ENGLAON 15P10 15.6 Inch Full HD IPS LED Portable Monitor User Manual

: June 14, 2024
: ENGLAON

ENGLAON 15P10 15.6 Inch Full HD IPS LED Portable Monitor

SAFETY INSTRUCTIONS

Portable Monitor
USB-C To USB-C Cable
USB-C To USB-A Cable
Mini HDMI To HDMI Cable
Power Adapter
Cover Case
User Guide

PRODUCT OVERVIEW

① Sound/Brightness button+
② Pilot light
③ Mini HDMI
④ USB-C
⑤ Power/Menu button
⑥Sound/Brightness button –
⑦ USB-C
⑧ Speaker

Note: To ensure your best user experience, you can use the devices with full-functioned USB-C ports to be connected with the portable monitor as they can transfer power, audio, video, and data at the same time. Most full- functioned USB- C ports will have a unique lightning bolt symbol next to them. Not all USB-C ports can handle all that. Some can only charge, or only transfer data.

CONNECTING A DEVICE

Computer(Via USB-C)

This portable monitor can be connected to a compatible computer using the supplied USB-C cable.
This must be connected to the USB-C port on the left side of the monitor. The computer will provide power and signal to the monitor which can be used to mirror or extend the computer screen.

When connecting the portable monitor and computer via USB-C, the brightness of the monitor will automatically be set to low when connected to a computer that supports reverse power supply.
It is recommended to use a power adapter with this portable monitor to achieve optimal brightness and extended usage duration.

Computer (Via HDMI & Power Adapter)

Connect the supplied power adapter to the power port on the left side of the monitor and plug the power adapter into an electrical outlet.
Connect the HDMI end of the supplied mini HDMI to HDMI cable to the computer and the other end to the mini HDMI port on the left side of the portable monitor.

The power adapter is always required when the monitor is connected via a mini- HDMI to HDMl cable.

Mobile Phone(Via USB-C)

Connect one end of the supplied USB-C to USB-C cable to the USB-C port on the left side of the monitor, and the other end to the mobile phone.

When connecting the portable monitor and mobile phone via USB-C, the brightness of the monitor will automatically be set to low when connected to a mobile phone that supports reverse power supply.
It is recommended to use a power adapter with this portable monitor to achieve optimal brightness and extended usage duration.

Other Devices(Via HDMI & USB-A to USB-C)

Connect the supplied power adapter to the power port on the left side of the monitor and plug the power adapter into an electrical outlet.
Connect the HDMI end of the supplied mini HDMI to HDMI cable to the device and the other end to the mini HDMI port on the left side of the portable monitor.
Powering the monitor using the device (optional): Connect the USB-C end of the provided USB-C to USB-A cable Jha USB-C port on the left side of the portable monitor. Then, connect the USB-A end to the device. Note: When using this configuration, the power adapter is not required.

The power either from the power adapter or from the USS-A to USB-C cable is always required when the monitor is connected via a mini HDMI to HDMI cable.

OPERATION

UP/+ /Volume Button
Press the UP/+ button to enter the volume setting interface press the UP/+ and UP/- buttons to adjust the volume.
Menu Button
Press the button for 3 seconds to turn on/ off the display_
Press the button to enter the OSD( On-Screen Display) menu.
Press the button to confirm. Press it for a short time to return to the previous page.
Down/-/ Brightness Button
Press the button in the main interface to open the brightness menu and also used as Down/-button.

BRIGH TNESS

Brightness: The adjusting range is from 0 to 100.
Contrast: The adjusting range is from 0 to 100.
Black Level: The adjusting range is from 0 to 100.
Sharpness: The adjusting range is from 0 to 4.

IMAGE

ECO- Can be changed between STANDARD, RTS, FPS, TEXT, MOVIE and GAME.
OCR (Dynamic Contrast)- Can be turned on and off.
ASPECT – Can change the aspect ratio between Wide and 4:3.

COLOR TEMP

COLOUR TEMP – Change between USER, WARM and COOL. In USER the individual RED, GREEN and BLUE values can be adjusted.

OSD SETTING

LANGUAGE – Change the language of the Menus.
OSD TIMER – Adjust the amount of time the menu is shown before the display returns to normal operation.
TRANSPARANCY – Adjust how see through the menus are.

RESET

RESET – Return the portable display to factory settings.
MUTE – Turn the sound On or Off.
Volume – Adjust the volume level between 0 and 100

MISC

TROUBLESHOOTING

PROBLEM

|

SOLUTION

---|---

No video/ picture (led not lit)

|

Make sure the video cable between the monitor and computer is connected properly and securely.
Use other electrical equipment to confirm that the power outlet is working properly.
Make sure the power button is pressed correctly.
Make sure the correct input source is selected through the input source menu.

No video/ power/ picture (led lit)|

Improve brightness and contrast with OSD.
Check whether the indicators on the side are normal.
Check if the video cable connector pins are bent or broken.
Check whether the power adapter is properly connected.
Make sure the correct input source is selected through the input source menu.

Missing pixels/ spots and light leaks on the scree|

Turn off and on again.
Restore the monitor to factory settings.
Use OSD to adjust brightness and contrast.
Pixels that are permanently off are an inherent defect in LCD technology.
Contact us about monitor quality and pixel issues

Display fails when switching|

Make sure that the video cables of the monitor and HDMI output device is properly connected.
Reset the monitor to factory sestinas.

Picture is missing colors|

Make sure the video cable connecting the monitor and the computer is properly connected.
Adjust custom r / g / b values. Colour in the colour menu of OSD.• In the advanced settings OSD, change the input color format to PCRGB or YPbPr.

Screen image is too small|

Check the aspect ratio setting in the monitor settings OSD.
Restore the monitor to factory sestinas.

Sod does not appear on the screen|

Turn off the monitor, disconnect and reconnect the Power cord and turn on the monitor.

No picture, indicator light is blue|

Check the signal source. Make sure the computer or phone is not in sleep mode.
Check that the signal cable is properly inserted.
Reconnect the signal cable if necessary.
Restart your computer or phone.

The picture does not fill the entire screen.|

Since the resolution of the same screen of the mobile phone can be re-scaled (aspect ratio), the display can be displayed in full screen.
Computer equipment can be set to 16: 9 resolution, the display can be full screen display
Play a video source with 16: 9 video sources, and the monitor can display full screen.

TECHNICAL INFORMATION

LCD Panel & Optical	Model No.	LED15P10-(FHD-Non-Touch)
Display Size	15.6inch
Panel Brand	AUO
Panel Type	IPS, Usually black display, Transmission type
Active Area Display (mm)	344.16(H) x 193.59(V)
Physical Unit Size (mm)	350.76±0.3(H)’216.25±0.5(V) (W/PCB)”3.0mm(Max)
Display Mode	1-LED Lighting Bar Type
Curve	Plane
Scanning Frequency	60Hz
Surface Treatment	Fog Level, Hard Coating(3H)
Brightness(Typical)	250cd/m2
Contrast(Typical)	800: 1
Pixel Pitch	0.17925(H) x 0.17925(V)
Gamut	NTSC 45%
Resolution (H x V)	1920·1080
Aspect Ratio	16:9(H:V)
Response Time(Typical}	30(Typ.)(Tr/Td) ms
View Angles LR,UD(CR>10)	85/85/85/85 (Typ.)(CR 10)
Display Colors	262K
Support technology	PWM Dimming	Support
TYPE-C	Support
HDMI2.0	Support
Maximum Refresh Rate	60Hz
Switch	Support
Speaker	Support 8O1W *2
PS4	Support
PSS	Support
Laptop, Tablet,PC Mainframe	Support (Mn HDMI To HDMI) Computers can have

portrait screens
TV Box| Support (Mn HDMI TO HDMI)
Digital Camera| Support(Mini HDMI TO HDMI)
Controls| Front Control| Menu > < EXIT Power
On Screen Display| Reference Universal OSD
Power Mode Indicator Light| Red and green lights
Interface| Input 1| TYPE C-C1 Full-Function
Input 2| TYPE C-C1 Full-Function
Input 3| Mini HDMI To HDMI
Physical| Shell Material| Bottom Shell/Surfaces ell aluminum alloy CNC oxidation
Dimension(WDH}| 35022s8.Smm
Packing Dimension(WDH)| 439_52so.s43_smm
Net Weight| 730g
Gross Weight| 1850g
GAP-Gap Between QC and middle frame| 0.5mm, I Left – Right I S0.5mm
GAP-Gap Between rear shell and backplane| S0. 5mm
GAP-Gap Between front frame and OC| S0. 5mm
Operating Condition| Temperature| 0°C – 50°C
Humidity| 20% – 85%, Non-Condensing
Accessory| Power Cable| USB2.01
Adapter| sv12.0A1
HDMI Cable| HDMI TO MINI HDMI1
TYPE C 3.1 Cable| TYPE C 3.11
Leather Holster| YES.
User Manual| YES.
Packing Box| YES.
Quality Requirements| Reliability| MTBF 30000H
Failure Rates| S1.0

CLEANING AND MAINTENANCE

Before cleaning the monitor, unplug the monitor power cord from the electrical outlet

When cleaning the antistatic screen, slightly moisten a clean, soft cloth with water. If possible, use a dedicated screen-cleaning tissue or solvent for electrostatic coating.
Do not use benzene, thinner, ammonia, abrasives, or compressed air.
If you find white powder when you unpack your monitor, wipe it off with a cloth.
Be careful when operating the monitor, as dark monitors are easier to scratch and leave visible scratches than light monitors.

Recycling facilities are now available for all customers at which you can deposit your old electrical products. Customers will be able to take any old electrical equipment to participating sites run by their local councils. Please remember that this equipment will be further handled during the recycling process, so please be considerate when depositing your equipment. Please contact the local council for details of your local household waste recycling centers.