Rollerhouse DC2700 15 Channel Blind Controller Instructions

: June 14, 2024
: Rollerhouse

Table of Contents

Read User Manual Online (PDF format)
Download This Manual (PDF format)

Rollerhouse DC2700 15 Channel Blind Controller Instructions

Technical parameters
- Input: 5V
- Frequency: 433.92 Mhz
- Distance: 60 meters outside and 30 meters inside
- Temperature: -20°-85°
- Output Speed: 22-44 r/min (see name plate)
- Running Limit: unlimited
- Waterproof Grade: IP20
Match up
- Press and hold Program button on motor head for 2 seconds, motor jogs and sends out long noise
- Press P2 twice, the motor buzzes twice (The interval of twice pressing please not less than 0,5 second)
- Press UP button motor jogs, and sends out noise for 6 times
**Change direction

**

  * Press P2 twice, the motor buzzes twice (The interval of twice pressing please not less than 0.5 second)
  * Press DOWN button motor jogs, and sends out noise for 6 times

**UP and DOWN limit setting

**
- Press P2 button the motor jogs and sends out noise twice
- Press UP button the motor jogs and sends out noise
- Press P2 button the motor jogs and sends out noise
- Press UP button, let the blinds reach. the desired limit position, then press STOP button and hold for 3 seconds
- Press STOP button and hold for 3 seconds
- Press DOWN button, let the blinds reach another desired limit position
**Delete UP and DOWN limits

**

  * Press P2 button the motor jogs and sends out noise
  * Press DOWN button the motor jogs and sends out noise
  * Press P2 button the motor jogs and sends out noise

**A third limit setting up

**

  * Press P2 button the motor jogs and sends out noise
  * Press STOP button twice the motor jogs and sends out noise for 4 times
  * If want to use the third limit. no matter where the blinds is press and hold STOP button for 3 seconds

**Delete the third limit

**

  * Press and hold STOP button for 3 seconds, the blinds stop at the third limit position
  * Press P2 button the motor jogs and sends out noise.
  * position Press P2 button the motor jogs and sends out noise. Press

**Tilt function / dot movement

**

  * Press P2 button the motor jogs and sends out noise
  * Press UP button the motor jogs and sends out noise
  * Press DOWN button the motor jogs and sends out noise

**Add new transmitters

**

  * Press P2 button on a matched transmitter A twice, the motor jogs and sends out noise Di
  * Press P2 button on a new transmitter B, motor jogs, and sends out 7 times of Di