SENCOR SSS 3900 Kids Bluetooth Speaker with Microphone User Manual

SENCOR SSS 3900 Kids Bluetooth Speaker with Microphone

Specifications

• Product Name: SSS 3900 Kids
• Model: SSS 3900
• Type: Kids Bluetooth Speaker with Microphone
• Power Source: Matches specifications on the model name plate
• Control Panel: C

Safety Instructions

• This product has been designed with maximum safety in mind.
• However, incorrect use may lead to electric shock or fire. Therefore, users must follow these instructions when using this device.
• This device uses a semiconductor unit and contains no user serviceable parts. Do not disassemble this product, as you may be exposed to electric shock. If this product is damaged, have it repaired by a qualified service technician.

Power source
The power supply for this unit must match the specifications on the model name plate.

• Heat source
  Keep this unit away from heat sources such as stoves or direct sunlight.

• Cleaning
  Prior to cleaning, please disconnect power first. Do not use liquid cleaners or corrosive liquids for cleaning – only clean the unit with a soft cloth.

• Heavy objects
  Do not place heavy objects on the unit as this may damage the unit.

• Connecting other devices
  Before connecting other devices to this unit, please make sure to disconnect the power. Otherwise, you could damage your device.

Malfunctions requiring repair
If any of the following problems occurs, please disconnect power to the unit and contact a qualified service technician.

• Power cord or plug is damaged.
• Liquids or other foreign objects have penetrated inside the unit.
• If the unit does not work even if it’s being operated according to the instructions, don’t press any buttons other than those described in these instructions. Doing so may damage the unit and increase the difficulty of repairing the unit.
• This unit has been dropped from a great height.
• Burns can be smelled from the product inside.

Maintenance

• If you don’t have enough technical knowledge necessary to maintain this unit, don’t attempt to repair it by yourself. By removing the cover, you are exposed to a risk of electric shock. If needed, please contact a qualified service technician.

Replacement of parts

• If you need to replace any part of this unit, ask your service technician to replace it with spare parts of the same model. If other replacement spare parts are used from a different model, this may result in electric shock or shorten the life of the unit.

Safety check

• When done with the maintenance, ask your service technician to perform an on-site safety check to make sure that the unit’s operation is safe.

Note
Before using this product, read these instructions carefully and keep them for future reference.

Included Contents

Description of the BT speaker and microphone

SSS 3900 front side

A| Telescopic FM antenna
B| Bassreflex
C| Control panel
S| Strap eyelets
H| BT speaker carrying handle
E| LED effect
P| Treble speaker
L| Left channelcentre speaker
R| Right channelcentre speaker
SSS 3900 control panel “C”
1| Display
2| Rotary volume down/up control
3| Memory card slot
4| USB-A for playback from memory device
5| Previous track / change to lower FM frequency button
6| PLAY / PAUSE / SCAN button – in FM band FM scan mode
7| Next track / change to higher FM frequency button
8| MODE / SHIFT button – change source (Bluetooth, USB-A audio playback, memory card, AUX-IN, FM radio)
9| REC / DEL button
10| TWS button
11| Equalizer “INDOOR” button – mode suitable for listening at home
12| Equalizer “OUTDOOR” button – mode suitable for listening outdoors
13| MIC PRIORITY button – suppresses the sound being played
14| Light effects button / turn on and off BT speaker alert messages
15| Input for audio AUX IN jack (3.5 mm)
16| Jack microphone input (3.5 mm)
17| USB – A “DC 5 V OUT” – for charging a mobile device
18| Microphone input (6.3 mm), MIC 1 and MIC 2
19| Guitar input (6.3 mm), GUITAR IN
20| Rocker switch (on/off) “I” / “0”
21| LED indicator (red LED – charging process; blue LED – charged)
22| DC 9 V input for charging the SSS 3900
23| Rotary control – BASS
24| Rotary control – TREBLE
25| Rotary control for microphone volume level
26| Rotary control – ECHO
27| Rotary control for guitar input volume level
Wireless microphone

28| Sound sensor
29| LED indicator
30| On/off switch
31| Space for 2 AA / LR6 1.5 V batteries

Putting into Operation

• Before first use, be sure to read the safety instructions contained in this user’s manual carefully.
• Before first use, please charge the BT speaker to a maximum level. Switch the rocker switch to the on position “I” to turn on the BT speaker. Switching on is accompanied by an audible signal. To turn off the BT speaker, switch the rocker switch to off “0” position. To change the source of the music being played, press and hold the “Play / Pause / SCAN” button while it is on.

Transmission and BT Speaker Position

1. The BT speaker offers 2 transmission options.
   • use the “H” handle located on the top of the BT speaker.
   • attach the strap to the holes provided for the “S” attachment. You can then carry the BT speaker over your shoulder.
2. The speaker offers 1 positioning option. The side designated for the correct position is always fitted with rubber feet on the underside of the BT speaker.

Caution
Always position the device so that it does not endanger the health of persons in the vicinity or cause damage to property.

Pairing Devices via Bluetooth

Turn on the BT speaker in Bluetooth mode and search for the Bluetooth name “SSS 3900 KIDS” in the device you want to pair. Start the pairing process. If you are requested to enter a pairing code while your device and the BT speaker are pairing, use the code: “0000”. To disconnect the paired device, end the pairing session on your mobile device or long hold the “Change source” button. Disconnection will be indicated by an acoustic tone.

Note
To ensure a stable Bluetooth connection, make sure that the distance between the BT speaker and your connected device is kept within 10 meters.

TWS Feature

• If you purchase another speaker “SSS 3900 KIDS”, you can pair them together for optimal stereo sound. First, make sure your device is not connected to any BT speaker. Then press the “TWS” button on each of the BT speakers and wait until the “True wireless paird” message is heard.
• Then connect your mobile phone to the parent BT speaker. The device to which your mobile device is connected is set as the left audio channel.
• Changing the volume level using the rotary volume control will automatically affect both paired BT speakers. To cancel pairing, press the “TWS” button on one of the BT speakers. You will be informed about the cancelled pairing with the message “True wireless disconnected”.

Note
In TWS mode, microphone control is performed on the BT speaker to which the microphone is connected.

Caution
The TWS feature is only available in the Bluetooth mode. It is not possible to pair the device with another type of BT speaker with TWS function, even within a re-edition of products with a different Bluetooth name.

Audio AUX IN
The BT speaker is equipped with a 3.5mm jack. Your device can be connected to the BT speaker via the supplied audio cable. First connect the audio plug to your device and then to the BT speaker’s jack.

• Caution
  Before connecting your device to the BT speaker, please make sure that the output signal from your device is set to minimum (minimum output volume). This will prevent the BT speaker from damage. When the audio cable is connected, the BT speaker does not meet the water ingression protection class.

• Note
  In this mode, not all functions of the BT speaker are available. The Bluetooth function is not active if the audio jack is connected to the BT speaker.

Play / Pause / SCAN Button

• Press the “Play / Pause / SCAN” button briefly to start or pause music playback during a Bluetooth connection when a memory card or USB storage media is inserted. In FM mode, the button is used to automatically search for available FM stations.

Operating the Rotary Controls

Change the position of the rotary control (+/-) to set the desired output value on the BT speaker. Turn the rotary control to the left to decrease the setting value. Turn the rotary control to the right to increase the setting value.

1. Volume control
   Turn the rotary control to adjust the desired output volume level from the BT speakers. Adjusting the output volume will not affect the volume of the microphone inputs, wireless microphone and connected guitar.

2. BASS” setting control
   Turn the rotary control to adjust the bass level you want.

3. TREBLE” setting control
   Turn the rotary control to adjust the treble level you want.

4. MIC VOL” microphone volume control
   Turn the rotary control to adjust the microphone volume level to your desired level
   (applies to “MIC 1”, “MIC 2”and wireless microphone input)

5. “ECHO” level setting
   Turn the rotary control to adjust the microphone echo level to your desired level
   (applies to “MIC 1”, “MIC 2” and wireless microphone input)

6. GUITAR VOL” guitar input volume control
   Turn the rotary control to set the volume level you want for the connected guitar.

Caution
Before starting to play music, make sure the volume control is not turned up to the maximum level.

FM Radio

• Press the “MODE/SHIFT” button repeatedly on the unit until FM and broadcasting frequency appear on the display.
• To search for stations within range and store them automatically in the preset memory, long press “the PLAY / PAUSE / SCAN” button in FM reception mode. We recommend that you perform a complete station search at least once before using the radio reception function. All stations
• found will remain in memory even after the power is turned off. When the machine finishes searching, it automatically tunes in to preset number 1 (P01). Use the “change to lower FM frequency” and “change to higher FM frequency” buttons to change the saved FM frequency.

Light Effects
The BT speaker is equipped with light effects in the speaker area. To turn off the light effects, press the “light effects” button. To switch on the light effects, press the “light effects” button briefly.

Note
In FM radio mode, the lighting effects cannot be switched on due to possible interference.

Turning off BT Speaker Notifications and Alerts

Press and hold the “light effects / turn on and off BT speaker alert messages” button to turn the BT speaker notification and alert messages off or on. When turned off and on, the BT speaker will remember the last selected mode.

Power Bank Feature

• The BT speaker can be also used as a Power bank to charge another portable devices. Connect your mobile device to the USB-A slot “DC 5 V OUT”. The charging will take place automatically as long as the BT speaker is turned on. This is a feature that does not replace charging as efficiently as charging a portable device from a charging adapter.
• Playback from USB Storage Media / Memory Card

USB-A Playback
Insert a USB storage device with audio content into the USB slot “for playback from memory device”. The music playback from the connected storage will start automatically. Upload your music to the storage in the order in which it will be played by the BT speaker.

Memory Card Playback

• Insert the memory card with the contacts towards the centre of the BT speaker. When you insert a memory card, the BT speaker will automatically start playing back its contents. If there is no file to play on the memory card, the BT speaker will switch to the last active source being played. To release the TF memory card, press it gently into the BT speaker with your fingernail or a blunt instrument and the card will release. Then you can carefully remove it with your fingernails (or with tweezers).

Caution
Due to a number of devices on the market, compatibility and playback support are not guaranteed for all media. The memory devices you want to connect should be tested in advance and/or formatted as FAT32. The playback of protected media, files or content stored inside them may fail.

Voice Recording on USB-A

• Insert an empty USB storage device into the USB slot “for playback from memory device”. Press the “REC/DEL” button to record your voice from the microphone to the USB storage device. The recorded audio file will be saved on your USB storage device in the REC folder, the most recent file will have the highest number. The files created are without system values such as time and date.
• To stop recording, press the “REC/DEL” button, the recording will stop and the last track you recorded will start. To view or play all previous tracks, insert the USB storage device into your computer. The BT speaker is set to no longer interfere with the REC folder. During playback of the last track, pressing and holding the “REC/DEL” button will erase the last recorded track and start playing the previous track

Changing the Equalizer

• The device will offer two preset sound modes. Press the “INDOOR” or “OUTDOOR” button to change the equalizer.

Microphones / Guitar Input / MIC PRIORITY Function

• The microphone control on the BT speaker is common to all inputs marked “MIC 1”, “MIC 2” and wireless microphone.

MIC PRIORITY Function

• The on function is used to suppress the music being played from sources such as FM, Bluetooth, etc. The audio being played will be suppressed and the transmission from the microphones will be prioritised.

Wireless microphone

• A wireless microphone is included. Insert two AA/LR6 1.5V batteries into the wireless microphone before first use. Unscrew the bottom microphone cover in a counterclockwise direction. Insert the prescribed batteries with polarity “+” and “-” according to the drawing inside the wireless microphone. Screw the bottom cover clockwise. Switch the microphone on with the “on/off” switch to the ON position and wait a few seconds for the wireless microphone to connect to the switched on BT speaker. The red LED will show the wireless microphone status on. To turn off the wireless microphone, switch the “on/off” switch to the OFF position.

Cable Microphones

• If you want to connect multiple microphones to the speaker, you can use the prepared microphone inputs labelled “MIC 1” and “MIC 2”. Connect your mono dynamic microphone with unbalanced 6.3 mm jack connection to the inputs.

Guitar Input

• The guitar input marked “GUITAR IN” on the control panel is ready for guitar connection. The volume control of the guitar input is done by turning the “GUITAR VOL” control knob.

Caution
Avoid feedback by keeping the microphone far enough away from the SSS 3900 KIDS speakers. If you get too close, feedback will occur and may result in damage to the speakers or the hearing of a person near the system.

Charging the BT Speaker

A charged battery provides power for several hours of operation at normal volume levels. A high volume consumes more battery power; therefore, we recommend listening at normal volume levels. To charge the BT speaker, please connect the charging adapter to the mains and then to the BT speaker. Only use the original charging adapter supplied with the BT speaker. The charging indicator on the control panel “C” will glow red until the battery is fully charged. Fully charged status will be indicated by a blue LED. A low battery level will be indicated by an audible alert.

Recommendation

• If the unit is not to be used for an extended period of time, we recommend to fully charge the battery once every two to three months. We recommend to store the unit with a the battery charged to prevent irreparable damage to the battery (loss of capacity).

Technical Specifications

• SSS 3900 KIDS
• Kids bluetooth speaker with microphone
• Kids party speaker
• Wireless microphone included
• Karaoke with optional recording
• Multi-colour LED speaker lighting
• Built-in rechargeable battery
• Wireless microphone
• Range up to 10m
• Microphone battery: type AA (not included)
• Operating time: approx. 4 hours
• ECHO function

Sound

• Power output: 100 W (impedance: 4 Ω)
• Frequency response: 100 Hz – 20 kHz
• Total harmonic distortion: ≤ 1%
• 3 speakers (2 midrange + 1 tweeter)

Inputs

• Bluetooth Audio 5.0
• Connection Distance up to 15m
• Aux audio input (3.5 mm jack)
• USB (1x playback, 1x power supply)
• MicroSDHC card slot
• 2× microphone input (6.3 mm jack)
• Guitar input (6.3 mm jack)

Others

• TWS – True Wireless Stereo
• FM PLL radio
• LED display
• Karaoke with ECHO function and volume setting
• Built-in battery: 8000 mAh Li-Ion
• Playback time of up to 13 hours (@ 50% volume)
• Charging: 9 V (LED indication)
• USB charging port
• Accessories: rechargeable adapter (DC 9 V, 1 A), microphone, textile carrying strap, 3.5 mm AUX cable, manual
• Dimensions: 630×300×160 mm
• Weight: 5.5 kg

“SHENZHENSHI XIANGSHENG TECHNOLOGY CO., LTD 3 Floor, Building 21, No.102, South of Rentian Industrial Road, Fuyong Street, Baoan District, Shenzhen City, P.R, China”| –
Model identification code| XS12-090100L| –
Input voltage| 100-240V| V
Input frequency| 50/60“| Hz
Output voltage| 9| V
Output current| 1| A
Output power| 12| W
Average efficiency in active mode| 69.0| %
Efficiency at low load (10%)| /| %
No load power consumption| 0.06| W

INSTRUCTIONS AND INFORMATION ON THE DISPOSAL OF DISCARDED PACKAGING

MATERIALS

Take the packaging material to a collection yard for disposal.

DISPOSAL OF DISCARDED ELECTRICAL AND ELECTRONIC EQUIPMENT

This symbol on the product, accessory or packaging indicates that the product must not be treated as normal household waste. Please dispose of this product in a collection yard designated for the recycling of electrical and electronic equipment. In some EU countries or in some European countries, you can return your products to your local retailer when you buy an equivalent new product. By disposing of this product properly, you are helping to protect valuable natural resources and prevent the potential negative environmental and human health impacts that could result from improper waste disposal. Please contact your local authority or the nearest waste collection yard for further details. Improper disposal of this type of waste may be subject to a legal fine.

For companies in the European Union

• If you need to dispose of electrical or electronic equipment, ask your dealer or supplier for the necessary information.

Disposal in countries outside the European Union

• If you wish to dispose of this product, please ask the Ministry or your dealer for the necessary information on the correct disposal method.

Warranty conditions

• Warranty card is not a part of the device packaging.
• This product is warranted for the period of 24 months from the date of purchase to the end-user. Warranty is limited to the following conditions. Warranty is referred only to the customer goods using for common domestic use. The claim for service can be applied either at dealer’s shop
• where the product was bought, or at below mentioned authorized service shops. The end-user is obligated to set up a claim immediately when the defects appeared but only till the end of warranty period. The end user is obligated to cooperate to certify the claiming defects. Only completed and clean (according to hygienic standards) product will be accepted. In case of eligible warranty claim the warranty period will be prolonged by the period from the date of claim application till the date of taking over the product by end-user, or the date the end-user is obligated to take it over. To obtain the service under this warranty, end-user is obligated to certify his claim with duly completed following documents: receipt, certificate of warranty, certificate of installation.

This warranty is void especially if apply as follows

• Defects which were put on sale.
• Wear-out or damage caused by common use.
• The product was damaged by unprofessional or wrong installation, used in contrary to the applicable
• instruction manual, used in contrary to legal enactment and common process of use or used for another purpose which has been designed for.
• The product was damaged by uncared-for or insufficient maintenance.
• The product was damaged by dirt, accident of force majeure (natural disaster, fire, and flood).
• Defects on functionality caused by low duality of signal, electromagnetic field interference etc.
• The product was mechanically damaged (e.g. broken button, fall). image caused by use of unsuitable media, fillings, expendable supplies (batteries) or by unsuitable
• Repair, modification or other failure action to the product by unauthorized person.
• End-user did not prove enough his right to claim (time and place of purchase).
• Data on presented documents differs from data on products.
• Cases when the claiming product cannot be identified according to the presented documents (e.g. the serial number or the warranty seal has been damaged).

Manufacturer

• Visit www.sencor.com for detailed information about authorized service centers.
• The original version of the instructions is in the Czech language, other language versions are made by the appropriate translation.

References

• Fast Poland | Strona główna
• Design and quality for you | Sencor
• Od televizorů až po kuchyňské roboty, vše pro radost | Sencor
• Design and quality for you | Sencor
• Békéltető testületek
• Fogyasztói Portál

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>