Headsets X15 Wireless Headset User Manual
- June 4, 2024
- Headsets
Table of Contents
instructions
Take out the two headphones horn the charging bin respectively or open the cover of the charging bin. Mien waiting for pairing, the red and blue lights of the two headphones have It The two earphones wi be turned on automatically and paired. When the red and We lights of the earphones flash slowly, it indicates that the earphones have been pared successfully. Turn on the Bluetooth function of the mobile phone, search kW and click Gamed After connecting, the two headphones do not flash.
Operation function description
-
Power on
Mode 1: pick up the headset from the charging bin and start it automatically
Mode 2. press and hold the headset for 5 seconds lo tum d on -
Shutdown
Mode 1: put d into the charging bin and shut down automatically
Mode 2: press and hold for 5 seconds shut down in the power on state -
Music playing Pause / play Oki Up / down: three hits Volume up / down: double chi* Summon Sit long press for 1.5 seconds Press for 1 second during the incoming call: reject the call
-
Telephone mode Answer the cat did( (double click to switch after the third-party call is connected) Hang up: click headset during a call
-
Single ear connection: take out a headset separately from the charging bin, the headset will automatically alert, the red and blue light will flash, turn on the Bluetooth function of the mobile phone, search sx15 and tick Canned
-
The game mode and music mode can be swathed after the mobile phone connection is shot four times. Voice prompt is required red
charging
Headset charging: put the headset into the charging bin to charge the headset
The red light of the headset is always on The headset Is fully charged: the
red light is off
The charging bin charges the headset
Mode 1. automatic charging with the cover closed
Mode 2: open the cover for charging. After opening the cover for 10 seconds
without taking out the headset, the SV charping is automatically started, and
the left and right charging progress bar lights rur around Charging in the
charging bin: plug in the power supply to charge the charging bin, the running
light ashes, the display screen dis slays the current charging power during
changing, and 100 is always on after being fully charged Power display: the
real power of the headset can be displayed in the upper right com er of the
phone
Product Description
Product model: x15
Bluetooth version: v5.2
Bluetooth protocol HSP, HFP, A2DP, AVRCP
Working voltage: 3.7-4.2
Charging voltage: earphone 5V / imA, charging box SV/ 1A
Headset batlety capacity 40mAh
Charging bin capacty: 300mAn
Transmission distance: 10M
Tak time: 4hours
Playback time: 4 hours.
Headset charging time: + 1Shours
Charging time of storage box 1 2 hours
Support system: all Bluetooth-enabled devices and mobile phones
Packing list charging bin 1, headset: |, R,
Data cable 1, manual * 1
common problem:
Q: Does the charging cham ber charge?****
– A; Please try changing a data line, or check whether the interface is connected property.
Q: Does the headset charge?****
– A: Make sure there is power in the charging com partners, take and put the earphone several times more, and press the earphone with your hand to make the charging contact fully contact.
Q: Is the earphone signal unstable or the earphone does not sound?****
– A: Please wear earphones in the right way. Do not use them with partition
walls or obstacles.
When using outdoors, please put your mobile phone on as much as possible Fr
ort pocket.
Q: Do two “X15” pairing names appear when searching Bluetooth?****
– A; You need to delete the two pairing names on the m chile device, take them out from the changing bin, reconnect them, and then connect the mobile phone
Q: & the answering voice sm allor unclear?****
– Please Iry to tum the volume of the headset or mobile phone to the maximum, and the mobile phone should not be too far away from the headset.
Q: How to connect two earphones o two mobile phones?****
– A Toke a headset out of the charging compartment, tum on the red and blue lights automatically, tum on the Bluetooth of the mobile phone and search the X15 connection(connection successful: do not flash). After the first adept is successfully connected to the first mobile phone, tum on the second headset and the second headset Two cell phone connections.
matters needing attention:
- Please use this product in an effective environment (no obstruction of 10 meters). If the distance exceeds the effective distance, it may get stuck and disconnected. Please use it correctly according to the instructions.
- When charging the charging cabin, a 5V/ 1Acharger shall be used. Do not use fast charging or other chargers with a voltage higher than SV.
- Please keep away from Wifi, routers,s and other high4requency transmitting equipment as far as possible to avoid affecting Bluetooth signal reception.
- Do not remove or refit the earphone for any reason. Do not let the earphone contact with corrosive liquid. Otherwise, the earphone may fail and burn, which are not covered by the warranty,
- Do not use the equipment in thunderstorm weather. Thunderstorms may cause abnormal operation of the equipment and increase the risk of electric shock.
- Please avoid using this device light near the eyes of children or animals.
- Do not use the equipment in an environment with too high or too low temperature (below 0 C and above 45 C).
Warning!
This product contains a built-in lithium battery. Do not expose this product fo strong sunlight, bake or throw it into the fire to avoid an explosion.
FCC Warning
15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause the undesired operation.
15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure
Statement:
- This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
- This equipma ent should be installed and operated with minimum distance 5mm between the radiator and your body.
15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>