Smart-AVI DVS2P 2-Port DVI Splitter User Manual
- June 9, 2024
- Smart-AVI
Table of Contents
Smart-AVI DVS2P 2-Port DVI Splitter User Manual
1-888-994-7427
www.smartavi.com
Technical Specifications
What’s in the box?
OVERVIEW
The DVS2P is a 2-port DVI splitter, which can send one DVI video source signal
to two connected DVI monitors for identical displays.
The DVS2P is plug-and-play, meaning it is ready for immediate use upon
connection to input-output devices and a power supply. Simply connect the
splitter to a DVI source and two monitors, then power on the unit: your DVI
video will display on both monitors in stunning Full HD (1920×1200 @ 60Hz).
The DVS2P excels at creating dual-screen displays in a variety of settings and
applications. Set up a DVS2P at bench testing facilities, data servers for
better visualization of information, help desks for unified displays, and
more!
FEATURES
- Send a single DVI video source signal to two connected DVI monitors or flat-panel displays
- Uses PanelLink digital technology
- Supports high-resolutions up to WUXGA (1920×1200 @ 60Hz, 25-165MHz)
- Can be daisy-chained and cascaded
- Compliant with DVI 1.0 sources and monitors
- Simultaneous DVI monitor display
- Plug-and-play; no additional software required
- Compatible with mounting brackets and rack-mounting kits
INSTALLATION
- Turn off the power of all devices (computer, monitors and splitter).
- Connect the video source’s DVI output port to the splitter DVI input port using standard DVI cable.
- Connect the video source’s DVI output port to the splitter DVI output port.
- Plug the power supply into the DVI splitter.
- lug the power supply into the wall outlet or power bar. Check to see if the power LED light is active on the front of the DVI splitter.
- Turn on the displays.
- Turn on the video source.
OPERATION FOR CASCADE
If you need to add more monitors, you need to attach an addition splitter box.
Connect a DVI male/male extension cable between a Video Out port or the
primary splitter (the splitter connected to the computer) and the Video In
port on the cascaded splitter.
NOTE: Even though you can cascade the splitter, the image might become unstable if you cascade too many tiers of splitters.
Troubleshooting
No Power
- Make sure that the power adapter is securely connected to the power connector of the unit.
- Check the output voltage of the power supply and make sure that the voltage value is around 5VDC.
- Replace the power supply
No Video
- Check if all the video cables are connected properly.
- Connect the computer directly to the monitor to verify that your monitor and computer are functioning properly.
- Try replacing the video cable.
- Restart the computers.
Technical support
For product inquiries, warranty questions, or technical questions, please contact [email protected].
Limited warranty statement
A. Extent of limited warranty
SmartAVI, Inc. warrants to the end-user customers that the SmartAVI product specified above will be free from defects in materials and workmanship for the duration of 1 year, which duration begins on the date of purchase by the customer. Customer is responsible for maintaining proof of date of purchase.
SmartAVI limited warranty covers only those defects which arise as a result of normal use of the product, and do not apply to any:
a. Improper or inadequate maintenance or modifications
b. Operations outside product specifications
c. Mechanical abuse and exposure to severe conditions
If SmartAVI receives, during applicable warranty period, a notice of defect, SmartAVI will at its discretion replace or repair defective product. If SmartAVI is unable to replace or repair defective product covered by the SmartAVI warranty within reasonable period of time, SmartAVI shall refund the cost of the product.
SmartAVI shall have no obligation to repair, replace or refund unit until customer returns defective product to SmartAVI.
Any replacement product could be new or like new, provided that it has functionality at least equal to that of the product being replaced.
SmartAVI limited warranty is valid in any country where the covered product is distributed by SmartAVI.
B. Limitations of warranty
To the extent allowed by local law, neither SmartAVI nor its third party suppliers make any other warranty or condition of any kind whether expressed or implied with respect to the SmartAVI product, and specifically disclaim implied warranties or conditions of merchantability, satisfactory quality, and fitness for a particular purpose.
C. Limitations of liability
To the extent allowed by local law the remedies provided in this warranty statement are the customers sole and exclusive remedies.
To the extent allowed by local law, except for the obligations specifically set forth in this warranty statement, in no event will SmartAVI or its third party suppliers be liable for direct, indirect, special, incidental, or consequential damages whether based on contract, tort or any other legal theory and whether advised of the possibility of such damages.
D. Local law
To the extent that this warranty statement is inconsistent with local law, this warranty statement shall be considered modified to be consistent with such law.
NOTICE
The information contained in this document is subject to change without notice. SmartAVI makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for particular purpose. SmartAVI will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material. No part of this document may be photocopied, reproduced, or translated into another language without prior written consent from SmartAVI, Inc.
20180109
Tel: (888)-994-7427 • (702)-800-0005
2455 W Cheyenne Ave, Suite 112
North Las Vegas, NV 89032
2-Port DVI Splitter