Xnano X3 Native 720p Portable Home Projector User Manual

Xnano X3 Native 720p Portable Home Projector

Safety Instructions

WARNING:

1. To reduce the risk of fire or electric shock, do not expose this device to rain or moisture. The device shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.
2. The plug of power cordset is used as disconnect device, the disconnect device shall remain readily operable.
3. To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.
4. The plug of power cordset is used as the power interrupting device. Please pay attention to safety plug and pull and convenient operation.
5. Do not expose the appliance to naked flame sources (for example, lighted candles).
6. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer or service operator where the product was purchased. They can take this product for environmental safe recycling.

FCC Warining Statement

FCC Radiation Exposure Statement:

The antennas used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co- located for operating in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference. and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

Hazardous Substances Table

• It indicates that content of toxic and hazardous substance in all homogeneous material are less than specified limit by Directive2011/65/EU (RoHS)
• It indicates that at least one content of toxic and hazardous substance in all homogeneous material is beyond specified limit by Directive2011/65/EU (RoHS)
• This table shows the toxic and hazardous substance when manufacture this device, hazardous substance information is based on information from supplier as well as internal inspection.
• In some part, hazardous substance cannot be replaced with current technologies, Tfiretek is always doing its best to improve the quality of the product.

Important Safety Notes

To enwre the performance and stability of the projector, please place it horizontally and leave a space of about 30cm between the projector and the wall.

Specifications

Item Specification

• Product Name Projector X3
• CPU Amlogic T972-B
• GPU ARM Mali-G31 MP2 GPU
• DDR DDR3 2GB
• Flash eMMC 16GB
• OS Android 9.0 OS, OTA Upgrade Support
• Wi-Fi Standard IEEE802.11b/g/n and 802.11a/ac
• Bluetooth Bluetooth 5.0
• HD Interface HD IN
• USB Interface USB2.0 Port
• EARPHONE Interface 3.5MM EARPHONE
• LAN  LAN IN
• Type-C TP IN

Package contents

Projector Introduction

Bluetooth Remote

Paring method( Bluetooth mode connection)

1. Select [Settings]> [Bluetooth & Remotes] > [Add accessory]
2. Press and hold tho loft & right dircct buttons at the time time for 3-5 seconds until the red light flashes.
3. Select tho name [Bluetooth remote] of the list to connect.
4. After pairing, you can now use the voice button to search for what you want.

Projection Size/Distance Reference

The projection screen size [or size of images) is determined by the distance between the lens of the projector and the projection surface.

• The projection image size is to upto 130″,
• The projection distance is 4.1 ft- 13ft

Power-On/Off Operation

1. Power connection
   Connect the included power adapter to the AC Port on the projector, and then to the wall 01.rtlet

2. Power On&Power Off

Screen Adjustment

Adjust the size and position of the picture by adjusting the projection angle (height of the image}, tilting the image left and right, adjusting the focus, zoom out/zoom in the image size, adjusting the keystone correction.

1. Adjust the height screw
2. Raise the front or the projector.
3. Screw on the heightening screw to adjust the picture to the height you want
4. Auto Focus
   After the first startup, the focus wlll the automatically completed . Long press F–/F- button or remote control to control the lens for fine tuning.

Screen Adjustment

Projection Methods

Depending on the installation method, select the appropriate option in the settings.

Auto & Manual Keystone Correction

Automatic Keystone Correction is off by default.

How to make it work:
Settings > Auto Focus/Keystone> Enable aulomalic Keystone Correction.
Manual Keystone Correction:
Go to Settings and then adjust it according to the projected image.

Eletronic Zoom

No more space constraints, no need to change the projector distance, just move the projector to tilt the screen size, you can customize your projection screen size from 35% to 100%.

Brigh1ness Adjustment

When playing a video, you can set the picture mode.

1. Set picture mode
   Press [Settings] button on the remote, open [picture], click [picture model. select the picture mode you want.

2. Custom picture mode:
   select [setting]> [Picture] > [Custom settings], adjust the parameters as needed. Remember to take pictures and record theoriglnal values before modifying parameters.

System Initial Setup

1. Language Select
   Select [Settings], open [Device Preferencss], click
   [Language], choose your preferred language.

2. Date &time
   Select [Sallings], open [Device Prererenooo], click [Dale & time], then you can accoos to [Sat time zone] and Use [24 hour format].

3. Network

4. Select [Settings], click [Network & Wi-Fl] to access to the WI-Fl oottlngs page.

5. Choose tha Wi-Fi option and enter passwords to connect

6. FOTA Update on line
   Select [Apps], open [FOTA update], click [Check Version], follow the on-screen instructions to upgrade the software version.

Bluetooth connection

A. Projector Mode
Connect projector to a Bluetooth speaker, Bluetooth headphone, Bluetooth remote. etc.

1. Turn on your device’s Bluetooth.
2. Select [Settings]> [Bluetooth & Remotes]> [Add accessory], tum on your device”s Bluetooth and choose the name of your device to oomplete the Bluetooth connection.

B. Bluetooth Speaker Mode
Use the projector’s speakers to output audio from a compatible device connected by Bluetooth, such as Smartphone, Laptop,

1. Open [Apps], open [BluetoothSpeaker] to switch to Bluetooth speaker mode.
2. Enable Bluetooth on your smartphone and select [ZH.X3] as the device to be added.
3. Play the music you want.
4. Press the [Bcick] button on the remote controller to exit this mode.

Apps
Once connected to a wireless network, you can access online services, enjoy movies, music and pictures, and browse internet. Apart from the apps installed, you can also install any other apps either from the App Store or by a USB flash drive. Installed Apps, like Netflix, TikTok, YouTube, Chrome, Prime
When open Netfix at the first time, there is notice pop up reminding customer to update, please click “CANCEL”, do NOT update. (Installed Netflix is very stable, so updating is not recommended)

App Manager

1. Press [Home] button > select [Settings] >[Apps] > and press [OK].
2. Select an app and check the current version, open or force stop, check the storege used or clear data, or cleer cache, or clear default, or uninstall it.

Select the Input Source

1. Connect to HD/ AV Playback Devices
   This device supports connections with various HD/AV plnybcick devices such as strooming media player, TV stick, TV box, DVD player, set-top box{STG), game machine or other devices (HD cable provided).

2. Connect this device to an HD/AV playback device with an HD/AV cable.

3. Press [Input Source] key or Select [SignalSource] to access the menu, than select the source channel you naed.
   Press [Menu] on the remote controller, you can set parameters of the picture for Signal Source. can be set to stay on the previous Input source after you reboot this device.

4. Connect to USB Storage Device
   With this device, you can enjoy music, video, and picture, or instcill cipps that are stored on  USB stornge device.

5. Press [Home] button to access the home menu.

6. Select lile Manager app and press [OK] .

7. Select a file, then press [OK]

Screen Mirroring

You can wireless cast the screen of your smanphone or tablet onto the projection surface.

1. For IOS Devices:

2. Ensure the iOS device and projector connected to the same network.

3. Select and open [iOS Cast] on the home page.

4. pen tne screen MltTortng “from the control center on IOS Devices.

5. Search for available dovicos.

6. Coonoct to rl:lytctly-xxxxxxl option to start mirroring scrcon.

7. For Android Devices:

8. Select end open [Mirecast] on the home page.

9. Open the Wireless Cast on Miracast-compatible device to search devices, select the [ZH_X3] option to connect.

10. Accept the connection invitation from the device. If the screen is synchronized, screen completed.

11. For Windows Laptop(Win 8.V”Kl/11)

12. Select [Cast] on home page> open [Mirl’G<lst]

13. Press the Windows key and P key on your keyboard at the same time> [Project] > Select Connect to a wireless display.
    If the Connect to a wireless display option is not listed, this means your device or video card does not support Mlracast.

14. A scan for wireless display devices will start. Select your desired wireless display device nemed [ZH.X3].

15. Once connected, your Windows 10 device should now ba mirrored by the wireless display.
    Certain wntent may be unavailable to be casted due to copyright restrictions. In this case, you can stream those content via the same app installed in your projector.

Maintenance Suggestion

To make this projector work longer, we recommend you to follow the ideas.

1. Before cleaning the projector, turn off the projector, then turn off the main power and unplug it from the outlet.
2. Cloan tno filter regularly mooth to prevent clogging.
3. Make sure to close the projector off once you finished using it.
4. Make sure not to use ii continuously for more than 6 hours.

Troubleshooting

1. Unable to bootup
   Check if the power cord is connected properly, and if the power light is on. Try to unplug and plug the power if the projector still cannot boot up.

2. Remote controller is insensitive or unresponsive

   • Do not cover IR receiver.
   • In Infrared mode. make sure remote points at IR receiver directly.
   • There is an obstacle between tha remote control and the projector.
   • The batteries are out of power or the battery is not installed oorrectly.
   • Bluetooth remote control make sure It is working within ten meters.

3. No network connection

   • WiFi is not connected properly, or the WiFi signal is poor.
   • Plcaso connoct hotspot of smart phono to verify tf rcutor Is working properly.

4. Image or audio is unstable

   • The connection cables are not securely connected to the projector or the signal source.
   • The Internet bandwidth ls llmited or over-occupied.
   • The projector is out of effective range of Bluetooth connection.

5. No input source

   • The video source is not turned on or connected correctly.
   • The projector is not correctly connected to the input source device.
   • The video or audio file format is not supported by the projector.

6. Computer can’t display through HD cable

   • HD cable not securely connected.
   • Try to tum off HD2.0.

7. Black screen or abnormal picture after booting for a while

   • Make sure the power plug is working end  fitted into the outlet.
   • Raboot the projector.
   • The vants are blocked(Claaning evary month is recommended). for repair.

8. Blurry display

   • The lens Is not clecin.
   • The projection lens is not correctly focused.
   • The projector and the screen are not aligned properly.
   • The environment is too bright.

9. Screen freeze

   • Please reboot the projector to test again. If the screen still freeze, please turn off for 10 minutes end turn on again. If you Cooling fan is not working properly. If abnormal, please return have any other problems or suggestions, please contact our online services to help you immediately.

Manufacture Information:
Shenzhen TFIRETEK Technology Co., Ltd. 4 Floor, Plant 5, Detai Industrial Zone, No., 496, Huarong Road, Langkou Community, Dalang. Street, LongHua District, Shenzhen City, China
Hereby, Shenzhen TFIRETEK Technology Co., Ltd. declares that the projector X3 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.tfiretek.com/
European Agent Information:
Name: eVatmaster Consulting GmbH
Add: Bettinastr. 30,60325 Frankfurt am Main,Germany
Zip Code: 60325
E-mail:[email protected]
Tel: +496995179070

Warranty Card

1. This projector supports Three Guarantees Service Warranty “for 1 year from the date of  purchase.
2. Within warranty, we support warranty service for any failures caused by product technology.
3. The following situations are not covered by the warranty:
   • Accessories except the projector.
   • Products that have been disassembled and repaired without pemission. damege Caused by external force and other natural disasters.
4. When the product fails, please contact the dealer or supplier in time to arrange for repair with this warranty card.
5. This warranty liability is limited to product failure repairs within the warranty period.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>