SwitchBot W0701600 Curtain Smart Electric Motor User Manual
- June 14, 2024
- SwitchBot
Table of Contents
SwitchBot Curtain Rod 2
User Manual www.switch-bot.com
V4.6-2208
Please read this user manual carefully before using the device.
For more support please visit support.switch-bot.com
Package Contents
List of Components
Preparation
- Asmartphone or tablet using Bluetooth 4.2 or later.
- The latest version of our app, downloadable via the Apple App Store or Google Play Store.
- A SwitchBot account, you can register via our app or sign in to your account directly if you already have one.
- Afully charged SwitchBot Curtain.
Please note: If you intend to use Cloud Services for voice control, you will need a SwitchBot Hub Mini (sold separately).
https://apps.apple.com/cn/app/switchbot/id1087374760https://play.google.com/store/apps/details?id=com.theswitchbot.switchbot&hl=en
Check your Curtain Track
SwitchBot Curtain Rod 2 supports curtain track with the following
measurements: If SwitchBot Curtain Rod 2 does not work on your curtain track,
please contact:
support@wondertechlabs.com
Installation
Step 1: Add your Curtain to the SwitchBot app
Open the SwitchBot app and sign in to your account.
Tap “+” at the top right of the home page, find the Curtain icon and select,
then follow the instructions to add your Curtain.
Step 2: Install your Curtain on curtain track
-
Ring Top Curtains
1. Fully close your curtain, then remove the first curtain hook from the ring.
2. stretch the separate Hook arm and
attach it between the first and second ring onto the rod. 3. Attach another
Hook with the main unit onto your curtain track, then pull the separate Hook
downwards slightly and install it back to the main unit. You will hear a click
when itis firmly attached. 4. Adjust your Switc to the ground and indoors.
Then hang your curtain back in SwitchBot Curtain behind your fabric curchBot
Curtain to keep it perpendicular make sure the SwitchBot logo faces place and
hide tain. -
Grommet Curtains
1. Install your SwitchBot Curtain at the back of this type of curtain.
2. Stretch the separate Hook arm and
attach it between the first and second grommet onto the rod. 3. Attach another
Hook with the main unit onto your curtain track, then pull the separate Hook
downwards slightly and install it back to the main unit. You will hear a click
when itis firmly attached.
4. Adjust your Swi itchBot Curtain to keep it
perpendicular to the ground and make sure the SwitchBot logo faces indoors. 5.
Refer to the pictures below to install the beads fixer (with beads installed)
at the top of the grommets. Make sure that you clip them to the grommets
firmly. Finish by cutting the remaining beads or put it behind your
curtain.
-
Tab Top Curtains
Use the clips provided to help install your SwitchBot Curtain on tab top curtains. Close your curtain, attach a clip on the first tab. Attach the remaining clips on other tabs as shown on the picture. Beware that all other clips should be attached the opposite way against the first clip, make sure all the clips are sitting on the top of the rod and are aligned with each other.
1. Install your SwitchBot
Curtain at the back of this type of curtain. 2. stretch the separate Hook arm
and attach it between the first and second tab onto the rod.
3. Attach another Hook with the main unit onto your
curtain track, then pull the separate Hook downwards slightly and install it
back to the main unit. You will hear a click when it is firmly
attached.
5. Adjust your SwitchBot
Curtain to keep it perpendicular to the ground and make sure the SwitchBot
logo faces indoors.
-
Back Tab Curtains
Use the clips provided to help install your SwitchBot Curtain on back tab curtains. Close your curtain, attach a clip on the first tab.
Attach the remaining clips on other tabs as shown on the
picture.
Beware that all other clips
should be attached the opposite way against the first clip, make sure all the
clips are sitting on the top of the rod and are aligned with each
other.
-
Install your SwitchBot Curtain at the back of this type of curtain.
-
Stretch the separate Hook arm and attach it between the first and second tab onto the rod.
-
Attach another Hook with the main unit onto your curtain track, then pull the separate Hook downwards slightly and install it back to the main unit. You will hear a click when it is firmly attached.
-
Adjust your SwitchBot Curtain to keep it perpendicular to the ground and make sure the SwitchBot logo faces indoors.
How to Control Double-Sided Curtains
If you are using a double-sided curtain, we recommend you use two SwitchBot
Curtains to open your curtains from the middle. If you have only purchased 1
SwitchBot Curtain, you may use the dlips provided to join your curtains
together and turn them into a single-sided curtain.
Please note: Using just 1 SwitchBot Curtain to control a double-sided curtain
may affect user experience.
Step 3: Calibration
After you have added and installed your SwitchBot Curtain, you will need to
calibrate it to set its route on your curtain track. Please follow the
instructions in our app to make sure that the actual movement of your curtain
is the same as the animation in the app. You can choose to recalibrate the
Curtain or change its opening direction whenever you want by going to Curtain
Settings > Calibration.
Please note: You can group two SwitchBot Curtains via our app should you plan to open your curtains from the midde. Before you calibrate, please make sure the positions of your SwitchBot Curtains are the same as shown in our app.
Usage Methods
App Control
Open or close your curtain with just the tap of a button. We offer intuitive
app control for i0S and Android users, with weekly/ bi-weekly updates. OTA
firmware updates are also available to give you a better user experience.
Touch & Go
When SwitchBot Curtain senses you drawing your curtain for more than 5 cm, it
will automatically start and do the work for you. For a double-sided curtain,
you only need to pull one side of it to activate your Curtain.
Please note: You can turn off this feature on the Advanced Settings page of
the Curtain at any time.
5 cm lowers the possibilty of false triggers by foreign objects, pets, children, etc Voice Control and Home Automation
You can link multiple third-party services to your SwitchBot account to
control your SwitchBot Curtain or trigger Scenes using voice commands.
How to realize voice control and home automation:
- Connect your smartphone or tablet to the Internet.
- Set up a SwitchBot Hub Mini (sold separately).
- Turn on Cloud Services via SwitchBot Curtain’s Settings page.
- Link third-party services to your SwitchBot account.
Alexa, close the curtain.
Hey Google, close my bedroom curtain.
Hey Siri, open the living room curtain.
- Requires SwitchBot Hub Mini (sold separately)
Control with SwitchBot Remote (Sold Separately) Awireless remote to place anywhere.
You can also control your SwitchBot Curtain using a SwitchBot Remote. There are two buttons on the Remote and you can set an action for each via our app, for example, one button for fully opening and another for fully closing your Curtain.
One Remote can also control 2 SwitchBot Curtains that have been grouped. Please refer to the user manual of Remote for more information.
Setting
Light Sensor (Beta)
This allows you to set automations based on the illuminance level or the
relative intensity of sunlight around your device. This is a beta stage
function and is being upgraded continuously. You can find more details in
future app releases.
Delay
You can set 1 Delay for a countdown action. You can set the countdown time,
percentage of opening or closing, and Motion Mode.
Schedule
You can set up to 5 Schedules locally on your device, or unlimited Schedules
with a SwitchBot Hub. You can set the day, time, percentage of opening or
closing, and Motion Mode.
Charging, Firmware Upgrades, and Resetting Factory Settings
Charging
It takes about 6.5 hours to fully charge your device battery and this can last
for up to 8 months after one full charge.
You may also purchase our Solar Panel to charge using sunlight.
- A5V =1 Aadapter is required to charge your device.
- Battery life is tested under conditions of opeing and closing a 8 kg (17 Ibs) curtain on a 3-meter-long track once a day under 25 °C. Actual battery life may vary depending on different conditions.
- Charging with Solar Panel requires a level 6 illuminance level at least.
Firmware Upgrades
In order to improve user experience, we wil regularly release firmware updates
to introduce new functions and solve any software defects that may occur
during usage. When a new firmware version is available, we will send an
upgrade notification to your account via our app. When upgrading, please make
sure your product has sufficient battery and make sure your smartphone is
within range to prevent interference.
Resetting Factory Settings
Press and hold the Reset button for 15 seconds until the
indicator light lights up, then release the button.
Caution: You may lose all previous settings after factory reset and you
will need to add the device again and redo calibration. If you are using a
double-sided curtain, you will need to recalibrate both Curtains.
Specification
Model: W0701600
Color: White/Black
Material: ABS plastic with UV-resistant coating
Size (Main Unit): 42 x 51 x 110 mm (1.7 x 2 x 4.3 n.)
Weight (Main Unit):
135 g (4.8 0z)
Power: Type-C, DC 5V=1A,
3350 mAh lithium-ion battery or by Solar Panel’
Battery Life: 8 months? or unlimited with Solar Panel
Network Connectivity:
Bluetooth 5.0, long range transmission
Sensor: Accelerometer, light sensor
Strength: Supports curtain of up to 8 kg (17 Ibs)
(from controlled experiments in our lab)
Max Runway: 3 m (9.8 ft.)
Schedule: Up to 5, or unlimited with a SwitchBot Hub?
Voice Control (SwitchBot Hub Required): Amazon Alexa,
Google Assistant, Siri Shortcuts, SmartThings, IFTTT, and LINE CLOVA
Please note: Use your device under room temperature only.
- SwitchBort Solar Panel is old separately.
- Batere tested under conditions of opeing and closing a8 kg (17 1bs) curtain on a 3meterlong track once aday under 25 °C. Actual batery fe may. vary depending on diferent condiions.
- SwitchBot Hub Mini i sold separately
Warranty
We warrant to the original owner of the product that the product will be free from defects in materials and workmanship. Please note that this limited warranty does not cover:
- Products submitted beyond the original limited warranty period.
- Products on which repairs or modifying have been attempted.
- Products subjected to falls, extreme temperatures, water, or other operating conditions outside the product specifications.
- Damage due to natural disaster (including but not limited tolightning, flood, tornado, earthquake, or hurricane, etc.).
- Damage due to misuse, abuse, negligence or casualty (e.g. fire).
- Other damage that is not attributable to defects in the manufacture of product materials.
- Products purchased from unauthorized resellers.
- Consumable parts (including but not limited to batteries).
- Natural wear of the product.
Contact & Support
Setup and Troubleshooting: support.switch-bot.com
Support Email: support@wondertechlabs.com
Feedback: If you have any concerns or problems when using our products, please
send feedback via our app through the Profile > Feedback page.
Find Out More
Please visit support.switch-bot.com for more details.
https://play.google.com/store/apps/details?id=com.theswitchbot.switchbot&hl=en
CE/UKCA Warning
To comply with RF exposure requirements, a minimum separation distance of
20 cm must be maintained between the user’s body and the device, including the
antenna. Use only the supplied or an approved antenna. This device i in
compliance with the essential requirements and other relevant provisions of
directive 2014/53/EU. All essential radio test suites have been carried out.
CE DOC
Hereby, Woan Technology (shenzhen) Co. Ltd. declares that the radio ‘equipment
type W0701600 is in compliance with Directive 2014/53/EU. The fulltext of the
EU declaration of conformity s available at the following internet address:
support.switch-bot.com
UKCADOC
Hereby, Woan Technology (shenzhen) Co, Ltd. declares that the radio equipment
type WO701600 is in compliance with UK Radio Equipment Regulations (51
2017/1206).Tne fll text of the UK declaration o conformity is available at the
following internet address: supportswitch-bot.com
This product can be used in EU member states and UK.
Manufacturer: Woan Technology (shenzher) Co,, Ltd.
Address: Room 1101, Qiancheng Commercial Center, No.5 Haicheng Road, Mabu
Community, Xixiang Subdistrict, Bao’an District, Shenzhen, Guangdong, PRChina,
518100
Operation Frequency: Max RF output power
Bluetooth: 2402 MHz to 2480 MHz (-1.42 dBm)
FCC Warning
“This device complies with Part 15 of the FCC Rules. Operation s subect to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including Interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules, These limits are
designed to provide reasonable protection against harmful Interference in a
residential installation.
‘This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference wil not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged (o try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna,
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- – Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set orth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20 cm between the radiator and your body.
IC Warning
This device complies with CAN ICES-003 (BYNMB-003(8).
This device complies with Industry Canada licence-exempt RSS standardis).
‘Operation is subject to the following two conditions:
- this device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.
IC Radiation Exposure Statement
This equipment complies with the IC radiation exposure limits established for
uncontrolled environment. This equipment must be installed and operated at
least 20 cm from a radiator or your body.
www.switch-bot.com
V4.6-2208
Documents / Resources
|
SwitchBot W0701600 Curtain Smart Electric
Motor
[pdf] User Manual
W0701600 Curtain Smart Electric Motor, W0701600, Curtain Smart Electric Motor,
Smart Electric Motor, Electric Motor, Motor
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>