Puiuisoul MD-090P Emergency Radio User Manual

: June 14, 2024
: Puiuisoul

Table of Contents

Puiuisoul MD-090P Emergency Radio
RADIO OPERATION
CHARGE THE DEVICES
POWER METHODS
KIND REMINDER
SPECIFICATION
WARRANTY
PACKING LIST
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Puiuisoul MD-090P Emergency Radio

RADIO OPERATION

Turn the “Volume” Dial clockwise to power on the radio and adjust volume.
Select FM/AM/WB with radio band switch. Extend the antenna to get better signal reception, especially listening to the FM and NOAA broadcasts.
Turn Tuning Dial to select station. Green tune indicator turns on when the station selected is fully engaged.
Turn the “volume” dial to the OFF position and the radio will turn off.

SOS ALARM

Double click the SOS button in the top right corner, it will activate a loud siren and a flashing high beam.
Press the SOS button again to turn it off.

FLASHLIGHT

The first press on the flashlight button, the far beam lights up. The second press on the flashlight button, the dipped beam lights up. The third press with both far and dipped beam light up. The forth press with both light off.

READING LAMP

Turn the sensor switch to the LIGHT position, flip the solar panel, the reading lamp lights up. Close the solar panel, and the reading light goes out.

MOTION SENSOR

Turn the sensor switch to the AUTO position, flip the solar panel, When human moving within 3 meters, the reading lamp lights up. When there isno human moving in this range, after 30 seconds, the reading lamp will turn off. Close the solar panel, the reading lamp will extinguish.
Please turn the sensor switch to the LIGHT position when not in use.

CHARGE THE DEVICES

The waterproof cover on the side of this product has a USB output port and a USB input port.
Connect the USB device to the USB output port of the unit via USB cable to power the USB device, the blue power indicator lights off successively during charging.

POWER METHODS

USB charging
Connect the supplied Micro USB cable to the Micro USB Input port on the right side of the unit to charge the battery inside. At this time, 4 blue power indicator lights will light up in sequence.

Hand Crank

The radio can also be charged by turning the handle on the bottom of the device and activating the dynamo. And the red power indicator will light on.
The handle can be turned either clockwise or counterclockwise. Spin the handle for 1 minute at the speed of 130 rpm. It can be used for high beam illumination for 30 minutes or radio for 6 minutes.

SOLAR POWER

Expose the solar panel in clear sunlight to let it charge as efficiently as possible.
The red power indicator lights will light up when the radio received enough sunlight to start charging up.
It is mostly used for maintaining the battery, to extend its life.

POWER INDICATOR

This unit has 4 blue power indicator lights to show the power capacity. The power indicator will light up for 30 seconds when turn on the radio, flashlight, reading lamp and the indicator light stays on when charging and discharging.
4 lights up: C>75%
3 lights up: 50 %<C<75%
2 lights up: 25 %< C<50%
1 lights up: 3 %< C<25%
The first light flash: C<3%
C is capacity

KIND REMINDER

For the first use or when the unit idles over 60 days, please hand crank for 1 minute to activate the internal battery.
The device shall not be exposed to dripping or spla-shing, and objects filled with liquids should not be placed on the device.
Please do not over discharge the unit, so as not to reduce the internal battery life, or even damage the battery.
Avoid flashlight light directly into the eyes, or it will hurt the eyes.