SONY CFI-2018AB PlayStation 5 Disc Edition Gaming Console User Guide

PlayStation®5
Safety Guide

Health and Safety

Before using this product, carefully read this manual and retain it for future reference.
Parents and guardians of children should read this manual and make sure that children follow all safety precautions.
This product has been designed with the highest concern for safety. However, any electrical device, if used improperly, has the potential for causing fire, electrical shock or personal injury. Observe all warnings, precautions, and instructions.
Stop use and disconnect the AC power cord immediately if the product functions in an abnormal manner, produces unusual sounds or smells or becomes too hot to touch.
WARNING
ELECTRICAL SHOCK
To avoid electrical shock, do not open the enclosure. Refer servicing to qualified personnel only.
LASER (Only for consoles with a disc drive installed)
This appliance is classified as a CLASS 1 LASER product under IEC60825-1:2014.
Caution
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
The use of optical instruments with this product will increase eye hazard.
MOVING FAN BLADES
Keep body parts away from fan blades.
PHOTOSENSITIVITY/EPILEPSY/SEIZURES
A very small percentage of individuals may experience epileptic seizures or blackouts when exposed to certain light patterns or flashing lights. Exposure to certain patterns or backgrounds on a television screen or when playing video games may trigger epileptic
seizures or blackouts in these individuals. These conditions may trigger previously undetected epileptic symptoms or seizures in persons who have no history of prior seizures or epilepsy. If you, or anyone in your family, has an epileptic condition or has had seizures of any kind, consult your physician before playing.
IMMEDIATELY DISCONTINUE USE and consult your physician before resuming gameplay if you or your child experience any of the following health problems or symptoms:
dizziness, altered vision, eye or muscle twitches, loss of awareness, disorientation, seizures, or any involuntary movement or convulsion.
RESUME GAMEPLAY ONLY ON APPROVAL OF YOUR PHYSICIAN.
Use and handling of video games to reduce the likelihood of a seizure

• Use in a well-lit area and keep as far away as possible from the television screen.
• Avoid large screen televisions. Use the smallest television screen available.
• Avoid prolonged use of the PlayStation®5 console . Take a 15-minute break during each hour of play.
• Avoid playing when you are tired or need sleep.

RADIO WAVES
Radio waves may affect electronic equipment or medical devices (for example, pacemakers), which may cause malfunctions and possible injuries

• If you use a pacemaker or other medical device, consult your doctor or the manufacturer of your medical device before using the wireless networking feature (Bluetooth® and wireless LAN)
• Do not use the wireless networking feature in the following locations:
  – Areas where wireless network use is prohibited, such as in hospitals. Abide by medical institution regulations when using the console on their premises.
  – Areas near fire alarms, automatic doors and other types of automated equipment.

MAGNETS AND MEDICAL DEVICES
These products have magnets which may interfere with pacemakers, defibrillators and programmable shunt valves or other medical devices. Do not place these products close to such medical devices or persons who use such medical devices. Consult your doctor before using these products if you use such medical devices.
VOLUME LEVEL
Permanent hearing loss may occur if headsets or headphones are used at high volume.
Set the volume to a safe level. Over time, increasingly loud audio may start to sound normal but can actually be damaging your hearing. If you experience ringing, discomfort in your ears or muffled speech, stop listening and have your hearing checked. The louder the volume, the sooner your hearing could be affected.
To protect your hearing:

• Limit the amount of time you use the headset or headphones at high volume.
• Avoid raising the volume to block out noisy surroundings.
• Lower the volume if you can’t hear people speaking near you.

LITHIUM-ION BATTERY
The controller contains a lithium-ion rechargeable battery. Do not handle damaged or leaking lithium-ion batteries. If the built-in battery fluid leaks, stop using the product immediately and contact technical support for assistance. If the material gets into the eyes, do not rub. immediately flush the eyes with clean water and seek medical attention. If the material comes into contact with the skin or clothes, immediately rinse the affected area with clean water and consult your doctor. Do not allow the battery to come into contact with fire or subject it to extreme temperatures such as in direct sunlight, in a vehicle exposed to the sun or near a heat source. Never attempt to open, crush, heat, or set fire to the controller or the battery. Do not leave the battery charging for a prolonged period of time when the controller is not in use.
YOUNG CHILDREN INJURIES
Keep the product out of the reach of young children. Young children may swallow small parts, pull on cables and cause the console or the controller to fall, or wrap the cables around themselves, which may inflict injury or cause an accident or a malfunction.
NEVER DISASSEMBLE OR MODIFY THE PRODUCT OR ACCESSORIES
There is a risk of fire, electric shack, or injury.
Precautions
Taking breaks

• Avoid prolonged continuous use of this product. Generally we recommend that you take 15-minute breaks for every hour of play.
• Avoid playing when you are tired or need sleep.
• Stop using the console immediately if you begin to feel tired or if you experience discomfort or pain in your hands or arms while operating the controller. If the condition persists, consult a doctor.
• If you experience any of the following health problems, discontinue use of the console immediately. If symptoms persist, consult with your doctor.
  – Dizziness, nausea, fatigue or symptoms similar to motion sickness
  – Discomfort or pain in a part of the body, such as eyes, ears, hands or arms

Vibration function

• If the controller is sitting on a flat surface, the vibration of the controller during gameplay may cause it to fall, leading to injury or malfunction.
• Do not use the vibration or trigger effect function if you have any ailment or injury to body parts such as the bones, joints, or muscles of the hand or arm or that may be affected by this vibration function. To disable the features, select Settings **** >Accessories from the home screen.

Static shock
When using the headset or headphones in particularly dry air conditions, you may sometimes experience a small and quick (static) shock on your ears. This is a result of static electricity accumulated in the body, and is not a malfunction of your headset or headphones. This effect could be reduced by wearing clothes made from materials that do not easily generate static shock.
Moisture condensation
tf the console is brought directly from a cold location to a warm one, moisture may condense inside the console. Should this occur, the console may not operate properly. In this case, turn off and unplug the console until the moisture evaporates (this may take several hours). tf the console still does not operate properly, contact Customer Service Hotline.
High temperature message
If the console becomes too hot, you will see a notification message on your screen. Continued use while the message displays may lead to the console becoming non-operational. If you see the message, turn off the console and wait until it cools down. After the console cools down, move it to a well- ventilated location that is not subject to high temperatures. Check to make sure the console vents are not blocked, and if you installed an M.2 SSD to the console, be sure that the heat-dissipation parts haven’t detached from the M.2 SSD. See “Install an M.2 SSD° (page 8) for more information on heat- dissipation parts.
Motion sensor
When using the motion sensor function of the controller, be cautious of the following points. If the controller hits a person or object, it may cause accidental injury or damage.

• Before using the motion sensor function, make sure you have enough space to move around.
• Firmly grip the controller to prevent it from slipping out of your grasp and causing damage or injury.
• If using a controller that is connected to the PS5® console with a USB cable, make sure there is enough space for the cable so that the cable will not hit a person or object.

Light bar
Do not stare at the light bar on the controller when it is blinking. Stop using the controller immediately if you experience any discomfort or pain.
Liquid, dust, smoke, steam, and heat

• Always ensure the product and its connectors are free of liquid, excess dust and small particles.
• Do not leave the product in the following areas during use, storage, or transportation.
  – Areas exposed to smoke or steam
  – Areas with high humidity, dust, or cigarette smoke
  – Areas near heating appliances, areas exposed to direct sunlight, or areas that retain heat

AC power cord and cables

• Do not use the cord or cables if they are damaged or modified.
• Do not use a power cord other than the included AC power cord. The AC power cord is designed specifically for use with this console only, and should not be used with other electrical devices.
• Do not touch the plug or connector with wet hands.
• Do not walk on the cord or cables or pinch them, particularly at plugs, receptacles, connectors and where they exit from the console.
• Do not expose the cord or cables to heat or place them near heating appliances.
• Do not place heavy items on the cord or cables.
• Do not pull or bend the cord or cables with excessive force.
• Do not connect the AC power cord to a voltage transformer or inverter. Connecting the card to a voltage transformer for overseas travel or an inverter for use in a vehicle may cause it to heat up in the console and may cause burns or a malfunction.
• Before connecting or plugging in the AC power cord, check that there is no dust or small particles in or on the plug or connectors or the AC IN connector on the console.
  « Unplug the cord and cables if you want to clean or move your console or do not intend to use it for an extended period of time. When disconnecting, hald the cord by the plug and pull straight out of the socket. Never pull by the cord and do not pull out at an angle.

Set up and handling

• Do not use the console in a closed cabinet or other locations where heat may build up. Doing so may cause the console to overheat and may lead to fire, injury or malfunction.
• Any TV of component connected to the console must be functioning properly and free of defects. If a TV or component connected to the console is faulty or defective, it may cause damage to the TV or component, or to the console itself. As with all electrical products, connection to faulty or defective components, or the failure to connect to a properly wired outlet, may cause sparking and pose a fire hazard.
• Do not touch the console or connected cables or accessories during an electrical storm.
• Do not expose the console, accessories or battery to high temperatures, high humidity or direct sunlight during operation, transportation and storage.
• Do not place the console or accessories on surfaces that are unstable, tilted or subject  to vibration.
• Use the included horizontal stand feet to set the console in the horizontal position. If you do not use the feet and set the console in a position other than instructed, there is a risk of injury, damage, or malfunction. For instructions on attaching the feet, please see the Quick Start Guide. To set the cansole in the vertical position, you’ll need to use the vertical stand (sold separately).
• When setting up or carrying the console, be careful to securely hald the main body of the console. Do not hold, carry, or lift the console by only the cover; doing so could cause the cover to detach and the console to fall, leading to potential injury or damage.
• Do not move the console or adjust its position when the power indicator is lit or blinking. Data may be lost or corrupted, or the console may be damaged.
• Do not stand on or put objects on the console, and do not stack the console with othe devices.
• Do not place the console and connected accessories on the floor or in a place where they may cause someone to trip or stumble.
• Do not allow bodily contact with the console or air from the console vents for an extended period of time while in use. Extended contact under these conditions may cause low-temperature burns.

Power off

• Do not turn off the console while data is being saved on or loaded from the SSD or USB drives.
• Do not remove the AC power cord from the electrical outlet until the power indicator has turned off. If you disconnect the AC power cord while the power indicator is lit or blinking, data may be lost or corrupted, or the console may be damaged.

Use of the cover
Do not use the console without the cover. Doing so may cause fire, electrical shock, or Malfunction. Do not remove the cover of the console immediately after use. The main unit of your PS5 console may still be hot immediately after use, and continued handling with the cover off may cause burns. If you need to remove the cover, turn off your PSS console, unplug the AC power cord and cables, and wait for it to cool down.
Compatibility

Controllers intended for use with PlayStation®, PlayStation®2, and PlayStation®3 consoles such as the analog controllers (DUALSHOCK® and DUALSHOCK®2) and the DUALSHOCK®: wireless controller, are not compatible with the PS5 console. The DUALSHOCK*4 wireless controller is compatible with PlayStation®4 format software on the PSS console, but not with PSS format software on the PSS console.
Safe use for children
Parents are encouraged to monitor children in online activities to ensure safe and responsible internet usage.

Remove and attach covers

Remove the covers when performing maintenance on your console, or when installing an M- 2 SSD or disc drive.
Safety warnings
Before removing or attaching the covers, please read the following safety precautions.
Caution

• Keep out of reach of young children. Young children may swallow small parts which  may inflict injury.
• After you have turned off your PS5 console and unplugged the AC power cord and cables, wait for your console to cool down before removing and attaching the covers. The main unit of your PSS console may still be hot immediately after use, and continued handling of your console may cause burns.
• Be careful not to pinch your fingers in the gaps between parts, and not to hurt your hands and fingers on the comer of parts.
• When turning on your console, make sure the covers are installed correctly. If the covers are not installed correctly, it may cause the main unit to overheat.

Remove and attach covers
Place your console on a soft cloth spread over a flat surface before removing or attaching the covers.
Illustrations show the console with disc drive installed.

• Each cover has different shapes.
  To ensure you attach the cover in the correct position, use the marks on the inside of the cover as a guide (see illustration on the right).
  

• All covers can be removed and attached in the same way.

1. Go to the control center and select Power > Turn Off PSS.
   The screen goes blank, the power indicator flashes white, and then turns off.

2. Remove the AC power cord and cables, and then wait for the PS5 console to cool down.
   The main unit of your console may be hot immediately after use.

3. Place the console with the bottom facing up and the front side facing you, and then remove the feet.

4. Remove the cover.
   Slightly lift the cover away from the console to detach its clips and remove it.
   

5. Attach the cover.
   Align the cover’s clips with the corresponding holes on the console and push in until you hear a “click”.
   

6. Attach the feet, connect the AC power cord and cables, and then turn on the power.

Install an M.2 SSD

M.2 SSD is storage that uses flash memory-  Install a commercially available M.2 SSD in your PS5 console for more storage for your game and app data.
Types of M.2 SSD
You can use an M.2 SSD with the following specifications:

Length: 30/42/60/80/110 mm
Thickness: up to 11.25 mm (up to 8.0 mm from above the board, up to 2.45 mm from below the board)

Notices

• Both single-sided devices and double-sided devices are supported.
• M.2 SATA SSD is not supported.
• Allocation of host memory to HMB (Host Memory Buffer) supported devices is not supported.
• Carefully review drive specifications prior to purchase and contact the vendor or manufacturer if you need further information. SIE cannot guarantee that all M.2 SSD devices meeting the specifications above will work with your console and assumes no responsibility for the selection, performance or use of third-party products.

About M.2 SSD heat-dissipation
The M.2 SSD that can be used with this device has a fast transfer speed and is therefore subject to reaching high temperatures. If the M.2 SSD does not include a heat-dissipation mechanism, attach a heat conductor, such as a heat sink, a heat transfer sheet, or both.
For information on how to attach the heat conductor, refer to its manual. If you use your device without heat-dissipation parts, or the heat-dissipation parts come off during use, the M.2 SSD may overheat, and continued use may cause operation failure.

Install or remove an M.2 SSD
Safety warnings
Before installing or removing an M.2 SSD, please read the following safety precautions.
Caution

• Keep out of reach of young children. Young children may swallow small parts which may inflict injury.
• When turning on your console, make sure the cover and expansion slot cover are installed correctly. If the cover and expansion slot cover are not installed correctly, it may cause the main unit to overheat.

Notices

• Before proceeding with the installing or removing process, touch a metal-grounded object to remove any static electricity from your body. Failure to do so may cause damage to an M.2 SSD or PS5 console. In particular, an M.2 SSD uses parts sensitive to static electricity, so please use caution.
• Do not touch the terminal of an M.2 SSD or your PS5 console’s expansion connector.
• When attaching or removing screws, use a screwdriver that matches the sizes of the screws. If the sizes do not match, the screw may become stripped.
• Be careful not to drop small parts such as screws and spacers in the main unit of your PS5 console. If small parts do fall in the main unit, do not turn on the power, and instead consult the support website (back cover).

Install an M.2 SSD
Place your console on a soft cloth spread over a flat surface before installing the M.2 SSD.

1. Remove the   cover (page 7).
   For safety warnings or details about removing or attaching covers, see “Remove and attach covers”.
   (Console with the disc drive installed)

2. Remove the screw from the expansion slot cover and then remove the cover.

3. Remove the screw and spacer, and then adjust the spacer to the size of the M.2 SSD.

4. Holding the edge of the M.2 SSD, align it with the notch on the expansion connector. Tilt the M.2 SSD diagonally upward, and firmly insert it all the way into the expansion connector.
   The following shows an M.2 SSD with a heat sink and heat transfer sheet attached.

5. Tilt the M.2 SSD down and fasten it with the screw.

6. Attach the expansion slot cover and fasten the screw.

7. Attach the cover (page 7).

8. Attach the feet, connect the AC power cord and cables, and then turn on the power.
   When your PS5 console turns on, the formatting guide appears. Follow the onscreen instructions and format the M.2 SSD.

• Consult our support website if you lose parts such as the expansion slot cover, screws, and spacers (back cover).
• For information about how to save your game data on M.2 SSD storage and the types of data you can save, see the User’s Guide (back cover).

Remove an M.2 SS
Place your console on a soft cloth spread over a flat surface. You can then remove the M.2 SSD.

1. Remove the cover (page 7).
2. Remove the screw from the expansion slot cover, and then remove the cover.
3. Remove the fastened M.2 SSD screw.
4. Slightly lift up the M.2 SSD, and then hold the edge and pull diagonally upward.
5. Fasten the screw back on the spacer.
6. Attach the expansion slot cover and fasten the screw.
7. Attach the cover (page 7).

Attach or remove the disc drive

If you have purchased a console without a disc drive installed, attach the disc drive (sold separately) to play disc-based games, Blu-ray Discs™ and DVDs.
Caution
Before attaching or removing the disc drive, please read the following safety precautions.
Notices

• Before attaching or removing the disc drive, touch a metal-grounded object to remove any static electricity from your body . Failure to do so may cause damage to the disc drive or PS5 console.
• Do not touch the terminal of your disc drive or your PS5 console’s corresponding terminal.

Attach the disc drive
Place your console on a soft cloth spread over a flat surface before attaching your disc drive.

1. Remove the cover (page 7).
   For safety warnings or details about removing or attaching covers, see “Remove and attach covers”.![SONY CFI-2018AB PlayStation 5 Disc Edition Gaming Console

• covers 6](https://manuals.plus/wp-content/uploads/2023/11/SONY-CFI-2018AB- PlayStation-5-Disc-Edition-Gaming-Console-covers-6.jpg)

  2. Align the disc drive’s clips with the 2 holes (marked with ), and then firmly push in until you hear a “click”.

  3. Attach the cover (page 7).
     Make sure to attach the cover for consoles with the disc drive installed.

  4. Attach the feet, connect the AC power cord and cables, and then turn on the power.
     Make sure to attach the feet for consoles with the disc drive installed.

Remove the disc drive
Place your console on a soft cloth spread over a flat surface before removing your disc drive.

1. Remove the cover (page 7).
   For safety warnings or details about removing or attaching covers, see “Remove and attach covers”.

2. Use your finger to lift up the concave part of the disc drive and remove it.

3. Attach the cover (page 7).
   Make sure to attach the cover for consoles without a disc drive installed.

4. Attach the feet, connect the AC power cord and cables, and then turn on the power.
   Make sure to attach the feet for consoles without a disc drive installed.

When disposing of the controller
The lithium-ion battery of the controller is recyclable. When disposing of the controller, remove the battery and follow local regulations regarding disposing of batteries.
Caution

• Remove the battery in a location out of the reach of small children to help prevent accidental swallowing of small parts such as the screws.
• Be careful not to hurt your nails or fingers when removing the controller casing.
• For safety reasons, attach tape or a seal on the metal part of the battery before disposing.

Notice
Other than when disposing of the controller, never remove the screws and never remove the battery from the controller.

1. Disconnect the USB cable from the controller.
2. Remove the cover on the front of the controller.
3. Using a tool such as a screwdriver, remove the L1 and R1 buttons.
4. Using a crosshead screwdriver, remove the screws (4 places).
5. Using a tool such as a screwdriver, remove the cover clips (1 ), and then remove the cover ( 2 ).
6. After disconnecting the connector, remove the battery.

Use and handling

Never disassemble or modify the console or accessories
Use the console and accessories according to the instructions in the product documentation. No authorization for the analysis or modification of the console or accessories, or the analysis and use of its circurt configurations, is provided. Unauthorized
Modification of the console or accessories will void your warranty. There are no user serviceable components inside the console.
Additionally, there is a risk of exposure to laser radiation as well as to electrical shock.

Network

• A broadband connection is required to access the internet. Note that dial-up connectivity is not supported.
• You are responsible for internet service fees. For details, refer to the information provided in your service contract or contact your internet service provider.
• Do not use a cord for a standard residential telephone line or cables of types other than those mentioned here. Using the wrong type of cord or cable can cause more electrical current than necessary to flow through the LAN port, which may lead to heat build-up, fire or malfunction.

Wireless networking feature

• The frequencies used by the wireless networking feature of this product are the 2.4 GHz (WLAN, Bluetooth®}/5 GHz (WLAN) ranges. The 2.4 GHz range of radio waves is shared by various devices. This product has been designed to minimize the effect of other devices using the same range. However, in some cases, interference from other devices may reduce the connection speed, shorten the signal range, or cause the connection to be terminated unexpectedly.
• When using the console scan function to select a wireless LAN access point, access points that are not intended for public use may be displayed. Only connect to an access point that you are authorized to use.

Handling the controller

• Charge in an environment where the temperature range is between 10 °C and 30 °C. Charging may not be as effective when performed in other environments.
• The battery has a limited lifespan. Battery duration will gradually decrease with repeated usage and age. Battery life also varies depending on the storage method, usage state, environment and other factors.
• When the controller is not used for an extended period of time, it is recommended that you fully charge it at least once a year in order to maintain battery functionality.

Care instructions

For safety, be sure to unplug the AC power cord from the electrical outlet when you care for your console.
Cabinet (the plastic parts of the console and controller)

• Wipe down with a soft, dry cloth.
• To prevent the surface of your console or peripherals from changing color and quality, follow the guidelines below.
  – Do not spray with or apply insecticides or volatile substances, including paint thinner, benzene, or alcohol. Do not wipe with chemically treated cloths.
  – Do not rest or store your controller or headset on top of your console.

Vents

• Do not block any vents. To maintain good ventilation, follow the guidelines below:
• Place the console at least 10 cm away from a wall surface.
• Do not place on a carpet or rug with long fibers.
• Do not place in a narrow or cramped space.
• Do not cover with cloth.
• Do not allow dust to build up on the vents. Use a cleaning tool such as a handheld vacuum cleaner to remove dust buildup.
  It is also recommended to remove the covers, and then use a handheld vacuum cleaner to remove the dust trapped underneath. For details on covers, see “Remove and attach covers” (page 7).

Ports/connectors
Do not use ports/connectors on the console if they are dirty. They may not conduct electricity properly. When they are dirty, wipe them with a dry cloth.
Disc handling (Only for consoles with a disc drive installed)

• Do not touch the playable side of the disc with your hand when holding the disc. If the disc gets dirty from fingerprints or dust, it may cause distorted images or decreased sound quality.
• Do not expose the disc to high temperatures, high humidity, or direct sunlight.
• If you are not using the disc for an extended period of time, store it in its case.
• Use a soft cloth to lightly wipe the disc from the center to the outer edges.
• Do not use substances such as benzene, paint thinner, record cleaner, or anti-static spray because it may damage the disc.

End of life product recycling
The product is made of many materials that may be recycled. The controller contains a lithium-ion battery. Follow local regulations when disposing of the product.

Specifications

Design and specifications are subject to change without notice.
Depending on the software version in use, the console may operate differently than described in this manual.
PlayStation®5 console

| Console with the disc drive installed| Console without a disc drive installed
---|---|---
Main Processor| Single-chip custom processor
CPU: x86-64-AMD Ryzentm “Zenr, 8 cores/16 threads GPU: 10 TFLOPS, AMD Radeon” RDNA-based graphics engine
Memory| GDDR6 16 GB
Storage| 1 TB Custom SSD”
Input/output”| USB Type-A port (SuperSpeed USI310Gbps) x2 USB Type-C4 port (Hi-Speed USB)
USB Type-C port (SuperSpeed USB 10Gbps) Expansion connector (Key M)
Disc drive port
Networking| Ethernet (10BASE-T,100BASE-TX,1000BASE-T) IEEE 80211 a/b/g/n/ac/ax
Bluetoothil 51
AV output| HDMI”, OUT port”‘
Electrical rating| 110/220-240 V -.3.2/1.65 A 50/60 Hi’
Maximum rated power| 350 W
External dimensions (excluding projecting parts)| Approx. 358 x 96 x 216 mm (width x height x depth)| Approx. 358 x 80 x 216 mm (width x height x depth)
Mass| Approx. 3.2 kg| Approx. 2.6 kg
Operating temperature| 5 °C to 35 °C

1. SSD capacity calculated using base 10 mathematics (1GB =1,000,000,000 bytes).
2. A portion of the SSD capacity is reserved for use in connection with console administration, maintenance, and additional options. This may occur upon installation of system software or other software. As a result, the availability of SSD capacity may vary depending on the console, system software version, or available options, and is not otherwise available for your use.
3. Functionality of all connected devices is not guaranteed.
4. Use the included I-IDMI cable.
5. Varies depending on the country or region.

DualSenseTM wireless controller

Disc drive (Only for consoles with a disc drive installed)

Playable discs| PlayStation®5 format Ultra HD Blu-ray™ 1
Compatible PlayStation®4 format Blu-ray™ 2
Ultra HD Blu-ray™
BD-ROM
BD-R
BD-RE *3
DVD-ROM
DVD+R/RW
DVD-R/RW
AVCHD
---|---
Optical drive (read-only)| BD-ROM (66 GB/100 GB) ~10×CAV
BD-ROM (25 GB/50 GB) ~8×CAV
BD-R/RE (25 GB/50 GB) ~8×CAV
DVD ~3.2×CLV
Laser| Type: Semiconductor,continuous
BD
Wavelength: 395–415 nm
Power: Max. 1 mW
DVD
Wavelength: 640–675 nm
Power: Max. 1 mW

1. PlayStationg format software, PlayStationg2 format software, and PlayStationg3 format software cannot be played from a disc.
2. Some functionalities available on the P54″‘ console may be absent when played on a PS5 console. Your PS5 console may need to be updated to the latest system software. Internet connection required.
3. Playback of BD-RE ver.1.0 discs is not supported.

Region codes
Depending on the disc, a region code that is based on the geographic region where the disc is distributed may be assigned. The DVD region code is set to the code of the DVD played for the first time. The region codes set on the console are as follows.

| Region code
---|---
Blu-ray Disc™ (BD)|
PlayStation®4 format Blu-ray™|

Notices

• You can change the BD/DVD region code of your console to the disc played. You can change the region code up to four times.
• DVD discs that have not been finalized cannot be played.
• Do not use the following discs. If you do, the console may be damaged.
• 8cm discs
• Non-circular discs, such as discs in the shape of a card, star, or heart
• Discs that are cracked or deformed, or discs that have been repaired
• Discs with paper or stickers on them
• A DualDisc features one side that conforms to the DVD standard, and another side with audio only. The audio-only side cannot be played on the console.
• When playing discs with content that was copied fraudulently, abnormal sounds may be produced or the content may not play correctly.
• For continuous playback of copyright-protected BDs, the encryption key for AACS (Advanced Access Content System) may need to be renewed. The encryption key is automatically renewed if the console is connected to the internet.
• Some discs may not be playable due to scratches, dust, the quality of recording, or the characteristics of the recording device.
• In rare instances, BD and DVD may not operate properly when played on the console. This is primarily due to variations in the manufacturing process or encoding of the software.

System software
By updating the system software of the console, you can enjoy additional features, improved usability, and enhanced security. Always update to the latest version.

• If you cannot update over the internet, you can use a game disc or USB drive instead.
  For details, visit playstation.com/help/.

• The system software included within this product is subject to a limited license from Sony Interactive Entertainment Inc.
  Refer to https://doc.dl.playstation.net/doc/ps5-eula/ for further details.

HARDWARE WARRANTY

For warranty terms and conditions of respective regions, please refer to the “Support”page of the official website https://playstation.com/help/, or call our Customer Service Hotline (back cover).

Compliance information
PS5 console and wireless controller compliance with IMDA standards
Complies with IMDA Standards DB102988

Copyright and trademarks

”, “PlayStation”, “ ”, “PS5”, “PS4”, “DualSense” and “DUALSHOCK” are registered trademarks or trademarks of Sony Interactive Entertainment Inc.
“SONY” and “ ” are registered trademarks or trademarks of Sony Group Corporation.
AMD, Radeon and Ryzen are trademarks of Advanced Micro Devices, Inc.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Interactive Entertainment Inc. is under license.
Other trademarks and trade names are those of their respective owners.
“Blu-ray Disc™”, “Blu-ray™” and “Ultra HD Blu-ray™” are trademarks of the Blu- ray Disc Association.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
USB-IF SuperSpeed USB Trident logo is a registered trademark of USB Implementers Forum, Inc.
USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.
All other trademarks are the property of their respective owners.

Quick Start Guide
Learn how to set up your PS5 console and how to use basic functions in the included Quick Start Guide.
User’s Guide
Find out about everything your PS5 console can do. Learn how to configure settings and how to use each function. To see the User’s Guide, you’ll need an internet connection.
From your PS5 console’s home screen, go to Settings ** > User’s Guide, Health & Safety, and Other Information > User’s Guide.
Customer Support Website
Find online support information such as step by step troubleshooting and frequently asked questions by visiting playstation.com/help/.
Customer Service Hotline**
Mon-Sat: 10:00-19:00
Hong Kong: +852 5814 0155
Singapore: +65 6347 5988

© 2023 Sony Interactive Entertainment Inc. Printed in China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>