KAFIYA iPhone 15 3 In 1 Wireless Charger User Manual
- June 14, 2024
- KAFIYA
Table of Contents
3in1 Wireless Charger
User Manual
Device Layout
Product Parameter
Product name: 3 in 1 wireless charger
Material quality: ABS + Silicone
Dimensions: 24.57.51.2CM
Interface: USE=C
Input: 8V=2412V=24
Mobile phone output: SW/7.5W/10W/15W
Watch output: 2.5W
Arpad’s: 5W
Compatibility: support mobile phones, Alpo’s, and iWatch that comply with the
Qi standard
Steps for usage
The device is connected to the power supply through the charging cable, and
then it can be powered on.
When charging the mobile phone, place the mobile phone flat in the mobile
phone charging area to start charging the mobile phone.
After fully charged, simply take off the phone, during the charging process,
If you need to terminate the charging, take it directly.
When charging the Apple Watch, place the iWatch flat in the charging area to
start charging the watch. After fully charged, directly remove the iWatch;
During the charging process, if you need to terminate the charging, remove the
iWatch directy.
When charging the Arpad’s , place the Arpad’s flat in the charging area to
start charging ;
After fully charged, simply remove the Arpad’s; During the charging process,
if you need to terminate the charging, remove it directly.
Special Note:
- When charging the iWatch, recommended to use flat and vertical charging at 90 degrees. Do not select 30 degrees, as charging may not be possible at this angle.
- Recommended to use the supplied charging cable for power supply, and not to use the original iPhone cable.
Packaging accessories
3 in 1 wireless charging 1
USB=C charging cable 1
Mannual 1
Facing box 1
18W Adapters 1
The content of this manual and product specifications are subject to change without notice
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>