Smart-AVI KLX-500 V2 DVI KVM Extender Via LAN User Guide

KLX-500 V2
DVI KVM Extender via LAN
BREAK DISTANCE BARRIERS
TO EXTEND DVI AND
KVM SIGNALS OVER IP
USING CAT5/5E/6 CABLES
Quick Start Guide

OVEVIEW

The KLX-500 V2 Extender provides 500 ft of connectivity using CAT5/5e/6 cables used in LAN infrastructure to extend KVM (Keyboard, Video and Mouse) operation of DVI input. Chain additional extenders to extend signals even further and transmit crystal clear audio-video signals in real-time.
The KLX-500 V2 is an ideal fit in preexisting LAN infrastructures, like corporate office environments and data centers. The KLX-500 V2 supports full USB emulation and 1080p HD video up to 1920 x 1080 resolution at 60 Hz. The KLX-500 V2 allows for remote KVM support, so managing workflow is never more than a mouseclick away.
Built with plug-andplay functionality, setting up and running KLX-500 V2 is simple and seamless; no drivers or software installations required.
The KLX-500 V2 compresses data to utilize CAT5/5e/6 cables at no loss to performance or picture quality. For thebest visual and control results when going the distance, KLX-500 V2 has your KVM and HD video needs covered.

FEATURES

• Extends KVM operation by 500 feet via LAN (CAT5/5e/6 cables)
• Supports DVI input
• Supports full USB emulation for keyboard-videomouse operation
• Audio input and output
• Supports 1080p up to 1920 x 1080 resolution at 60 Hz
• Plug-and-Play ready
• No software or driver required

HARDWARE INSTALLATION

1. Power off all devices prior to connecting them.

2. Connect the KLX-500-V2-TX transmitter to the computer with a USB Type A to Type B cable.

3. Connect the computers DVI output to the KLX-500-V2-TX DVI input.

4. Optionally connect the computers audio and microphone jacks to the KLX-500-V2-TX.

5. If you want local access you may optionally connect a DVI monitor to the DVI output on the KLX-500-V2-TX and a USB
   keyboard and mouse to the KLX-500-V2-TX USB ports marked for keyboard and mouse.

6. Connect a CAT 5/5e/6 cable to the KLX-500-V2-TX.

7. Connect a CAT 5/5e/6 cable to the KLX-500-V2-RX.

8. Connect a DVI monitor to the DVI output on the KLX-500-V2-RX.

9. Connect a USB keyboard and mouse to the KLX-500-V2-RX USB ports marked for keyboard and mouse.

10. Optionally connect speakers and a microphone to the KLX-500-V2-RX.

11. Power on all devices.

12. Press and release the SW button on the KLX-500-V2-RX to learn EDID from the connected monitor. The Link LED will go out and come back on flashing once the EDID is learned.

TECHNICAL SPECIFICATION

VIDEO

1080p/60Hz/48bit
TV Resolution| 480i
Input Interface (TX)| (1)DVI-I,
(2)USB Type A (female), (1) USB Type B
Output Interface (RX)| (1)DVI-I,
(2)USB Type A (female)
Input Cable Length| Up to 40 ft
Output Cable Length| Up to 40 ft

AUDIO

SYSTEM

OTHER

WHAT’S IN THE BOX

NOTICE

The information contained in this document is subject to change without notice. SmartAVI makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for particular purpose. SmartAVI will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material.
No part of this document may be photocopied, reproduced, or translated into another language without prior written consent from SmartAVI Technologies, Inc.

DESIGNED AND MADE IN THE USA
(888)-994-7427, (702)-800-0005
2455 W Cheyenne Ave, Suite 112
North Las Vegas, NV 89032
SmartAVI.com

Documents / Resources

| Smart-AVI KLX-500 V2 DVI KVM Extender Via LAN [pdf] User Guide
KLX-500-V2-TX, KLX-500-V2-RX, KLX-500 V2, KLX-500 V2 DVI KVM Extender Via LAN, DVI KVM Extender Via LAN, KVM Extender Via LAN, Extender Via LAN, Via LAN, LAN
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>