ganiza GB10 Smoothie Blender User Manual

Countertop Blender
User ManualModel No.: GB10

IMPORTANT SAFETY INSTRUCTIONS

Before using the electrical appliance, the following basic precautions should always be followed including the following:

1. Read the owner’s manual before operating any appliance or equipment
2. To avoid the risk of electric shock, do not immerse the device in water or use it in a humid environment.
3. Hold the plug when inserting or removing the power cable.Never pull the rope.
4. Do not operate the device when the power cable is damaged.
5. Check the available voltage in your home to make sure it matches the voltage mentioned on your appliance before turning it on.
6. If anything goes wrong, do not attempt to repair the equipment.Be sure to take it to an authorized service center.
7. Always place the unit on a dry, flat surface.
8. Do not use any accessories other than those provided or specified by the manufacturer.
9. In lightning weather or if you do not use the machine for a long time, please be sure to unplug the machiné from the power supply.
10. Do not leave unattended during operation, especially when children are present.
11. Al equipment is for family use only.Do not use for commercial purposes.
12. All appliances and equipment are designed for indoor use.Do not use outdoors unless specifically stated in the instructions.
13. Do not let the power cord hang over the edge of the table or work surface, as sharp edges can damage the cable for a period of time.Don’t let it tangle or come into contact with hot surfaces.
14. Host can not be directly washed with water!Please scrub with a damp rag.Do not use detergents or chemical cleaners to clean the machine.
15. Not to run overload or no-load working.
16. The blade is very sharp, pay attention not to hurt your hand when cleaning and disassembling the machine.
17. Blade components and mixing cup should be fully tighten, not leave the sealing ring, otherwise, it will cause leaking or blade component off
18. Do not use the blade components working on the host directly. Also not touch rotating components when working.
19. Do not use the machine before covering the cover.
20. Before inserting the power, ensure not put the finger or any other tool into jug.
21. This product is equipped with a safety overheat protection design, if the product does not work during use, it may be because the overheat protection is activated! At this time, there may be an unpleasant smell,which is normal Please unplug and let thé product cool for 30 minutes before use!
22. Cooking utensils should be cleaned as soon as possible after use. This will prevent the food from sticking hard to the unit and the possibility of bacterial growt
23. Do not touch any electrical appliances or equipment with wet hands.
24. Please unplug the power cord after using the product to avoid long-term power supply.
25. Please avoid children using this product alone! If children must use this product, make sure an adult is nearby to accompany them! Avoid danger!
26. If leakage is found during use, the product itself may be good! Please check whether the cup fits the cutter seat tightly. Or check whether the seal ring inside the cutter seat is missing? Or is the seal properly assembled? If the above check is no problem, it may be a deformation of the seal ring, please replace the excess seal ring we have equipped!
27. Do not use this product to stir hot food or liquids!

[email protected]

KNOWING YOUR COUNTERTOP BLENDER

PARTS LIST

A.7Host machine
B.1700ml mixing cup
C.1500m tall cup
D. 1500ml cup with handle
E.1300ml grinding cup
F.1 6 Blade mixing knife holder (with sealing ring)
G.1Grinding knife holder (with sealing ring)| H.1 Portable lid
1.2 Round hollow lid
3.2 Solid lid
K. 2 Cutter seat sealing ring
L.1 User manual
---|---

COMPONENT DESCRIPTION

1| | 300m1 grinding cup| Grinding cup, mainly used with grinding knife holder! Ground coffee beans, spices, beans, etc. Grinding cup mainly plays the role of container!
---|---|---|---
2| | 500m1 tall cup| It is mainly used as a container! Use with 6-sided mixing tool holder. It can be used to make juice, milkshake, smoothie, protein drink, fruit and vegetable juice and other drinks.
3| | 500mI cup with handle| It is mainly used as a container! Use with 6-sided mixing tool holder. It can be used to make juice, milkshake, smoothie, protein drink, fruit and vegetable juice and other drinks.
4| | 700m1 mixing cup| It is mainly used as a container! Use with 6-sided mixing tool holder. It can be used to make juice, milkshake, smoothie, protein drink, fruit and vegetable juice and other drinks.
S| | host machine| The main parts of the product, its internal contains the motor and other components, is the power source of the product, to provide power.
6| | grinding knife holder| Use with a grinding cup. Its professionally designed blades can grind hard food into a powder in around 15s!
7| | 6 blade mixing knife holder| Use with tall cups, cup with handle, and mixing cups! Its professionally designed 6-leaf blade makes it easy to make juices and milkshakes!
8| | cutter seat sealing ring| Mainly plays the role of sealing! The detachable design solves the pain point that the knife holder is easy to hide food debris, resulting in the growth of bacteria!
9| | solid lid| It mainly prevents dirt from entering the cup and affects the food in the cup! It can also be used to store some fresh fruit or reasonable storage of prepared juice.Of course, if you want to take the drink out, the lid can also act as a seal.
10| | round hollow lid| It is mainly covered when you want to drink after stirring, which is not only beautiful, but also can improve the user experience!
11| | portable lid| Consider multiple scenarios for users! If users want to take the finished drink outdoors, etc., they can assemble this lid for easy portability and instant drinking!

PRODUCT PARAMETER

Product name| Product model| Rated voltage| Rated frequency
---|---|---|---
Countertop Blender| GB10| T0-120v| 50-60Hz

PRODUCT CHARACTERISTICS

1. high power pure copper motor, better performance and life
2. Press the cup to start, easy to operate
3. motor overheating protection device, safe and reliable
4. detachable parts, easy to clean
5. micro switch design, safe and practical
6. Equipped with multiple cups, can continuously stir multiple cups, to meet the needs of the family!
7. Can meet the grinding function and mixing function!
8. Professional 6 blade, powerful mixing function!
9. The design of the foot mat with suction cup perfectly increases the stability of the product.
10. Professional air duct design, accelerate heat dissipation.

USING YOUR COUNTERTOP BLENDER

GETTING STARTED

1. Remove all the packaging materials from the countertop blender.
2. Take out the countertop blender and clean all the accessories except the main machine with warm or soapy water .
3. Please wipe the host part with a wet rag! Do not rinse with water!(note: the main machine with power cord cannot be rinsed with water).
4. After all accessories have dried naturally, store all accessories and the main unit on adry and stable kitchen countertop or kitchen locker (note: keep out of reach of children or pets).

Note:

1. This product must be placed in a dry and stable place that is not easy to knock, soas to avoid breakage.
   For normal Use, there must be air circulation around the product. Keep this product away from children or pets. Please keep the environment clean to prevent cockroaches and other reptiles from entering the cavity.

2. Please maintain it regularly. Please avoid food residue residue on the product.

3. Please do not place the product in a place with high temperature and humidity, such as a gas stove, a live area or beside a sink, etc.

4. All accessories of this product must be laid flat.
   (Note: Prevent the main engine and its accessories from falling and breaking)

5. This product is equipped with blade. Please keep it in a safe place to avoid falling or scratching.
   (Note: The blade is sharp. Keep it away from children to prevent injury,)

PRODUCT USAGE GUIDE

1. Before using this product for the first time, please thoroughly clean several accessories that come into contact with food.
2. Installation and use:
3. Load the ingredients into the cup.
4. Twist on the cross, or flat blade until the blade and cup have a tight seal
5. Line up the tabs, place the bullet on the power base and press down on the cup to turn it on.

Here’s how it worts: As long as you’re holding it down, the countertop blender is on. When you want the blades to stop, simply let go.
“Lock On “mode: For hands-tree operation, press down and gently turn the cup clock-wise until the tabs lock under the lip of the Power Base. Once you are in Lock On mode, the motor runs con-tinually. To turn it off, simply twist the cup bach counter-clockwise and release the cup

Note:

1. Never put vour hands or utensils near the moving blades and never use your hands or utensils to press the activator buttons down while the Power Base is plugged in.
2. 1f the blade stops in Lock On mode, unplug the countertop blender Immediately. Sometimes, especially when the motor is coming up to speed, a hard ingredient, such as a carrot chunk, can get stuck in the blade and stop it from turning. If the blade stops, unplug the countertop blender Immediately. Take the blade/cupassembly off and give the ingredients a good shake to unblock the blade. If the blade still seems obstructed, twist off the blade and carefully (it’s sharpl spin the blade manually. Once the blade will spin, plug the countertop blender back in and try again-you should be good to go.
3. This product is equipped with a safety overheat protection design, if the product does not work during use, it may be because the overheat protection is activatediPlease unplug and let the product cool for 30 minutes before use! If the product can not be restarted after cooling, it may be that the product has been damaged!
4. To increase the service life of the product. Do not stir for more than 1 minute at a time (1 minute is enough to smooth the food), rest for 30 seconds after 1 minute, and then continue with the second cup. ( During the 30-second wait time, users can prepare ingredients for their next drink. ) After 5 cycles, wait for the product to cool completely before continuing to use! (Expected full cooling time is 15-30 minutes)
5. This product uses a heavy pure copper motor, so the main machine has a certain weight!
6. We use professional suction pad design to ensure the stability of the whole machine. When you want to move the product, you can tilt the product to one side so that its two foot pads are off the table first, and then pick the whole machine up.
7. When we are ready to start the product, please align the card point on the cup with the card slot position of the host machine, press the cup, and then rotate the card point clockwise to enter the card slot.
8. Please note: In order to avoid the product in the working process of the cup from the card slot position counterclockwise off, resulting in the product stop working. We specially designed the structure to prevent falling off. Because of the anti-slip structure design, when you turn the cup clockwise into the card slot, there will be a certain kartun, which is a normal phenomenon.

CHOOSING THE RIGHT BLADE
6 blade mixing knife holder
Chopping-Foods like onions, garlic and carrots, and for making dips such as salsa, bean dip, or gazpacho.
Blending-The Cross Blade pulverizes ice for smoothies, frozen cocktails and milkshakes.
Mixing- Batters for pancakes, muffins and quick breads are mixed
Grating -Foods like hard and soft cheeses and chocolate are grated in just seconds.
Pureeing-Dishes such as hummus, all-natural soups, and baby food are creamy smooth in seconds.
Shaving Ice and Frozen Fruits-For tasty treats such as snow cones or fruit sorbets

Grinding knife holder
Grinding and Chopping items such as:

• coffee beans
• nuts
• cinnamon sticks
• dried fruit

Or Whipping foods such as:

• homemade whipped cream
• cream cheese schmears
• butter

USAGE MODE INTRODUCTION
Warm reminder: Considering the user experience with this product, we sincerely recommend that users can use “Lock On “mode to make food.
The “Pulse” mode
Because the countertop blender’s motor is so powerful, if you aren’t careful you can quickly overprocess food and turn it into mush. That is why when you want to make foods such as chunky salsa, or coarse chopped onions, the Pulse technique is key.
To Pulse you simpry press down on the cup very quickly and immediately release. For foods that you want coafsety chopped, a quick tap on the top of the cup s all you need. Then let the product come to a complete stop and tap again until you get the con-sistency you desire.

THE SECRET: The trick to successful Pulsing is to make sure that the machine doesn’t accidentally slip into Lock On mode. To avoid this, simply use your other hand to apply counter-clockwise pressure on the cup as you Pulse.
To start… hold the cup at the base and apply counter-clockwise pressure to it to keep it from locking on.
Then… with your other hand, tap the top of the cup and immediately release. Continue Pulsing until you get the consistency you want.

The “”Shake™” Technique
Sometimes, when you are working with thicker ingredients, the density or the mixture can make it hard tor the ingredients toward the top of the cup to make it down to the blade.
If some ot your ingredients are having a hard time making it down to the blade. simply use this technique.
The “”Tap”” Technique
If you have a problem with sticky ingredients clinging to the side of the cup Instead of being recirculated into the cutting zone…
First… Take the cup off the Power Base and Tap the cup and blade assembly on the counter to force the ingredients down into the blades.
Then… Replace the cup and blade assembly to the Power Base and finish processing.

“Lock On “mode
This pattern is a much more common pattern! If you need to make a degree of delicate food, such as smoothies, juices, etc. You can adopt this pattern directly.
For hands-tree operation, press down and gently turn the cup clock-wise until the tabs lock under the lip of the Power Base. Once you are in Lock On mode, the motor runs con-tinually. To turn it off, simply twist the cup bach counter-clockwise and release the cup.

‘Warning
Precautions, please read all the contents before using the machine for the first time.
After-sales
It contains after-sales service terms and after-sales emails
Tip:

1. You are happy, we are happy! If you have some good suggestions, you can let me know through our mailbox.
2. Our dedicated and friendly customer care team will work at full stretch to put a smile back on your face and restore your confidence in Ganiza.

CLEANING AND MAINTENANCE

IMPORTANT:
Everyone hales cleaning up, which is just one more reason the countertop blender is so great.
Cleaning the countertop blender:

1. Always unplug the countertop blender when cleaning or assemting.
2. Please clean the cup, knife holder, lid and other accessories immediately after use.
3. Motor, main engine, can not be washed with water, can not be immersed in water or other liquids. When you need to clean, you can wipe with a soft, damp cloth,
4. The blade is too sharp to be touched directly by hand. To avoid injury, keep the blade clearly visible during cleaning.
5. After cleaning, dry or air each part of the product before reassembling and putting it away.
6. It is strictly prohibited to sterilize all parts of the product at high temperature.
7. All cups, LIDS, etc. are not recommended for dishwasher washing! If you use the dishwasher, it may cause deformation of the plastic! Since the cups and LIDS are easy to clean, please rinse with clean water or soapy water!
8. The blade is removable, and the removed blade and stainless steel parts are allowed to be washed in the dishwasher!

Note: Silicone seals are not recommended for dishwasher cleaning! May cause deformation, affect the sealing effect of the product!
Warm suggestions:
Since the user cleaning factor has been carefully considered at the beginning of this product design, the knife holder, cup and lid of this product are designed to be easily disassembled. All accessories are easy to clean with water or soapy water! In order to better protect our products and extend their service life, we sincerely recommend that all users use clean water or soapy water to clean this product! Let’s cherish our ganiza countertop blender!
Thank you very much!

ENVIRONMENT FRIENDLY DISPOSAL

**** You can help protect the environment!
Please remember to respect the local regulations: hand in the non-working electrical equipments to an appropriate waste disposal center.

TROUBLESHOOTING GUIDE

The product work for period of time and suddenly stops
working!| It may be because the overheat protection is activated| This product is equipped with a safety overheat protection design, if the
product does not work during use, it may be because the overheat
protection is activated! Please unplug and let the product cool for 30
minutes before use!
If leakage is found during use!| Maybe the seal ring forgot to be put on.
The sealing ring may be deformed or damaged.
It’s probably not tightened| If leakage is found during use, the product itself may be good! Please check
whether the cup fits the cutter seat tightly. Or check whether the seal
ring inside the cutter seat is missing? Or is the seal properly assembled? If the
above check is no problem, it may be a deformation of the seal ring, please
replace the excess seal ring we have equipped!
Abnormal vibration or loud noise occurred in the product| The product is not installed properly.
The product is placed on an unstable table.
The voltage is too high.
Excess of ingredients.| Reassemble in place. The product is placed smoothly.
Check whether the voltage is too high.
Turn off switch, disconnect power and remove excess ingredients.
Stuck knife| The blade is caught in the ingredients| Turn off the switch, disconnect the power, and remove the stuck ingredients

Note:
The above are common fault analysis and troubleshooting methods. For other problems, please contact our customer service department. Do not disassemble or repair by yourself.

WARRANTY POLICY

Your appliance is covered by our warranty for 12 months from the date of initial purchase. This gives you peace of mind that if, during this time, your appliance proves to be defective, either in workmanship or materials, we will repair or replace your appliance at our after-sales service center. Appliances must be properly installed, positioned and operated according to the instructions in the user’s manual. The surety shall not be liable for accidental or consequential damages.
The Guaranteed conditions
Documentary proof of the original purchase date is provided.
The appliance has been installed and operated correctly and in accordance with our operating and maintenance instructions.
The appliance is used only on the electricity supply on the rating plate.
The appliance has only been used for normal domestic purposes.
The appliance has not been altered, serviced, dismantled or otherwise interfered with by any person.
Any parts removed during repair work or any product that has been replaced become our property.
The guarantee is not transferrable if the product is resold.
The Guarantee does not cover
Accidental damage, misuse, or abuse.
Replacement of any consumable item or accessories.
Repairs or replacements are required as a result of authorized repairs or inexpert installation that fails to meet the requirements contained in the user guide or instruction book.
Repairs to products used in commercial or non-residential household premises.
After sales service
Please keep your purchase receipt or other proof of purchase in a safe place, as you will need to show us this document if your product requires warranty service during the warranty period. Please also record your product details below, this will enable you to access our services faster and help us identify your products.

WARRANTY CARD

Product name| Countertop Blender| Model number| GB10| Shop name:
Address:
Telephone number:
---|---|---|---|---
Guest information| Name:
Address:
Warranty period| Within one year from the date of purchase
From……….. year……………. month………….
*Consumables not included

LINKZONE TECHNOLOGY CO, LIMITED
ROOM 510 5/F WAYSON COMMERCIAL BUILDING 28
CONNAUGHT RD WEST SHEUNG WAN HK
Email:[email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>