Xnano X3 MAX Native 720p Portable Home Projector User Manual

Xnano X3 MAX Native 720p Portable Home Projector

USER MANUAL

For more details, please consult online customer service.

Notice
Please read this user manual carefully before use.

Safety Tips

For the best viewing effect, please use the projector In a dark room.

1. Do not install this projector in an area that is blown by Iha air conditioning, to prevent the projector failure caused by \ll/al0r vapor condensation or excessive temperature.
2. Ensura l1al Lhe environment is vertical la prevent heal caused by heat build-up.
3. Prevent foreign objects from falling into the” ma<1hine. N inS any metal objects into the If foreign objects fall into the machine accidentally, please power off immediately and seek professional] advice.
4. Do not place any liquid 01 the machine to avoid leakage.
5.  Avoid violent vibrations when transporting. Please protect the lens from wear.
6. Do not touch the vents when using the projector ta avoid burns due to excessive temperature.
7. Do not look directly a: the lens Vllhlle the projector ls running.
8. Please clean the filter regularly to prevent malfunction caused by clogging.

Notice
Do not open the one of projectors to prevent electric shock. Please seek professional assistance for mai’118nance matters.
Warn
Do not touch! The inside of the projector contains u1lnsulatod voltage.
Warn
Do not install the projector around flammable objects to prevent fire.

To ensure the performance and stability of the projector, please place it horizontally and leave a space of about 30cm between the projector cmd the wc1II.

• Do not install in places with poor ventilation.
• Do not install in high-temperature or humid places.
• Do not block the vents
• Do not in Tiall in dust or smoky places.

Specifications

Package Contents

Projector Introduction

1. ln remote Sensor

2. Projection Lens

3. Dual Filter

4. .LAN Port

5. IR Remo le Sensor

6. Clmm Aud·o Port

7. USB Port

8. HD Port

9. Type C Port

10. O.DC Port

11. Vent

12. battery

13. Power on

14. Signal Source

15. 0k(Enter)

16. Down

17. Left

18. Right

19. Up

20. Manu

21. Returns

22. Projeclor Foot Pac

23. Projector Mounting I love

24. Nm'” le Tag U’lbel

Battery Introduction

Power Supply Modes

1. rechargeable Battery Power Supply
2. Adapter Power Cord Power Supply

Note;
If the product is not used for a long time, it is recommended to pul Lhe projector separately from Lhe gallery.

Remote Control Introduction

Remote Control (Bluetooth Mode Connection)

1. Select [Settings] > [Bluetooth]
2. Simultaneously press and hold the left and right keys for 5 seconds.
3. Select [Bluetooth_Remote] from the list of Bluetooth devices.
4. Select the pairing to establish the connection.

Note: After connecting the remote control to Bluetooth, you can use the voice search function.

Power- On/off Operation

1. Power Connection

2. Power On&Power Off
   

Electric Focus

Press the focus +/- keys to adjust the clarity of the picture.

System Initial Setup

1. Language Select
   CIiek [Settlngs]>[Devlce Preferences]>[Ulnguoge], then choose the language you want.

2. Date&Time
   CIiek [Settlngs]>[Device Preferences]>[Dete & Tlme], then you can select automatic date & time, or turn off automation and use manual adjustments.

3. Network & Internet
   Click [Sallings]>[Nelwork & lnlemel], then Cho the wifi op lion and enter the password to connect.

4. FOTAUpdate
   Click [FOTA Update], follow the on-screen instructions to upgrade the software version.

5. Bluetooth Connection
   Click [Settings]>[Bluetooth] and search for the corresponding
   A Bluetooth device in the projector, and then click on pair.

Screen Mirroring

You can mirror the screen of your smartphone/tablet/computer onto the projector screen.

1. For iOS Devices:
2. Make sure the iOS device and the projector are connected to the same network.
3. Open the [iOS Cast] option on the projector’s interface.
4. On the iOS device, open the Control Center and enable the screen mirroring function.
5. Search for the corresponding device model. §Connect to the corresponding model. and start screen mirroring.
6. 2 For Android Devices:
7. Connect your mobile device to a wireless Wi-Fi network
8. To open LAndroid Miracast on the projector interface.
9. On your phone, tap [Setting], select [Connection & Sharing], and finally enable the Cast function. Connect to the corresponding device model to enable screen mirroring functionality.
   Note: Due to variations in smartphone models, the setup steps may differ. Please follow the mirroring screen instructions that apply to your specific settings.

Screen Mirroring

For Windows Laptopf PC (Win 8.1/1 0/1 1)

1. Connect your device to a network.
2. To open [Android Mirocnst] on the projector interface.
3. Prass the LWindowsJ key and the LPJ key simultaneously on the keyboard. Then, go to :More Display Settings], select [Multiple Displays] in the scale and layout section, and finally choose to connect to e [Wireless Display] to connect to the corresponding device model to enable screen mirroring functionality.

If the Connect to a wireless display option is not listed, this means your device or video card does not support Miracast.

Certain content may be unavailable to be cast due to copyright restrictions. In this case, you can stream those content via the same app installed in your projector.

Q&A

1. Unable to Boot Up
   • Check if the power cord is connected properly, and if the power light is on. Try to unplug and plug the power if the projector still can not boot up;
   • Check if the battery is low on power.
2. The Remote Controller is Insensitive or Unresponsive
   • Do not cover IR receiver.
   • In the infrared mode, make sure the remote points at IR receiver directly.
   • There is an obstacle between the remote control and the projector.
   • The batteries are out of power or the battery is not installed correctly
   • Pair the Bluetooth remote control and make sure is working within 5 meters.
3. Why is there no display when I connect HD port?
   • Check if the interface is securely connected
   • The devices may be incompatible.
4. Blurry Display
   • The lens is not clean.
   • The projection lens is not correctly focused.
   • The environment is too bright.
5. Screen Freeze
   • Please reboot the projector to test again. If the screen still freeze, please turn off for 10 minutes and tum on again

Maintenance Suggestion

Notice
To make chis  projector work I anger, we recommend you to follow the suggestions.

1. Before cleaning, to prevent electric shock accidents, please disconnect the main power supply of the motor.
2. Clean the filter regularly every month to prevent clogging.
3. Moke sure to close the projector off once you finish using ·1.
4. Make sure not to use it continuously for more than 6 hours.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  This device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>