LENOXX WM150 Portable Twin Tub Washing Machine Instruction Manual
- June 14, 2024
- lenoxx
Table of Contents
LENOXX WM150 Portable Twin Tub Washing Machine
Carefully read all instructions before use and save for future reference.
BEFORE YOU START
Please read all instructions carefully and retain for future reference. We recommend that, where possible, all items are assembled near the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled. Always place the product on a flat, level and stable surface. Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard. Never immerse the cord or appliance in water. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Technical Parameters
- Voltage 240V 50Hz
- Water Capacity High: 29.5L Low: 17.4L
- Capacity Wash: 4.6kg Spin: 3kg
- Model Number WM150
STRUCTURE AND PARTS
- Spin Cap
- Spin Tub
- Spin Cover
- Cold Water Inlet
- Control Panel
- Pulsator
- Wash Cover
- Body
- Base
- Wash Timer Switch
- Wash & Drain Selector Switch
- Spin Timer Switch
- Drain Hose
- Power Cable
- Back Cover
WASHING INSTRUCTIONS
Preparation
- Place the machine on a flat, level surface near a drainage point.
- Lay down the drain hose on the ground level.
- Use the water inlet hose to connect the cold water tap to the water inlet.
- Adjust the water level based on the type of clothing and its weight.
- Turn on the power.
Washing
- Set the Wash & Drain Selector Switch to the wash position
- Place the clothes into the tub, adjust the water level to the desired position and put in the proper amount of detergent into the wash tub.
- Set the Wash Timer and the washing machine will start to wash.
- After washing, set the Wash & Drain selector switch to the Drain position to drain the water
Spinning
- After spinning, set the water inlet hose to the water inlet of the spin tub position for 20-30 seconds.
- According to the Spin Timer process, spin the clothes for 1min – 5min, and repeat once or twice.
Rinsing
- After spinning, the spin tub will stop. Open the spin cover and transfer the clothes to the wash tub to prepare for rinsing.
- Repeat the washing process but do not add any detergent.
IMPORTANT SAFEGUARDS
For your own safety, ensure the machine is connected to a suitable
electrical supply.
Never put your hands into the spin tub whilst it is working.
To prevent machine damage or water blockage, avoid washing textiles that
contain volatile materials.
The timer should always be turned clockwise.
If abnormal sounds or movements occur during operation, stop the washing
machine immediately and perform a thorough check.
Refer to the Troubleshooting section of the manual for assistance.
When washing, ensure that the water temperature remains below 60°C to prevent
deformation of the plastic components.
This machine is designed for cold-wash operations.
MAINTENANCE
When cleaning the machine, it is recommended to use a soft cloth to prevent
scratching the surface.
Always unplug the machine before cleaning. Do not put the washing machine
outdoors or in damp areas such as bathrooms. Do not place heavy objects on top
of the washing machine. Do not place the washing machine near heat-generating
items such as heaters or gas cookers.
TROUBLESHOOTING
If the problem persists and was not resolved, please contact our customer service for further assistance. You can reach us at 1300 666 848.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>