Headsets J1 Wireless Business Headset User Manual

Headsets J1 Wireless Business Headset

Connection Instructions

Connect

The red and white lights flash alternately to start searching for connections. Enter phone Bluetooth settings. Find the device and click J1.

Accessories introduction

Main Parts

Wireless Audio Receiver .Wireless business headset. Type c charging cable.

Earphone earhook X1 Waterproof storage bag X1

Transparent silicone ear caps large, medium and small X3 Sealed silicone ear caps large, medium and small X3

Button control instructions

3 Mode

Music Mode

Short press the multi function button, play/pause music. Short press +button, increase/ decrease volume. Long press + button for more than 2 seconds to play the next/previous When a call come in during playing, short press the multi- function button, pause music and answer the call Press the multi-function button again, hang up the call and the music continues to play.

Charging method

When charging, open the dust plug and insert the charging cable of the Type-c port. After the charging cable is connected the indicator light is always on to indicate that it is charging and the indicator light is off to indicate that the headset All charging has been completed.

Call/noise reduction instructions

Microphone

Noise Reduction Mic ENC (Environmental Noise Cancellation, environmental noise reduction technology. It can effectively suppress 90% of the reverse environmental noise and accurately calculate the direction of the caller’s speaking. The ENC microphone is equipped in the middle of the earphone with background noise collection function which is convenient for collecting collect ambient noise.

Noise Reduction Mic

ENC Environmental Noise Cancellation, environmental noise reduction technology. It can effectively suppress 90% of the reverse environmental noise and accurately calculate the direction of the caller’s speaking. The ENC microphone is equipped in the middle of the earphone with background noise collection function which is convenient for collecting collect ambient noise.

Call Mic

Used to pick up the voice signal of the call to make the other party sound better and clearer.

Activate call mute mode

Press the volume up and volume down at the same time, and you will hear a beep to enter the call mute mode.

Wear instructions

Stable

Wearing the left ear

When wearing, adjust the ear cap to the best wearing state.

How to wear ear hooks

Clamp the ear hook clip to the sounding handle of the earphone when wearing, and hang the ear hook behind the ear when wearing, which can effectively improve the wearing stability and prevent the earphone from falling off.

Specification

1. Bluetooth Version: V5.1
2. Weight: 0.4 ounces
3. Size:98 X 13X 30 mm
4. Talk time: 10H
5. Charging time: 1.5H
6. Bluetooth support: phone hands-free
7. Bluetooth working time: 10H continuous playback
8. Bluetooth standby time: 180H
9. With microphone: dual microphone call noise reduction
10. Product material: silicone+ plastic (ABS)
11. Bluetooth support protocol: A2DP/AVRCP/HSP/HFP/SPP/HID
12. The maximum effective distance of Bluetooth receiving (under the state of straight line without obstruction to 33 foot.

After Sales Service and support
If the product you purchased is damaged, please return it to our dealer for warranty. If you have good suggestions, you can contact us, and we will actively improve our products and services. If you have other questions, you can also contact us through this email [email protected] we will reply you within 24 hours.

FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions this device may not cause harmful interference, and  this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the  equipment.

NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition 6 without restriction

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>