zelmer ZIR3285 Steam Iron User Manual
- June 14, 2024
- zelmer
Table of Contents
zelmer ZIR3285 Steam Iron
Product Information
Specifications
- Model: ZIR3285 Select
- Power : 96W
- Temperature control : Yes
- Water tank capacity : Not specified
- Steam function : Yes
- Spray function : Yes
- Auto shut-off : Yes
- Cleaning system : Yes
Product Usage Instructions
Safety Instructions
- The iron should not be left unattended when connected to power.
- Remove the plug from the socket before filling the water tank.
- The iron must be used and stored on a stable and flat surface.
- The iron should not be used if it has been dropped, leaks, or shows visible signs of damage.
Filling the Water Tank
- Disconnect the iron from power before filling the water tank.
- Slowly pour water through the inlet, making sure not to exceed the indicated water level.
Spray Function
If there is enough water in the tank, the spray button can be used at any
temperature setting during steam or dry ironing. Press the spray button
multiple times to activate the pump during ironing.
Steam Ironing
- Set the temperature control knob to the appropriate temperature indicated in the ironing instructions or fabric label.
- The indicator light will stay on until the selected temperature is reached, then it will turn off.
- Set the steam control to the desired position.
- Caution : Avoid contact with the steam vents.
Dry Ironing
Set the temperature control knob to the minimum position.
Vertical Ironing
Hold the iron in a vertical position and press it gently against the fabric
to remove wrinkles.
After Ironing
- Set the temperature control knob to the minimum position.
- Disconnect the plug from the power socket.
- Place the iron on its base.
FAQ
Q: How do I clean the soleplate
A: Wipe the soleplate with a soft damp cloth and dry it.
Q: Does the iron have an anti-scale system
A: Yes, the iron has an anti-scale system to prevent scale build-up.
Q: Does the iron have an auto shut-off feature
A: Yes, the iron has an auto shut-off feature for safety.
Steam iron
WE WOULD LIKE TO THANK YOU FOR CHOOSING ZELMER. WE WISH THE PRODUCT PERFORMS
TO YOUR SATISFACTION AND PLEASURE.
WARNING
Please read the instructions for use carefully prior to using the product.
Store these in a safe place for future reference.
DESCRIPTION
- Spray button
- Shot of steam button
- Steam regulator
- cover of felling opening
- Output water spray
- Self-cleaning button
- Temperature Control
- Temperature indicator light
- level mark maximum filling
- Power cord
- Soleplate
SAFETY INSTRUCTIONS
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. If the supply cord is damaged it must be replaced by persons in order to avoid a hazard. The iron must not be left unattended while it is connected to the supply mains. The plug must be removed from the socket-outlet The iron must be used and rested on a flat, stable surface When placing the iron on its stand, ensure that the surface on which the stand is placed is stable. The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking. Keep the iron and its cord out of reach of children less than 8 years of age when it is energized or cooling down. Instruction for the safe refilling of the water reservoir are given in filling the water tank section .CAUTION Hot surfaces. Surfaces are liable to get hot during use.
IMPORTANT WARNINGS
This appliance is designed for home use and should never be used for
commercial or industrial use under any circumstances. Any incorrect use or
improper handling of the product shall render the warranty null and void.
Prior to plugging in the product, check that your mains voltage is the same as
the one indicated on the product label. If you use one adaptor, make sure it
can reach 16 A and is provided with earth socket The mains connection cable
must not be tangled or wrapped around the product during use. Do not use the
device, or connect and disconnect to t supply mains with the hands and / or
feet wet. Do not pull on the connection cord in order to unplug it or use it
as a handle Do not direct steam at people and animals.
Unplug the product immediately from the mains in the event of any breakdown or
damage and contact an official technical support service. In order to prevent
any risk of danger, do not open the device. Only qualified technical personnel
from the brand´s Official technical support service may carry out repairs or
procedures on the device. Only an official technical support service center
may carry out repairs on this product. Proceed according to maintenance and
cleaning section of this manual for cleaning B&B TRENDS SL. disclaims all
liability for damages that may occur to people, animals or objects, for the
non-observance of these warnings.
Before the first use
Before using the steam iron, please ensure you read the user manual and understand all parts and features of the steam iron. Be sure to remove any packaging material and labels before using for the first time. In the first use they can break off odors or fumes that sent quickly. Do not spray for the first time on clothes and there may be traces of dirt on the soleplate.
HOW TO USE
Heating
Always check whether a label with ironing instructions is attached to an
article to be ironed. Follow these instructions in all cases. Turn the
temperature control dial round to set the appropriate temperature indicated in
ironing instructions or in fabric label.
| Marking | Material, for example |
|---|
. (1 dot)
|
Acetate, elastane, polyamide, polypropylene
. . (2 dots)
|
Cupro, polyester, silk, triacetate, viscose, wool
… (3 dots) / MAX| Cotton, linen
-
Insert the main plug into the wall socket. The indicator light will turn on. Once the selected temperature is reached, the indicator light will turn off, indicating you may start ironing.
-
Water tank filling
Unplug the iron before filling the water tank.
The device is designed for use with tap water. If the water in your area is hard or semi-hard use mix tap water with distilled or demineralized water purchased in stores, in the ratio 2:1 and 1:1 respectively (distilled water: tap water). Check with your water supplier to determine the type of water in your area. Never use 100% distilled or demineralized, rainwater, softened water, scented water, water from other appliances such as refrigerators, air conditioners, dryers or other types of home water preparation water. Open the cover for filling. -
Slowly pour water through the water inlet.
Do not fill higher than mark on the water tank, in order to avoid spilling out of water.
The water tank should be emptied after each use. -
Spraying
As long as there is enough water in the water tank, you may use the spray button at any temperature setting during steam or dry ironing.
Press the spray button several times to activate the pump while you are ironing. -
Steam ironing
Set the temperature control dial to the desired position in accordance with the manufacturer’s label. The indicator light will turn on until the temperature is reached. Then the indicator light will turn off.
Set the variable steam control to the desired position.
CAUTION : Avoid coming in contact with ejected steam. -
Dry ironing
The steam iron can be used on the dry setting with or without water in the water tank, it is best to avoid having the water tank full while dry ironing.
Turn the variable steam control to the minimum position.
Select the setting on the temperature control dial best suited for the fabric to be ironed.
CAUTION: If the steam iron has been used for a long time, it is hot and there is no water. Do not refill it with water until the steam iron cools down\ -
Shot of steam The shot of steam feature provides additional steam for removing stubborn wrinkles. Set the temperature control to at least the “●●” position. Press the powerful steam button to release the burst of steam. NOTE: To prevent water leakage from the soleplate, do not keep the powerful steam button in continuously and wait almost 5 seconds between pressures.
-
Vertical ironing Set the temperature control to “max”. By pressing the shot-steam button at intervals you can also iron vertically (curtains, hung garments, etc.) NOTE : To prevent water leakage from the soleplate, do not keep the powerful steam button in continuously and wait almost 5 seconds between pressures. When you finished ironing Set the temperature dial to the minimum position. Remove the main plug from the wall socket. Stand the iron on heel rest.
-
MANITENANCE AND CLEANING It is recommended to do the self-cleaning every two weeks if the water in the area is hard or semi-hard if frequent use of the device is made Before cleaning the steam iron ensure it is unplugged from the power supply and has completely cooled down. Do not use abrasive cleaners. To clean exterior surfaces, use a damp soft cloth and wipe dry. Do not use any chemical solvents, as these will damage the surface. Cleaning the soleplate; Do not use scouring pads or harsh cleaners on the soleplate as these will damage the surface. To remove burnt residue, iron over a damp cloth while iron is still hot. To clean the soleplate, simply wipe with soft damp cloth and wipe dry.
Self-cleaning
- Unplug the iron from the mains socket
- Set the steam regulator to the
- Fill the water reservoir
- Set the temperature control to its maximum position.
- Insert the main plug into the wall socket.
- Allow the iron to heat up until the indicator light turns off.
- Unplug the steam iron (very important!)
- Hold the iron over a sink. Press the “clean” button and shake the iron until approximately one third of the water capacity of the tank is evaporated. Boiling water and steam will be ejected from the holes in soleplate with impurities washed out
- Release the “clean” button, and gently shake the iron for some seconds.
- Repeat the steps 8 and 9 three times until the tank is empty.
- Then plug the iron in and heat it up again until the remaining water has evaporated.
- Push the “clean” button a few times more to clean the valve.
- Unplug the iron and let the soleplate cool down.
- Move the iron over an old (preferably) piece of cloth. This ensures that the soleplate will be dry during storage.
It is recommended to do the self-cleaning at least every two weeks. Please
note Do not use chemical additives, scented substances or decalcifies.
Failure to comply with the above-mentioned regulations leads to the loss of
guarantee.
Anti-calc system
A special resin filter inside the water reservoir softens the water and
prevents scale build-up in the plate. The resin filter is permanent and does
not need replacing. The “anti-calc” cartridge has been designed to reduce the
build-up of scale produced during steam ironing, helping to extend the useful
life of your iron. Nevertheless, the “anti-calc” cartridge cannot remove all
of the scale that is produced naturally over time. Please note : Do not
use chemical additives, scented substances or decalcifies. Failure to comply
with the above-mentioned regulation leads to the loss of guarantee.
Auto shut-off
This steam iron is fitted with an automatic switch-off system. This stops the
iron from heating up, if the iron is resisting on its sole and is not moved
for about 30 seconds, there will be a warning beep and the control lamp for
the automatic switch-off temperature / automatic switch-off control lamp
flashes. The iron will stop heating up. To deactivate the automatic switch-
off, lift up the iron and move it gently from side to side. The control lamps
for the automatic switch-off temperature / automatic switch-off control lamp
goes out and the iron will head up again. If the iron is resisting on its base
and is not moved for about 8 minutes, there will be a warning beep and the
control lamp for the automatic switch-off lamps will flash. The iron will stop
heating up. To deactivate the automatic switch-off, lift up the iron and move
it gently from side to side. The control lamps for the automatic switch-off
goes out and the iron will heat up again.
Troubleshooting
| Problem | Possible cause | Solution |
|---|
Soleplate is not heating even though iron is turned on.
| ****
Connection problem
| Check main power supply cable plug and outlet.
Temperature control is in “min” position| ****
Select adequate temperature
Iron does not produce steam
| ****
Not enough water in tank
| ****
Fill water tank
Steam control is selected in non- steam position.
| Set steam control between positions of minimum steam and maximum steam.
Selected temperature is lower than that specified to use with steam.| ****
Select a higher temperature
Spray function does not work| ****
Not enough water in tank
| ****
Fill water tank
Steam jet and vertical steam jet function does not work
| ****
Steam jet function was used very frequently within a short period.
| ****
Put iron on horizontal position and wait before using steam jet function.
Iron is not hot enough
| Adjust to higher temperature to steam ironing. Put iron in vertical position and wait temperature indicator light becomes fixed.
The iron is leaking
| ****
The temperature setting is too low to produce steam.
| ****
The variable steam knob must be set on position until the iron is hot.
No proper closing of “calc’nClean” system.| ****
Actuate a few times the “clean” button
White streaks come through the holes in the soleplate
| ****
The soleplate has a build-up of scale because it has not been self- cleaned regularly.
| ****
Do the self-cleaning process. Remember to do it at least every two weeks.
PRODUCT DISPOSAL This product complies with European Directive 2012/19/EU on electrical and electronic devices, known as WEEE (Waste Electrical and Electronic Equipment), provides the legal framework applicable in the European Union for the disposal and reuse of waste electronic and electrical devices. Do not dispose of this product in the bin, instead going to the electrical and electronic waste collection centre closest to your home.We hope that you will be satisfied with this product.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>