Falcon 19 Inch WebOS Smart Camping TV 4G Combo and Bluetooth Soundbar Bundle User Manual

powered by WebOSHub

Quick Start Guide
FN-TV19-S
Please read this manual carefully before TV operation.
Retain it for future reference.

PREFACE

1. Read this Quick Start Guide before starting Set-up.
2. Then, carefully follow the Instructions, heeding all Warnings.
3. Do Not remove the TV back cover or block the TV ventilation openings.
4. Do Not use the TV near water or a heat Source.
5. Do not pinch or cut the Power Cord.

Note:
The product and illustrations in this user’s manual is only for explanation purposes and may vary depending on model.

WARNING
Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• Using cabinets or stands recommended by the manufacturer of the television set.
• Only using furniture that can safety support the television set.
• Ensuring the television set is not overhanging the edge of the supporting furniture.
• Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
• Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the television set or its controls

If your existing television set is being retained and relocated, the same considerations as above should be applied.
The plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Unpack the TV and Accessories from the Carton BoX

1. Please see the unpacking instructions on the top of the carton box (and below).
2. As noted, be careful not to grab or put pressure on the TV screen.
3. Check the carton box carefully for all included Accessories.

Package Contents

  LED television
Remote control with 2 AAA batteries
Red cigarette lighter
Quick Start Guide
VESA mounting screws
Power adaptor (12V, 3A)
Mini AV Cable
Base stand and screws

What You Will Need for Set-up (Not Included)

• Philips Head Screwdriver
• Internet Connection (Needed for Smart TV Streaming)
• Wireless Router (Needed for Smart TV Streaming)
• Computer, Tablet or Smart Phone (Needed for Smart TV Set-Up)

Attach the Table Stands

How to assemble the stand
If you need to remove or assemble the stand please read the following instructions.

• Before attaching/detaching the stand, make sure to turn off the TV.
• Before performing work, spread cushioning over the base area to lay the LED TV on.

This will prevent it from being damaged.
Assembling instruction:
Put the television on the table, fix the stands with four screws given in the carton .
Step1: Fasten the base assembly with screws given in the carton.
Step2: Insert the assembled base into the hole, take out screws provided with TV set and tighten them into screw holes.

• To disconnect the stand from the TV, perform the above steps in reverse order.

Front Panel

The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu.
To use the more advanced features, you must use the remote control.

Specifications

(Two AAA size batteries)
Dimensions (LxWxH)| N with stand| W438xD305xH153(mm)
N without stand| W438xD274xH52(mm)
Weight
(Net weight)| TV with stand| 2.75kg
N without stand| 2.60kg
Work temperature| 0°C-40°C

NOTES:

• Design and specifications are subject to change without notice.
• Weight and Dimension shown are approximate.

Connect The TV

1. Insert the female end of the Power Adaptor into the back of the TV.
   Then carefully plug the standard AC plug end into a 230V AC outlet.

2. If you are connecting other devices to the TV, utilize the appropriate optional cables and connect to the appropriate ports on the back or side of the TV.

Prepare The Remote Control

Remove the battery cover and insert the provided batteries. Then replace the battery cover.

Installing Batteries

1. Open the battery compartment cover on the back side.

2. Insert two 1.5VAAA size batteries in correct polarity. Don’t mix old or used batteries with new ones.

3. Closed the cover.

• Point the remote towards the remote control sensor of the TV and use it within 8 meters.
• Put the used batteries into the recycling bin since they can negatively affect the environment.

Note:

• Batteries should last approximately one year under normal use (actual use will vary).
• If the TV will remain inactive for an extended period of time, remove the batteries from the remote control to avoid possible damage due to leakage.
• Do not mix old and new batteries or different types of batteries.
• Do not throw batteries into fire or water.
• The batteries (battery pack or batteries installed) should not be exposed to excessive heat such as sunshine, fire or the like.

Remote

1. POWER: Turn the TV on and off.
2. : Selects an input source.
3. +/- : Press these buttons to adjust the volume.
4. / : Press these buttons to change channel upward or downward.
5. : Mutes the sound.
6. : Search.
7. : Smart TV – return to home screen.
8. : It displays the additional buttons on the remote control.
9. Arrow buttons :Use to select on-screen menu items and change menu values.
10. : Confirms selection.
11. BACK: Return to the previous menu / Exit the menu
12. : Enters the Quick Settings menu.
13. : Channel ist
14. : Play.
15. : Pause.
16. : The function to stop DVD play.
17. NETFLIX: If network connects, press this key to view NETFLIX directly.
18. Prime Video: If network connects, press this key to view Prime Video directly.
19. Disney+Apps: If network connects. press this key to Disney+ directly.
20. DVD: When input is in DVD mode,press the DVD key to open the DVD. When the DVD is working or not in use, press this key to close the DVD to reduce power consumption.
21. : Ejectiinsert disc.
22. : The functions of up selection and previous track in DVD.
23. : The functions of left selection and fast back in DVD.
24. : The functions of right selection and fast forward in DVD.
25. OK: The functions of confirm and play/pause in DVD.
26. : The functions of down selection and next track in DVD.
27. MENU: go back to catalogue of DVD.
28. : The function to stop DVD play.
29. 0-9: The digital input in DVD.
30. SETUP: The function of setting in DVD.
31. GOTO: The function of jump to the specified label.

Trouble Shooting

Having trouble?
Don’t worry,it’s usually an easy fix.

After Auto Tuning only some channels are available| Check your area is covered by Digital Video Broadcasts. Try re-tuning or manually tuning missing channels. Check that you are using the correct antenna type.
---|---
Channel cannot be selected| Check if the channel has been blocked in the main menu settings.
USB not playing| Please check connecting USB cable and power supply is connected. Hard drive has not been formatted. Please make sure USB disk is compatible and the multimedia data formats are supported.
Picture is distorted, macroblock, small block, dots, pixelization, etc| Compression of video contents may cause distortion especially on fast moving pictures such as sports and action movies.
Noise from speaker| Check cable connections, make sure a video cable is not connected to an audio input.
Low signal level may cause sound distortion.
TV turns off automatically| Check if the Off Timer is set to On in the Setup menu.
Sleep Timer may have been enabled.
If there is no signal for about 10 minutes from an input, the TV will turn off.
TV turns on automatically| Check if the On Timer is set to On in the Setup menu.
Picture is not shown in full screen| Black bars on each side will be shown on HD channels when displaying SD (4:3) contents.
Black bars on Top & Bottom will be shown on movies that have aspect ratios different from your TV.
Adjust picture size option on your external device or TV to full screen.

WEE2.0

It provides guides related to TV manipulation, broadcasting, content utilization, device connection, smart functions, settings and problem solving so that user can refer to it when using TV.
You can watch the manual at the same time while watching TV or running the app.
You can easily view the user’s manual using the Description menu or Magic Explorer function.

Safety default password

You can enter the default password”0000” to turn on/off safety function.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>