RENPHO R-A012 Solar Power Weighing Scale User Manual

RENPHO R-A012 Solar Power Weighing Scale

RENPHO is dedicated to protecting the environment by reducing paper usage. Scan the QR Code or enter the URL below to view or download the full version of the electronic User Manual:

https://renpho.com/pages/solar-powered-smart-scale

Important Safety Instructions

READ ALL INSTRUCTIONS CAREFULLY BEFORE USING.
When using this device, the following basic precautions should be always followed:

1. The scale is for household use only and not for medical or commercial use.
2. Any persons who may be pregnant, suffer from osteoporosis, have a pacemaker, artificial joints, portable ECG or other metal devices implanted in their body are advised against using this product. If doing so, please use for weight measurement exclusively and wear shoes to bypass the electric current when stepping on the scale for measurement.
3. This device is a solar-powered scale. Charge it with direct sunlight or other light sources. It does not support USB charging.
4. To ensure accuracy, please try to measure at the same time and under the same conditions.
5. Turn on the switch before the first use. Switch the scale off if it is not used for a long time.
6. To activate the scale, step on it without shoes.
7. Do not use the scale in the environment with sudden temperature changes.
8. Use the scale on a dry, flat, solid, and even surface.
9. Do not stand on the sides of the scale or jump on the scale to avoid any injury.
10. Do not overload the scale (Max. 180kg/400 lb).
11. Place/use the scale in a well-lit area (At least 2″ “appear on the display.) to ensure it receives sufficient light for prolonged use.
12. Place the scale in the area where 4 “ ” appears on the display to obtain faster charging when it is in low battery.
13. All body composition data is for reference and should not be used as a substitute for advice from a licensed health care professional.
14. Avoid splashing water on the solar panel on the scale.
15. Do not immerse the scale in water or use chemical cleaning agents. Clean the scale with a slightly damp cloth.
16. Do not attempt to disassemble the scale for any reason, otherwise, the warranty may be void.

About the Product

Product Parameters

• Product Name: Smart Scale
• Model: R-A012
• Working Voltage: 3.7V
• Working Current: ≤50mA
• Built-in Battery: S00mAh
• Unit: kg/lb (Switch via the App)
• Precision:
  • < 50kg: ±0.3kg
  • < 110Ib: ±0.66Ib
  • 50-100kg: ±0.4kg
  • 110Ib-220Ib: ±0.88 lb
  • > 100kg: ±0.Skg
  • > 220Ib: ±1.1 lb
• Increments: 0.05kg/0.2Ib
• Weighing Range: 0.2-180kg/0.4-400Ib
• Product Size: 280x280x23mm/11x11x0.9inch
• Product Weight: 1.3kg/2.9Ib

Product Introduction

Display

1. To ensure the scale receives sufficient light for prolonged use, place/use it in a well-lit area. (At least 2 “ ” appear on the display.)
2. To obtain faster power storage, place the scale in an area with direct sunlight (4″ “appears on the display.) when it is in low battery.

Icon

Using the Product

Before Use

• Place the scale on a dry, flat, solid, and even surface. Avoid any wet, slippery, carpeting or uneven flooring.
• Turn ON the switch on the back of the scale.
• Recalibrate: Step on the scale platform lightly and then step off. The scale’s display will show “CAL” and then “0.00”, indicating that the recalibrating process is complete.
• Start measuring.

Measuring

• Step on the scale with dry and bare feet on the scale’s electrodes and wait for 3-5 seconds.
• When the number shown on the scale’s display flashes twice, the measurement is complete.
  • The measurements can be viewed via the Renpho Health App if the connection is successful.

Tips:

1. To ensure accuracy, please try to measure at the same time and under the same conditions.
2. Do not wear shoes to step on the scale to avoid any damage to the scale platform and electrodes.
3. The scale will be on standby status if left idle for 10 seconds. Step on the scale lightly to activate it once again.

App Guides

Step 1: Download the Renpho Health App

• Search “Renpho Health” from the Apple Store or Google Play or scan the QR code below to download the app.
• System Requirements: iOS 12.0 or above, Android 7.0 or above.

Due to continuous updates and improvements, the “Renpho Health” App may appear slightly different.

Step 2: Login/Register

• Log in directly with an existing RENPHO App account.
• If you don’t have a REN PHO App account, tap “Sign up”. Register a new account using your email address and complete your profile information, which is required for calculating the measurements only.

Note:
You can also log in using Guest Mode if you do not wish to register an account. However, your measurements will not be saved if you log in on another device.

Step 3: Add Device
Enable Bluetooth on your smartphone before adding a device. (Location is required by Android System.)

Method 1:

• Step on the scale and a window will pop up.
• Tap “Pair” to pair your smartphone with the scale.

Method 2:

• Tap “Add device” on the top right corner of the “Health Page” to connect manually.
• Tap “Body Fat Scale”.
• Step on the scale following the in-app instructions until a window pops up on the screen.
• Tap”+” to connect. (The Bluetooth icon will turn solid on the scale’s display once the pairing is successful.)

Step 4: Measure

• Step on the scale with dry and bare feet on the scale’s electrodes and wait for 3-5 seconds.
• Once the number flashes twice and ” 0000 “disappears on the scale’s display, the measurement is complete and the data will be synced to the app if the connection is successful.
• Tap “See details” to view your measurement reports.

Switch Units
To switch units, tap “Settings” and then tap “Units” to choose the unit according to your need.

FAQs

1. How can I turn on the scale?
   Turn ON the switch on the back of the scale and step on to activate it without shoes.

2. Do I need to replace the battery?
   No, you don’t. The scale is powered by solar power and other light sources.

3. How can I change the scale?
   Place the scale in a well-lit area. The stronger the light intensity is, the faster the scale obtains power.
   Note: Do Not cover the solar panel.

4. How can I know the current battery level?
   Check the battery percentage on the scale’s display. 100% means that the scale is at full charge.

5. How can I know the current light intensity?
   Check the number of “ “on the scale’s display. The more” ” there are, the stronger the light intensity is.
   Note: Do Not cover the solar panel.

6. Why does the scale stop working?
   The scale may have run out of power.

   • Place the scale in the sun to obtain power. Ensure that the solar panel is not covered.

Warranty Policy

Your RENPHO product purchase is covered by a one-year limited manufacturer warranty from the date of delivery. For warranty terms and conditions, please visit https://renpho.com/pages/warranty-terms-and-conditions.

Note:
Product registration is not required for the warranty. If you choose not to register your product, it will not diminish the product warranty.

Customer Service

Please feel free to contact us if you have any questions or concerns. REN PHO Customer Service Team guarantees a quick response and hassle-free solutions to any issue you may have within business hours.

• Tel: +44(0)7434-666088 (UK ONLY)
  Monday-Friday 9:00 AM-5:00 PM (GMT)
  +1(844) 417 0149 (US ONLY)
  Monday-Friday 9:00 AM-4:30 PM

• Email:

  • support@renpho.com (US)
  • support-eu@renpho.com (UK&EU)

For defective products or the return of items, please contact us with your order number within the specified warranty period. DO NOT dis­pose of any product parts as they may be required for inspection/repair.

Notice:
This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

FCC Regulatory Compliance

This device complies with part 15 of the FCC Rules. Operation Is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used In accordance with the instructions, may cause harmful interference to radio communications.

However, there Is no guarantee that interference will not occur In a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED Regulatory compliance
This device contains license-exempt transmitters that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s).

Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

UK Importer: EEON(UK)LIMITED
Kemp House 160 City Road, London, EC1V 2NX, United Kingdom

EU Importer: Renpho GmbH
Lehmweg 17, 20251 Hamburg Hoheluft-Ost, Deutschland, Germany Tel: +49 40 23969285 (DE ONLY)

Manufacturer: Shenzhen Ruiyi Business Technology Co., Ltd.
Qianhai Complex A201, Qianwan Road 1, Qianhai Shenzhen-Hong Kong Cooperation Zone, Shenzhen, 518000 P.R.China

Richers & Vision Ltd.
Unit 58B, Bordon Enterprise Park, Budds Lane, Bordon, Hampshire, GU35 0JE, U.K.

C &E Connection E-commerce (DE) GmbH

• Zurn Linnegraben 20, 65933, Frankfurt am Main, Germany
• Email: info@ce-connection.de.

Made in China.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>