Arespark Showercombov Shower Head with Hose User Manual

Arespark Showercombov Shower Head with Hose User Manual

Package Content

• Shower Head

• Shower Hose

• Shower Bracket

• Teflon Tape (Only 1 is required for installation)

• Rubber Seal *4 (Only 3 are required for installation)

Installation Steps

1. If a shower head was previously installed, remove the old shower head first.

2. Apply Teflon Tape to Shower Arm.

3. Attach the Shower Bracket to the shower  arm by turning clockwise by hand.
   Then lightly tighten with a wrench.
   (This Rubber Seal already Installed inside)
   *If you have a wrench, put a cloth over the pipe and give it a slight twist. (Overtightening may damage it.)

4. Add Rubber Seals to both sides of the shower hose.

5. Connect Shower Hose HEX NUT to Shower Bracket. Connect Shower Hose CONICAL NUT to Handheld Shower.
   (Note: Please do not reverse the connections at both ends of the hose. Under normal circumstances, some bracket threads may be exposed.)
   Shower Arm and Wrench not included.
   (HEX HUT mean: One end of hose is a hex nut. Compare the other end, it looks flatter and shorter)
   (CONICAL NUT mean: One end of hose is a conical nut. Compared to the other end, this one looks longer and looks like it’s made of two parts

6. Double-Check the Installation Make sure all the connection nuts are tight- ened, hold the whole bracket by hand and rotate the ball joint to adjust the angle you need. Then turn on the main water supply and check for leaks.
   (Note: If there is a water leak, please check that you have followed the steps and com- pleted the installation according to the in- structions.)

Reinstall Bracket

1. First unscrew the cylindrical ring from the other part of the bracket.

2. Take out the brass swivel ball joint..

3. Flatten the white O-ring with your hands and stick it to the mouth of the cy lindrical ring.

4. Put the brass swivel ball joint into the cylinder ring. Then screw the other part of the bracket to the cylinder ring

FAQ

Q1: Why does the shower keep falling down and not fixed on the bracket?

Q2: There is a rattling sound inside the shower head. Is it normal or is

there something wrong with the shower head?

Q3: Why does it leak?

A3: If there is leakage, it may be improper installation. The solution is as follows. a.) If the hose leaks, put washers in both ends of the hose to prevent leaks. b.) If the shower arm is leaking, it may be due to the short threads on the shower arm. Put the spare washer on the mesh washer of the bracket nut to prevent water leakage. c.) If the bracket is leaking, it may be because the white plastic open O-ring of the bracket has loosened during long- term transportation, and you need to follow the steps below to reinstall the bracket.

Warranty & Package Included

• 12-MONTH Worry Free Warranty
• Lifetime Friendly Customer Service

If you have any questions or concerns, such as ‘Incom- plete Accessories’, ‘Installation Issue’ Don’t hesitate to contact us directly on Amazon. ‘Con- tact Seller’ button on your order.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>