom requests may impact quote turnaround time and chair build time. Pricing for these custom options may vary based on the amount of added labor and material costs.

Adapted sized and shaped aluminum footplate CMD #4 Clinical rationale
Modification indicated for clients who present with lower extremity positioning and shape that cannot be accommodated with the standard size footplate on the order form.
Available on:
Tillite TR, Tillite TRA, Tillite Aero T, Tillite ZR, Tillite ZRA, Tillite Aero Z, Tillite Aero X, Tillite 2GX, Tillite TWIST, Tillite TX1, Tillite R2GX
Notes:

• Footplates that are 10” (rearward) or deeper will require a strap to support the rear of the footplate.
• Footplate slots are optional.
• Forward mounted footrests are limited to 4” past standard.
• For folding model wheelchairs, the footrest width will be limited to the 18” wide standard equivalent.
• May not work with all chair configurations.

Required information
(Insert required information for CMD-E to complete this request)
Width: ………………… Depth:………….
Mounting-hole Location: …………
If side, heel or toe containment is wanted:……………….
Height of wall supports: ……………………
Identify the locations of the containments:……………..

Adapted footrest and/or front seat width CMD #8

Clinical rationale
Modification indicated for clients who have specific positioning needs for their lower extremities that are not indicated on the order form. This modification allows the clinician and the ATP to match the precise size of the client for optimal fit and performance.
Available on:
Tillite TR, Tillite TRA, Tillite ZR, Tillite ZRA, Tillite Aero T, Tillite Aero Z
Notes:

• May require a set of squared off extensions in some configurations.
• Footrest width must be at least 2” narrower than seat width on T-series chairs, and 2 1/2” narrower than seat width on Z-series chairs.
• May not work with all chair configurations.

Required information
(Insert required information for CMD-E to complete this request)
Please round desired width to nearest 1/2”
Front seat width desired:…………………..
Footrest width desired: ………….
Unique sized footrest loop CMD #21 Clinical rationale
Modification indicated for individuals who require a unique sized foot loop to accommodate size and shape of feet and lower extremities.
Available on:
Tillite TR, Tillite Tantalite ZR, Tillite ZRA, Tillite Aero T, Tillite Aero Z
Notes:

• Only available on Rigid Frames.
• Optional ABS cover (see CMD 050).
• Angle Adjustable option is not available with this adaptation (see CMD 004).
• May not work with all chair configurations.

Required information
(Insert required information for CMD-E to complete this request)
Width: …………
Depth:………………..
Multiple looped titanium footrest CMD #22 Clinical rationale
Modification indicated for individuals who require support anteriorly of the frame of the chair to address unique lower extremity positioning needs.
Available on:
Tillite TR, Tillite TRA, Tillite Aero T, Tillite ZR, Tillite ZRA, Tillite Aero Z
Notes:

• Not available with angle-adjustable footplate. (See CMD 4 for Angle Adjustable options).
• Available on rigid chairs only.
• Minimum front loop will be 2.25”.
• This adaptation is to call out a second loop that will be welded opposite of the standard loop of the footrest.
• Optional ABS cover (see CMD 050).

Required information
(Insert required information for CMD-E to complete this request)
Length in front of footrest:……………
Length behind footrest: ……………..
Nylon covered foam pad on footrest CMD #25 Clinical rationale
Modification is indicated for individuals who may be at increased risk of skin breakdown on their feet.
Available on:
Tillite TR, Tillite TRA, Tillite Aero T, Tillite ZR, Tillite ZRA, Tillite Aero Z
Notes:

• Only available on Rigid chairs.
• Only available for Titanium w/ Flat ABS Cover or Angle Adjustable Footrests.
• Option of 1” or 2” Foam Pad.
• Foam Pad is covered with Ballistic Nylon. May not work with all chair configurations.

Required information
(Insert required information for CMD-E to complete this request) Foam pad size: ❑ 1” OR ❑ 2”
Forward mounted footplate CMD #30 Clinical rationale
Modification is indicated for individuals whose lower extremity positioning cannot be accommodated by combination of seat depth, frame depth and front angle bend.
Available on:
Tillite TR, Tillite TRA, Tillite ZR, Tillite ZRA, Tillite Aero T, Tillite Aero Z
Notes:

• Available on rigid chairs only.
• Can be:
• Angle Adjustable (no charge).
• Titanium w/ Flat ABS cover.
• Titanium Open Loop.
• May not work with all chair configurations.

No footplates on rigid models CMD #32 Clinical rationale
Modification is indicated for individuals who utilize a bilateral lower extremity propulsion technique and require the benefits of a rigid frame manual wheelchair.
Available on:
Tillite TR, Tillite TRA, Tillite ZR, Tillite ZRA, Tillite Aero T, Tillite Aero Z
Notes:

• Signed CAD drawing required.
• Front Frame Rigidize Bar is required.
• May not work with all chair configurations.
• Standard Rigidize Bar location:
  For Z-series: 4”, For T-series: 4”.

Required information
(Insert required information for CMD-E to complete this request) Rigidize Bar placement dimensions for T-chairs:
Depth:……
Rigidize Bar placement dimensions for Z-chairs:
Depth: ………………
Height: ……………………
Angle: ………………
One piece flip-up footplate on rigid and folding chairs CMD #35

Clinical rationale
Modification indicated for people who may require footplate to flip up in order to get feet on the ground, ie, a stand-pivot transfer.
Available on:
Tillite TR, Tillite TRA, Tillite ZR, Tillite ZRA, Tillite Aero T, Tillite Aero Z
Notes:

• Extra rigidize bar is required.
• Angle Adjustable footplate only.
• Signed CAD needed.
• Rigidizer Bar dimensions are different for T-series and Z-series chairs.
• Aero Z chairs will have these footrests clamped to the front of the frame.
• May not work with all chair configurations.

Required information
(Insert required information for CMD-E to complete this request)
Flip-up footplate pivot on : ❑ Right OR ❑ Left Standard Rigidize Bar location: For Z-series: 4”, For T-series: 4”
Custom Rigidize Bar
Rigidize Bar placement dimensions for T-chairs:
Depth:..
Rigidize Bar placement dimensions for Z-chairs:
Depth:…………….. Height: ………………… Angle: ……………
Two piece flip-up footplates CMD #40![TiLite EZ-Ti Manual Wheelchairs

• Two piece](https://manuals.plus/wp-content/uploads/2023/04/TiLite-EZ-Ti- Manual-Wheelchairs-Two-piece.png)

Clinical rationale
Modification indicated for individuals who present unique foot positioning in a rigid chair that cannot be accommodated via one piece footplate.
Available on:
Tillite TR, Tillite TRA, Tillite ZR, Tillite ZRA, Tillite Aero T, Tillite Aero Z
Notes:

• Extra rigidizer bar is required.
• Footrest will be aluminum powder coated black.
•  Signed CAD needed.
• Rigidize Bar dimensions are different for T-series and Z-series chairs.
• Aero Z footrests will be clamped to front of frame. Not available with V-front end.
• May not work with all chair configurations.

Required information
(Insert required information for CMD-E to complete this request)
Footrest Type (Select one):
❑ Standard Flip-up ❑ Angle Adjustable Flip-up
❑ Depth Adjustable Flip-up ❑ Depth and Angle Adjustable Flip-up Standard Rigidize Bar location: For Z-series: 4”, For T-series: 4”
Rigidize Bar placement dimensions for T-chairs:
Depth: …………….
Rigidize Bar placement dimensions for Z-chairs:
Depth: …………….. Height: ……………. Angle: ………………
Unique sized footrest risers CMD #42

Clinical rationale
Modification indicated to provide support for individuals that have a lower leg length that standard footrest height will not accommodate.
Available on:
Tillite TR, Tillite TRA, Tillite ZR, Tillite ZRA, Tillite Aero T, Tillite Aero Z
Notes:

• Only available on Rigid Frames.
• Only available with Angle Adjustable footplate (this will not work on flip-back or titanium ABS/Open Loop footrest options).
• Maximum footrest riser height is 3” under this CMD.
• May not work with all chair configurations.

Required information
(Insert required information for CMD-E to complete this request)
Riser height:
❑ 1” ❑ 3” ❑ 5”
Weighted footrest CMD #45

Clinical rationale
Modification indicated for individuals who may have had a lower extremity amputation and require additional weight at the front of the chair for balance.
Available on:
Tillite TR, Tillite TRA, Tillite ZR, Tillite ZRA, Tillite Aero T, Tillite Aero Z
Notes:

• Only available on non-pediatric rigid chairs.
• Selectable weights range from 5 to 20 lb, in 1 lb increments.
• Final weight will be within 1/2 lb of call-out.
• Not available with flip-back.
• May not work with all chair configurations.
• For weights over 7 lb, a Titanium open loop footrest must be selected for this adaptation to bolt to.

Required information
(Insert required information for CMD-E to complete this request)
Added footrest weight: …………..
Adapted shaped/sized ABS footplate CMD #50

Clinical rationale
Modification indicated for individuals who present with lower extremity positioning that standard size cover does not accommodate.
Available on:
Tillite TR, Tillite TRA, Tillite ZR, Tillite ZRA, Tillite Aero T, Tillite Aero Z
Notes:

• Available on rigid chairs only.
• Titanium open loop footrest may be required.
• May require a squared off footrest adaptation (see CMD 071) or other footrest adaptation.
• Available adaptations include, but are not limited to, depth and width.
• Contact customer service for additional variations. May not work with all chair configurations.

Required information
(Insert required information for CMD-E to complete this request)
ABS footrest dimensions:
Depth:…….
Width:…………….
2” sided ABS footrest cover CMD #49 Clinical rationale
Modification indicated for individuals who require support laterally on their footrest to keep maintain positioning on the footrest.
Available on:
Tillite TRA, Tillite ZR, Tillite ZRA, Tillite Aero T, Tillite Aero Z
Notes:

• Available on rigid chairs only.
• Available adaptations include, but are not limited to, depth and width.
• Contact customer service for additional variations.
• May not work with all chair configurations.

Required information
(Insert required information for CMD-E to complete this request)
ABS sided cover dimensions:
Depth: …………. Width:……………
Lip Height (choose from 1”, 1.5” or 2”):………………………
Description or diagram of unique shape:

Tubular flip-up footplates CMD #61

Clinical rationale
Modification indicated for individuals who require or prefer a loop style footrest instead of a plastic style footrest.
Available on:
Tillite TR, Tillite TRA, Tillite ZR, Tillite ZRA, Tillite Aero T, Tillites Aero Z, Tillite Aero X, Tillites 2GX
Notes:

• Rigid frames require extra rigidize bar (see CMD 40).
• The footrest loops will only be made up to an 18” front-width equivalent.
• Not available with V-front end.
• May not work with all chair configurations.

Titanium angle-adjustable footrest extensions CMD #55

Clinical rationale
Modification indicated for individuals who require/desire optimal weight and strength for their footrest extensions.
Available on:
Tillite TR, Tillite TRA, Tillite ZR, Tillite ZRA, Tillite Aero Z, Tillite Aero T
Notes:

• Not intended for Heavy Duty wheelchairs.
• May not work with all chair configurations.
• Extension finish will be blasted satin.

Squared off titanium footrest CMD #71 Clinical rationale
Modification indicated to allow for added surface area across width of the footrest tube offering additional lower extremity positioning and foot placement options while maintaining optimal taper.
Available on:
Tillite TR, Tillite TRA, Tillite ZR, Tillite ZRA, Tillite Aero Z, Tillite Aero T
Notes:

• May not work with all chair configurations.
• If retrofitting an existing wheelchair, a SN will be needed to ensure proper design.
• If retrofitting an existing wheelchair, the desired footrest will be needed for verification of design.

Adapted footrest height adjustment CMD #72 Clinical rationale
Modification indicated for individuals with lower extremity measurements that require a specific seat to footrest measurement not available on the standard order form.
Available on:
Tillites TR, Tillite TRA, Tillite TX1, Tillite ZR, Tillite ZRA, Tillite Aero T, Tillite Aero Z
Notes:

• Available on Tift Model Wheelchairs only.
• May not work with all chair configurations.

Required information
(Insert required information for CMD-E to complete this request)

Seat to footrest:………
Front Seat Height:…………………
(Difference of A and B must be 2” or more)
Front roller CMD #80 Clinical rationale
Modification indicated when footplate to floor height is lower than 2”. This roller contacts elevated surfaces (such as thresholds) first, allowing the chair to continue forward movement as contact occurs.
Available on:
Tillite TR, Tillite TRA, Tillite ZR, Tillite ZRA, Tillites Aero T, Tillite Aero Z
Notes:

• Only available on rigid frames.
• Titanium or Angle-adjustable footrest is required.
• Signed CAD will be required.
• There must be 3.25” of difference between the Seat-toFootrest and the Front-Seat-Height Dimensions.
• May not work with all chair configurations.
• Not available with flip-back footrest.
• Not available with clamped-on, high-mounted footrests.

Titanium painted footrest CMD #83 Clinical rationale
Modification indicated for individuals who require/request a footrest that complements and matches the color of the wheelchair frame.
Available on:
All chairs that receive a titanium Open Loop or Flat ABS footrest option
Notes:

• Cannot be a double coat on ZR/ZRA.
• May not work in every configuration.

V-front in 1/2” increments CMD #84 Clinical rationale
Modification indicated for both lower leg positioning benefits as well as to reduce overall width between casters for improved accessibility in tight spaces.
Available on:
Tift rigid chairs
Notes:

• May not work with all chair configurations.

Required information
(Insert required information for CMD-E to complete this request)
Footrest width desired: ………
Tillite manual wheelchairs
Creative Mobility Division
NOTE: Per Mobil’s warranty does not cover Creative Mobility Division frames and frame components, unless Premorbid determines that the frame or frame component was defectively manufactured.

2701 West Court St, Pasco, WA 99301
Phone +1 509 586 6117 | 800 545 2266

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>