ZELMER ZFS0916 Meat Slicer User Manual
- June 14, 2024
- zelmer
Table of Contents
ZELMER ZFS0916 Meat Slicer User Manual
WARNING
Please read the instructions for use carefully prior to using the product. store these in a safe place for future reference.
DESCRIPTION
- Main Body
- Safety Button
- On/Off Button
- Thickness Guide
- Food tray
- Food pusher
- Stone coating blade
- Platform
- Dial for thickness adjustment
- Sliding Platform
SAFETY INSTRUCTIONS
Check that your mains voltage corresponds to that stated on the appliance.
From time to time check the cord for damages. Never used the appliance if cord or appliance shows any signs of damage.
Only use the appliance for domestic purposes and in the way indicated in these instructions.
Never immerse the appliance in water or any other liquid for any reason whatsoever. Never place it into thedishwasher.
Never use the appliance near hot surfaces.
If the supply cord is damaged it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.
All repairs should be made by a competent qualified electrician.
Never use the appliance outside and always place it in a dry environment.
Never use accessories which are not recommended by the producer. They could constitute a danger to the user and risk to damage the appliance.
Never move the appliance by pulling the cord. Mark sure the cord cannot get caught in any way. Do not wind the cord around the appliance and do not bend it.
Mark sure the appliance is set on a flat surface.
Unplug the appliance when not in use. Only use this slicer for cooking applications. Only cut articles such as cheese, meat, bread and preparations.
Never cut frozen food with this slicer.
Never cut food only by using your hands, always use the slide and its food guide unless it is impossible because of the size of the article. Make sure never to touch the knife.
This kind of appliance cannot function continuously; it is not a professional type of appliance. It is necessary to make temporary stops.
The blade of the appliance is extremely sharp, always be careful when cleaning the appliance. It is absolutely necessary to keep this appliance clean at all times as it comes into direct contact with food.
Never touch the blade when the appliance is in use. Furthermore, never try to stop the movement of the blade in any way whatsoever.
Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.
This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
Children shall not play with the appliance.
This device is designed for use at a maximum altitude up to 2000m above sea level.
IMPORTANT WARNINGS
Any other servicing should be performed by an authorized service
representative.
This appliance is not for professional use. You should follow the requested
breaks. Failure to follow this instruction carefully may result in damage to
the motor. Please refer to the rating label for the maximum continuous usage
timer (KB/MAX. 3 minutes where 3 is maximum usage time).
The breaks should last at least 3 minutes.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard
B &B Trends S.L. disclaims all liability for damages that may occur to people, animals or objects, for the non-observance of these warnings.
BEFORE USE
Clean all parts that come into contact with food before using the appliance before the first time (or after prolonged storage)
USE
IMPORTANT: After 3 minutes of continuous use it needs to rest for 10 minutes. After 5 cycles, it needs to rest for half an hour
Place the appliance on a flat and dry surface. The person using the appliance should operate the buttons with the right hand and the food pusher with the left hand. Plug the appliance into the mains.
Unfold the platform (9). Place the piece holder (7) on the sliding table (6). Insert the sliding table (6) in the platform (9).
Move the sliding table (6) back and forth a few times to ensure proper movement.
Select the required slice thickness from 0-15mm.Turn the dial (10) clockwise for thicker slices or counterclockwise for thinner slices.
Place the food to be sliced on the sliding table, and press it lightly against the thickness guide (5) using the piece holder.
Press and hold the safety button (3), and press the on/off button (2). The blade starts rotating.
Move the sliding table back and forth to slice the food. Always keep your left hand’s fingers to the left of the piece holder
TIPS
To slice meats wafer thin, chill thoroughly for 2-4 hours in freezer before slicing.
When slicing warm boneless roasts, remove from oven and let set 15 to 20 minutes before slicing.
Cold cuts keep longer and retain flavor if sliced as needed.
Foods with an uneven texture-like fish and thin steaks- are often difficult to slice. Partially freeze before slicing.
The appliance can also slice e.g. carrots or potatoes in thin slices for chip
MAINTENANCE AND CLEANING
Before cleaning, always unplug the appliance.
Wipe the inside and outside of the appliance with a paper towel or a soft cloth. It should not be washed in a dishwasher.
Do not clean the inside or outside with any abrasive scouring pad or steel wool as this will damage the finish.
Do not immerse in water or any other liquid.
The blade can be taken off by turning the blade-locking knob.
Caution: the blade is very sharp. After having cleaned the blade, turn the knob anti-clockwise to lock the blade.
Dry all parts well before storage
PRODUCT DISPOSAL
This product complies with European Directive 2012/19/EU on electrical and electronic devices, known as WEEE (Waste Electrical and Electronic Equipment), provides the legal framework applicable in the European Union for the disposal and reuse of waste electronic and electrical devices. Do not dispose of this product in the bin, instead going to the electrical and electronic waste collection centre closest to your home.
WARRANTY REPORT
B&B TRENDS, S.L. guarantees compliance of this product for the use for which it is intended for a period of two years. In the case of breakdown during the term of this warranty, users are entitled to repair or else the replacement of the product at no charge if the former is unavailable, unless one of these options proves impossible to fulfill or is disproportionate. In this case, you can then opt for a reduction in price or cancellation of the sale, which must be dealt with directly with the sales vendor. This also covers replacement of spare parts provided that the product has been used according to the recommendations specified in this manual for both cases, and has not been tampered with by any third party that is not authorised by B&B TRENDS, S.L. The warranty will not cover any parts subject to wear and tear. This warranty does not affect your rights as a consumer in accordance with the provisions in Directive 1999/44/EC for member states of the European Union.
USE OF WARRANTY
Customers must contact a B&B TRENDS, S.L. authorised Technical Service for repair of the product. Since any tampering of the same by anyone not authorised by B&B TRENDS, S.L., or the careless or improper use of the same shall render this warranty null and void. The warranty must be fully completed and delivered along with the receipt or delivery docket for the effective exercise of rights under this warranty.
This warranty should be retained by the user as well as the invoice, receipt or the delivery docket to facilitate the exercise of these rights. For technical service and after-sales care outside the Polish territory, please submit your query to the point of sale where you purchased the item or check for further aftersales information at www.zelmer.com
Мясорезка / Скиборізка для м’яса
SERIES: ZFS
MOD: ZFS0916 / ZFS0916S / ZFS0916B / ZFS0917
220-240V~ 50/60Hz 150W
Type: GTM-8636
Made in China / Cделано в Китае / Зроблено в Китаї
B&B TRENDS, S.L.
C. Cataluña, 24 · P.I. Ca N’Oller
08130 Santa Perpètua de Mogoda
(Barcelona) · SPAIN
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>