falmec Polar X Isola Hood 35 cm Stainless Steel Instructions

falmec Polar X Isola Hood 35 cm Stainless Steel

Product Information

• Design: Polar
• Color: Black/White/X
• Model: Polar Light
• Weight: 24 Kg (Isola/Island), 23 Kg (Parete/Wall)
• Dimensions: 316 diameter of fixing holes, 152.6 x 111.7 x 40.9 mm (Isola/Island), 218 x 114.4 x 40.9 mm (Parete/Wall)
• LED Light: 8×6 cm, 830 Min – 1227 Max

Product Usage Instructions

• Installation
  • Step 1: Check valve installation (5)
  • Step 2: Hood fastening (6-7-8-9)
  • Step 3: Remove metal filters (A) and assemble active carbon filters (B) for Isola/Island or Parete/Wall models
  • Step 4: Make electrical connections (C)
• Measurements for Installation
  • For Isola/Island: X = Min 600mm
  • For Parete/Wall: X = Min 520mm
• Optional Accessories
  • V3: Additional accessory for installation
• Specifications
  • Weight: Isola/Island: 24 Kg, Parete/Wall: 23 Kg
  • Dimensions: Isola/Island: 152.6 x 111.7 x 40.9 mm, Parete/Wall: 218 x 114.4 x 40.9 mm
  • LED Light Dimensions: 8×6 cm
  • LED Light Range: 830 Min – 1227 Max
• Frequently Asked Questions (FAQ)
  • What is the weight of the Isola/Island model? The weight of the Isola/Island model is 24 Kg.
  • What are the dimensions of the Parete/Wall model? The dimensions of the Parete/Wall model are 218 x 114.4 x 40.9 mm.
  • Can I use active carbon filters with the Isola/Island model? Yes, you can remove the metal filters and assemble active carbon filters (B) for the Isola/Island model.
  • What is the range of the LED light? The LED light has a range of 830 Min – 1227 Max.

DIMENSION

WHAT IS IN THE BOX

TOOLS REQUIRED

INSTALLATION INSTRUCTION

OPTIONAL

SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS AND WARNINGS

• Installation operations are to be carried out by skilled and qualified installers by the instructions in this booklet and in compliance with the regulations in force.
• DO NOT use the hood if the power supply cable or other components are damaged: disconnect the hood from the electrical power supply and contact the Dealer or an authorized Servicing Dealer for repairs.
• Do not modify the electrical, mechanical, or functional structure of the equipment.
• Do not personally try to carry out repairs or replacements.
• Interventions carried out by incompetent and unauthorized persons can cause serious damage to the unit or physical and personal harm, not covered by the Manufacturer’s warranty.
• WARNINGS FOR THE INSTALLER

TECHNICAL SAFETY

• Before installing the hood, check the integrity and function of each part. Should anomalies be noted, do not proceed with installation and contact the Dealer.
• Do NOT install the hood if an aesthetic (or cosmetic) defect has been detected. Put it back into its original package and contact the dealer.
• No claim can be made for aesthetic (or cosmetic) defects once it has been installed.
• During installation, always use personal protective equipment (e.g.: Safety shoes) and adopt prudent and proper conduct.
• The installation kit (screws and plugs) supplied with the hood is only to be used on masonry walls: in case of installation on walls of a different material, assess other installation options keeping in mind the type of wall surface and the weight of the hood (indicated on page 2).
• Keep in mind that installations with different types of fastening systems from those supplied, or which are not compliant, can cause electrical and mechanical seal danger.
• Do not install the hood outdoors and do not expose it to atmospheric elements (rain, wind, etc.).

ELECTRICAL SAFETY

• The electrical system to which the hood is to be connected must be by local standards and supplied with an earthed connection in compliance with safety regulations in the country of use.
• It must also comply with European standards regarding radio antistatic properties.
• Before installing the hood, check that the electrical mains power supply corresponds with what is reported on the identification plate located inside the hood.
• The socket used to connect the installed equipment to the electrical power supply must be within reach: otherwise, install a mains switch to disconnect the hood when required.
• Any changes to the electrical system must be carried out by a qualified electrician.
• The maximum length of the flue fastening screws (supplied by the manufacturer) must be 13 mm. The use of non-compliant screws with these instructions can lead to danger of an electrical nature.
• Do not try to solve the problem yourself in the event of equipment malfunction, but contact the Dealer or an authorized Servicing Department for repairs.
• When installing the hood, disconnect the equipment by removing the plug or switching off the main switch.

FUMES DISCHARGE SAFETY

• Do no connect the equipment to discharge pipes of fumes produced from combustion (for example boilers, fireplaces, etc.).
• Before installing the hood, ensure that all standards in force regarding discharge of air out of the room have been complied with.
• Deviation for Australia and New Zeland: Range hoods and other cooking fume extractors may adversely affect the safe operation of appliances burning gas or other fuels (including those in other rooms) due to back flow of combustion gases.
• These gases can potentially result in carbon monoxide poisoning.
• After installation of a range hood or other cooking fume extractor, the operation of flued gas appliances should be tested by a competent person to ensure that back flow of combustion gases does not occur. (AS/NZS 60335.2.31:2013/A4:2020)

USER WARNINGS

• These warnings have been drawn up for your personal safety and those of others.
• You are therefore kindly asked to read the booklet carefully in its entirety before using the or cleaning the equipment.
• The Manufacturer declines all responsibility for any damage caused directly, or indirectly, to persons, things and pets as a consequence of failing to comply with the safety warnings indicated in this booklet.
• It is imperative that this instructions booklet is kept together with the equipment for any future consultation.
• If the equipment is sold or transferred to another person, make sure that the booklet is also supplied so that the new user can be made aware of the hood’s operation and relative warnings.
• After the stainless steel hood has been installed, it will need to be cleaned to remove any residues remaining from the protection adhesive as well as any grease and oil stains which, if not removed, can cause irreversible damage to the hood surface.
• To properly clean the unit, the manufacturer recommends using the supplied moist wipes, which are also available sold separately. Insist on original spare parts.

INTENDED USE

• The equipment is solely intended to be used to extract fumes generated from cooking food in non-professional domestic kitchens: any other use is improper. Improper use can cause damage to persons, things, pets and exempts the Manufacturer from any liability.
• The equipment can be used by children over the age of 8 and by persons with reduced physical, sensory and mental abilities, or with no experience or knowledge, as long as they do so under supervision or after having received relative instructions regarding safe use of the equipment and understanding of the dangers connected to it.
• Children are not to play with the equipment. Cleaning and maintenance by the user must not be carried out by children without supervision.

USE AND CLEANING WARNINGS

• Before cleaning or carrying out maintenance operations, disconnect the equipment by removing the plug or switching off the main switch.
• Do not use the hood with wet hands or bare feet. Always check that all electrical parts (lights, extractor fan) are off when the equipment is not being used.
• The maximum overall weight of any objects placed or hung (if applicable) on the hood must not exceed 1.5 Kg.
• Always supervise the cooking process during the use of deep-fryers: Overheated oil can catch fire.
• Do not leave open, unattended flames under the hood.
• Do not prepare food over an open flame under the hood.
• Never use the hood without the metal anti-grease filters: in this case, grease and dirt will deposit in the equipment and compromise its operation.
• Accessible parts of the hood can be hot when used at the same time as the cooking appliances.
• Do not carry out any cleaning operations when parts of the hood are still hot.
• There can be a risk of fire if cleaning is not carried out according to the instructions and products indicated in this booklet.
• Disconnect the main switch when the equipment is not used for long periods.
• If other appliances that use gas or other fuels are being used at the same time (boiler, stove, fireplaces, etc.), make sure the room where the fumes are discharged is well-ventilated, in compliance with the local regulations.

INSTALLATION: only intended for qualified personnel

Before installing the hood, carefully read the chapter ‘SAFETY INSTRUCTIONS AND WARNINGS’.

TECHNICAL FEATURES

• The technical specifications are exhibited on the labels located inside the hood.

POSITIONING

• The minimum distance between the highest part of the cooking equipment and the lowest part of the hood is indicated in the installation instructions.
• Generally, when the hood is placed over gas cookers, the distance must be at least 65 cm (25.6”). However, according to of standard EN60335-2-31, the minimum distance between the cooker and lower part of the hood can be reduced to the quota reported in the installation instructions.
• Should the instructions for the gas cooker specify a greater distance, this must be taken into consideration.
• Do not install the hood outdoors and do not expose it to outdoor environment (rain, wind, etc.).

ELECTRICAL CONNECTION

(only intended for qualified personnel)

• Disconnect the equipment from electrical mains power supply before carrying out any operations on the hood.
• Ensure that the wires inside the hood are not disconnected or cut: in the event of damage, contact your nearest Servicing Department.
• Refer to qualified personnel for electrical connections.
• Connection must be carried out in compliance with the provisions of law in force.
• Before connecting the hood to the electrical mains power supply, check that:
• voltage supply corresponds with what is reported on the data plate located inside the hood;
• the electrical system is compliant and can withstand the load (see the technical specifications located inside the hood);
• the power supply plug and cable do not come into contact with temperatures exceeding 70 °C;
• the power supply system is effectively and properly connected to earth in compliance with regulations in force;
• the socket used to connect the hood is within reach.

In case of:

• devices fitted with cables without a plug: the type of plug to use is a ”standardised” one. The wires must be connected as follows: yellow-green for earthing, blue for neutral and brown for the phase. The plug must be connected to an adequate safety socket.
• fixed equipment not provided with a power supply cable and plug, or any other device that ensures disconnection from the electrical mains, with an opening gap of the contacts that enables total disconnection in overvoltage category III conditions.
• Said disconnection devices must be provided in the mains power supply in compliance with installation regulations.
• The yellow/green earth cable must not be cut off by the switch.
• The Manufacturer declines all responsibility for failure to comply with the safety regulations.

FUMES DISCHARGE

EXTERNAL EXHAUST HOOD (SUCTION)

In this version the fumes and vapours are discharged outside through the exhaust pipe. To this end, the hood outlet fitting must be connected via a pipe, to an external output.

The outlet pipe must have:

• a diameter not less than that of the hood fitting.
• a slight slope downwards (drop) in the horizontal sections to prevent condensation from flowing back into the motor.
• the minimum required number of bends.
• the minimum required length to avoid vibrations and reduce the suction performance of the hood.
• You are required to insulate the pipes if it passes through cold environments. In the presence of motors with 800m3/h or higher, a check valve is present to prevent external air from flowing back.

Deviation for Germany:
when the kitchen hood is used at the same time as appliances that are powered by energy other than electricity, the negative pressure in the room must not exceed 4 Pa (4 x 10-5 bar).

HOOD WITH INTERNAL RECIRCULATION (FILTERING)

In this model, the air passes through the charcoal filters to be purified and recycled in the environment. Ensure that the active carbon filters are assembled into the hood, if not, install them as indicated in the assembly instructions. In this version the check valve must not be assembled: remove it if it is on the air outlet fitting of the motor.

ASSEMBLY INSTRUCTIONS

• only intended for qualified personnel
• The hood can be installed in various configurations.
• The generic assembly steps apply to all installations; for each case, follow the specific steps provided for the required installation.

OPERATION

WHEN TO TURN ON THE HOOD?

• Switch on the hood for at least one minute before starting to cook to direct fumes and vapors toward the suction surface.
• After cooking, leave the hood operating until complete extraction of all vapors and odors. Using the Timer function, it is possible to set an auto switch-off function which will allow the hood to turn off automatically after 15 minutes of operation.

WHICH SPEED IS TO BE SELECTED?

• 1st speed: maintains the circulation of clean air with low electricity consumption.
• 2nd speed: normal conditions of use.
• 3rd speed: the presence of strong odors and vapors.
• 4th speed: rapid disposal of odors and vapors.

WHEN SHOULD THE FILTERS BE WASHED OR REPLACED?

• The metal filters must be cleaned every 30 hours of operation.
• The active carbon filters must be replaced every 3-4 months, depending on the use of the hood.
• For further details see the “MAINTENANCE” chap.

ELECTRONIC PUSHBUTTON PANEL

• If the pushbutton panel is completely inactive, before contacting the Technical assistance service, disconnect power temporarily to the appliance (about 5“), possibly by acting on the main switch, to restore normal operation.
• If this measure has no effect, contact the Technical assistance service.

MAINTENANCE

• Before cleaning or carrying out maintenance operations, disconnect the equipment by removing the plug or switching off the main switch.
• Do not use detergents containing abrasive, acidic or corrosive substances or abrasive cloths.
• Regular maintenance guarantees proper operation and performance over time.
• Special attention is to be paid to the metal anti-grease filters : frequent cleaning of the filters and their supports ensures that no flammable grease is accumulated.

CLEANING OF EXTERNAL SURFACES

• You are advised to clean the external surfaces of the hood at least once every 15 days to prevent oily substances and grease from sticking to them. To clean the brushed stainless steel hood, the Manufacturer recommends using “Magic Steel” wipes.
• Alternatively and for all the other types of surfaces, it can be cleaned using a damp cloth, slightly moistened with mild, liquid detergent.
• Complete cleaning by rinsing well and drying with soft cloths.
• Do not use too much moisture or water around the push button control panel and lighting devices in order to prevent humidity from reaching electronic parts.
• The glass panels can only be cleaned with specific, non-corrosive or non-abrasive detergents using a soft cloth.
• The Manufacturer declines all responsibility for failure to comply with these instructions.

CLEANING OF INTERNAL SURFACES

• Do not clean electrical parts, or parts related to the motor inside the hood, with liquids or solvents.
• For the internal metal parts, see the previous paragraph.

METAL ANTI-GREASE FILTERS

• It is advised to frequently wash the metal filters (at least once a month) leaving them to soak in boiling water and cleaning solution for 1 hour, taking care not to bend them.
• Do not use corrosive, acid or alkaline detergents.
• Rinse them well and wait for them to be completely dry before reassembling them.
• Washing in a dishwasher is permitted, however, it may cause the filter material to darken: to reduce the possibility of this problem from happening, use low-temperature washes (55°C max.).
• To extract and insert the metal anti-grease filters see the assembly instructions.

ACTIVE CARBON FILTERS

• These filters retain the odours in the air that passes through them. The purified air is recirculated into the environment.
• The active carbon filters must be replaced on average every 3-4 months under normal conditions of use.
• See assembly instructions to replace the active carbon filters.

LIGHTING

• The range hood is equipped with high efficiency, low consumption LED spotlights with an extremely long life-span under normal use conditions.
• Should the LED spotlight need to be replaced, proceed as shown in the figure.

DISPOSAL AFTER

DISPOSAL AFTER END OF USEFUL LIFE

• The crossed-out trash or refuse bin symbol on the appliance means that the product is WEEE, i.e.
• “Waste electrical and electronic equipment”, accordingly it must not be disposed of with regular unsorted waste (i.e. with ”mixed household waste”), but it must be disposed of separately so that it can undergo specific processing for its re-use, or a specific treatment, to remove and safely dispose of any substances that may be harmful to the environment and remove the raw materials that can be recycled.
• Proper disposal of these products contributes to saving valuable resources and avoiding potential negative effects on personal health and the environment, which may be caused by inappropriate disposal of waste.
• You are kindly asked to contact your local authorities for further information regarding the designated waste collection points nearest to you. Penalties for improper disposal of such waste can be applied in compliance with national regulations.

INFORMATION ON DISPOSAL IN EUROPEAN UNION COUNTRIES

• The EU WEEE Directive was implemented differently in each country, accordingly, if you wish to dispose of this appliance we suggest contacting your local authorities or dealer to find out what the correct method of disposal is.

INFORMATION ON DISPOSAL IN NON-EUROPEAN UNION COUNTRIES

• The crossed-out trash or refuse bin symbol is only valid in the European Union: if you wish to dispose of this appliance in other countries, we suggest contacting your local authorities or dealer to find out what the correct method of disposal is.

WARNING!

• The Manufacturer reserves the right to make changes to the equipment at any time and without prior notice. Printing, translation and reproduction, even partial, of this manual are bound by the Manufacturer’s authorization.
• Technical information, graphic representations, and specifications in this manual are for information purposes and cannot be divulged.
• This manual is written in Italian. The Manufacturer is not responsible for any transcription or translation errors.

CONTACT

• Falmec S.p.A
• via dell’Artigianato, 42 z.i.
• 31029 Vittorio Veneto
• Treviso — Italy
• [email protected].
• falmec.com.
• Codice / Code
• Matricola / Serial Number
• Code 110031103 Ed. 03/2021

References

• Cappe da Cucina Aspiranti e Filtranti - Made in Italy | Falmec.com
• Mack Energy Corporation - Commited to Our Community and Your Tommorow

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>