FNRIDS 8M EV Charger Cable User Manual

FNRIDS 8M EV Charger Cable

Product Information

• Specifications
  • Standard: IEC 62196-2
  • Voltage: 110-240V AC
  • Current: 13A
  • Rated Power: 2.2kW
  • Frequency: 50Hz/60Hz
  • Insulation Resistance Operating Temperature: 5%~95%RH
  • Control Box Waterproof Rating: IP54
  • Charging Plug Waterproof Rating (when plugged in): IP65
  • Mechanical Life: No-load plug-in/pull-out> 10,000 times
  • Impact of External Force: 10M drop and 1.5T vehicle run-over pressure
  • Cooling Method: Natural air cooling
  • Control Box Size: L210 x W85 x H50 (mm)
  • Control Box Material: PC
  • Cable Layer Material: TPU
  • Cable Thickness Protection Types: Overvoltage / Undervoltage / Overcurrent / Over-Temperature / Leakage protection

How To Start/Stop Charging

How to Start Charging?

1. Turn off your car, engage the handbrake, and lock the car doors. (Ensure that your car is unlocked and no charge settings/timers are turned on.)
2. Plug the UK 3-pin plug into the wall socket. (Ensure a secure connection by firmly pushing the plug until the pins fully latch.)
3. Connect the Type 2 charging plug into your car’s charging port. (Ensure a secure connection by firmly pushing the plug until the pins fully latch.)
4. Lock your car and let it charge.

How to Stop Charging?

1. Unlock your car.
2. Disconnect the Type 2 charging plug from your car’s charging port, and then unplug the UK 3-pin plug from the wall socket.
3. Cover the Type 2 charging plug with the dust cover.
4. Store the EV charger in the cable bag.

Indicator Light Description

Red)

Product Troubleshooting

• C P Voltage Abnormal
  • Unplug the power plug from the wall socket.
  • Unplug the charging plug from the vehicle.
  • Replug both and check if the issue persists.
  • If the problem continues, please contact customer service for assistance.
• Leakage Protection
  • Cut off the electricity immediately.
  • Unplug the power plug from the wall socket.
  • Unplug the charging plug from the vehicle.
  • Contact customer service for further support.
• Under-/Over-Voltage Protection
  • If the voltage is unstable, it may trigger the low/high voltage protection of the product. Please wait for a while until it returns to normal operation.
• Frequently Asked Questions
  • Q: What is the waterproof rating of the control box?
  • A: The control box has a waterproof rating of IP54.
  • Q: How many times can the cable be plugged in/pulled out with no-load?
  • A: The cable can be plugged in/pulled out with no-load for more than 10,000 times.
  • Q: What is the cooling method used for the charger?
  • A: The charger uses natural air cooling.

Package Contents

Product Specifications

/ Leakage protection

How to Start

How to Start/Stop Charging

• How to Start Charging?
  • Turn off your car, engage the handbrake, and lock the car doors. (Ensure that your car is unlocked and no charge settings/timers are turned on.)
  • Plug the UK 3-pin plug into the wall socket. (Ensure a secure connection by firmly pushing the plug until the pins fully latch.)
  • Connect the Type 2 charging plug to your car’s charging port. (Ensure a secure connection by firmly pushing the plug until the pins fully latch.)
  • Lock your car and let it charge.
• How to Stop Charging?
  • Unlock your car.
  • Disconnect the Type 2 charging plug from your car’s charging port, and then unplug the UK 3-pin plug from the wall socket.
  • Cover the Type 2 charging plug with the dust cover.
  • Store the EV charger in the cable bag.

Indicator Light Description

Troubleshooting

• CP Voltage Abnormal
  • Unplug the power plug from the wall socket.
  • Unplug the charging plug from the vehicle.
  • Replug both and check if the issue persists.
  • If the problem continues, please contact customer service for assistance.
• Leakage Protection
  • Cut off the electricity immediately.
  • Unplug the power plug from the wall socket.
  • Unplug the charging plug from the vehicle.
  • Contact customer service for further support.
• Under- / Over Voltage Protection
  • If the voltage is unstable, it may trigger the low/high voltage protection of the product. |
  • Please wait for a while until it returns to normal operation.
• Under- / Over Current Protection
  • If the current is unstable, it may trigger the low/high current protection of the product.
  • Please wait for a while until it returns to normal operation.
• Over-Temperature Protection
  • If the control box temperature is too high, unplug the charging cable and reconnect the power plug to restart charging after the control box cools down completely.
  • If the control box temperature remains high, the charger will automatically stop charging for safety reasons. It will restart charging once the control box cools down completely.

Frequently Asked Question

1. Q: Why can’t my charger charge?
2. A: There are 4 common reasons:
   • Loose circuit connection. Check the connection between the charging plug and the vehicle, as well as the power plug and the wall socket.
   • The power socket is not working. Check the circuit breaker and other circuit loads. Try another wall socket.
   • Charging is restricted by the vehicle’s charging settings. Ensure that the vehicle has canceled scheduled charging or the maximum charging threshold before charging.
   • The vehicle battery is fully charged.
3. Q: Why does charging stop during the charging process?
4. A: There are 3 common reasons:
   • The vehicle battery is fully charged, and the charger will automatically stop charging.
   • The charging current or voltage is unstable. To protect the vehicle battery, the charger will automatically stop charging. Once the current and voltage stabilize, the charger will resume charging automatically.
   • The charging temperature is too high. For safety reasons, the charger will automatically stop charging. Once the temperature returns to a normal level, the charger will resume charging automatically.
5. Q: Why does my charger heat up?
6. A: There are 2 common reasons:
   • High charging current or voltage. Please use a wall socket rated for a current of 13A or higher for charging. If your wall socket is rated for 10A, do not charge continuously for more than 8 hours.
   • High external ambient temperature. Please avoid charging in direct sunlight.
   • PS: If the problem still cannot be resolved, please contact customer service through Amazon or send an email to fnrids.service@gmail.com. We are happy to assist you.

Warnings

• Do not place flammable, explosive, or combustible materials, chemicals, flammable vapors, or other dangerous items near the product.
• Keep the charging plug clean. If it becomes dirty, please wipe it with a clean, dry cloth.
• It is strictly forbidden to touch the charging gun core with your hands when charging.
• Do not use the product if the charging plug or charging cable is defective, cracked, worn, or broken.
• If you encounter such issues, please contact customer service for assistance.
• Do not attempt to disassemble, repair, or modify the product. Improper operations may cause damage, water leakage, and electrical hazards.
• If there is a need for maintenance or modification, please contact customer service for help.
• If there is any abnormal situation during use, all input and output power must be cut off immediately.
• Exercise caution when charging in rainy or thunderstorm conditions.
• Keep the charger out of the reach of children during the charging process to prevent injury.
• Prohibit the vehicle from driving while charging. Charging should only be performed after the electric vehicle is turned off.

Warranty Terms and Conditions

• Warranty Period:
  • This product is covered by a ONE-YEAR warranty from the date of purchase. The warranty covers defects in material and workmanship under normal use.
• Warranty Coverage:
  • The warranty includes repair or replacement of defective parts or products. It does not cover damage caused by misuse, abuse, accidents, unauthorized modifications, or external factors.
• Warranty Claim Procedure:
  • For any warranty claims, please contact the seller via Amazon or email at fnrids.service@gmail.com. Provide photos or videos to expedite the problem- solving process.
• Warranty Service:
  • The seller will assess the warranty claim and may repair or replace the defective product. If repair or replacement is not feasible, a full or partial refund may be offered at the seller’s discretion.
• Limitation of Liability:
  • The maximum liability under this warranty is limited to the original purchase price of the product. The warranty does not cover any indirect, consequential, or incidental damages.

All of our products are backed by a warranty period of one year or more, covering any quality issues. If you have any concerns or questions regarding our products, please feel free to contact us at fnrids.service@gmail.com. We are committed to providing excellent customer service and will offer a free replacement if needed. Thank you very much!

• Contact Email: fnrids.service@gmail.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>