Whirlpool FWF71052W Washing Machine User Guide
- June 14, 2024
- Whirlpool
Table of Contents
Whirlpool FWF71052W Washing Machine
Product Specifications
- Max load : 9 Kg
- Programmes : Mixed, Cotton, Bed Linen, Sport
- Temperatures: Default Range
- Max spin speed (rpm) : 1400
- Dosing : Required for some programmes, optional for others
Product Description
- Worktop
- Detergent dispenser
- Control panel
- Door handle
- Door
- Water filter – behind the plinth
- Plinth (removable)
- Adjustable feet (4)
Control Panel
The control panel consists of the following buttons:
- ON/OFF button
- Programme selector
- Temperature button
- Spin button
- Start delay button
- Start/Pause button
- Option buttons
- Key lock button
Detergent Dispenser
The detergent dispenser has the following compartments:
- Main wash compartmen t: For detergent, stain remover, or water softener. Use the removable plastic partition for liquid detergent and place it in slot B for powder detergent.
- Prewash compartment: For prewash detergent.
- Softener compartment: For fabric softener or liquid starch. Pour in softener or starch solution only up to the max mark.
Programmes
Choose the appropriate program for your laundry based on the care labels of
the garments. The tub symbol indicates the maximum temperature for washing the
garment. The available programmes are:
- Mixed : For lightly to normally soiled resilient garments in cotton, linen, synthetic fibres, and mixed fibres.
- Cotton : For normally to heavily soiled and robust cotton.
- Bed Linen : Washes bed linen and towels in one cycle, optimizing softener performance and saving time and energy. Powder detergents recommended.
- Sport : For lightly soiled sports clothing (tracksuits, shorts, etc.). Do not exceed the maximum load indicated in the Programme Chart. Liquid detergent is recommended.
Product Usage Instructions
-
Before Using the Appliance
Before using the appliance, carefully read the Health and Safety guide. Additionally, ensure that the transport bolts are removed. Refer to the Installation Guide for detailed instructions on how to remove them. -
Turning On the Appliance
To turn on the appliance, press the ON/OFF button. -
Selecting a Programme
Use the Programme Selector button to choose the desired programme for your laundry. -
Adjusting Temperature and Spin Speed
Use the Temperature button to adjust the temperature and the Spin button to adjust the spin speed according to your preferences. -
Start Delay
If you want to delay the start of the wash cycle, press the Start the delay button and set the desired delay time. -
Starting or Pausing the Cycle
Press the Start/Pause button to start the cycle. Press it again to pause the cycle if needed. -
Using Option Buttons
The appliance has option buttons that provide additional features or customization options. Refer to the user manual for detailed instructions on each option. -
Using the Key Lock
Press the Key lock button to lock the control panel and prevent accidental changes to the settings.
Frequently Asked Questions (FAQ)
How do I register my appliance?
To receive complete assistance, please register your appliance on
www.whirlpool.com.au.
What should I do if there is a failure during the cycle?
In the event of any failures, refer to the Troubleshooting section in the
user manual.
How much detergent should I use?
The recommended dosage for detergent depends on the programme and load
size. Refer to the Programme Chart and follow the instructions for each
compartment in the detergent dispenser.
Can I use liquid detergent for all programmes?
Liquid detergent is recommended for some programs, while powder detergent
is recommended for others. Refer to the Programme Chart for specific
recommendations.
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
To receive more complete assistance, please register your appliance on www.whirlpool.com.au
Before using the appliance carefully read the Health and Safety guide. Before using the machine, it is imperative that the transport bolts are removed. For more detailed instructions on how to remove them, see the Installation Guide.
CONTROL PANEL
- “ON/OFF” button
- Programme selector
- “Temperature” button
- “Spin” button
- “Start delay” button
- “Start/Pause” button
- Option buttons
- “Key lock“button
INDICATORS
The door can be opened
Washing phase
Indicates the washing phase of the cycle
-
Failure : Call Service
Refer to the Troubleshooting section -
Failure: Water filter clogged
Water cannot be drained; water filter might be blocked -
Failure: Water tap closed
No or not sufficient inlet water. “Beep” sound every 5 seconds.
In the event of any failures, refer to the Troubleshooting section in USER MANUAL
PROGRAMME CHART
Test wash cycle in compliance with regulation and AS/NZS 2040.1 and AS/NZS 2040.2: set programme Cotton with a temperature of 60°C at 1400 rpm (load of 9 kg). This data may differ in your home due to changing conditions in inlet water temperature, water pressure etc. Approximate programme duration values refer to the default setting of the programmes, without options.
The display will show the suggested spin speed as the default value. The duration of the programme is shown on the display. 6th Sense – the sensor technology adapts water, energy and programme duration to your wash load.
PRODUCT DESCRIPTION
- Worktop
- Detergent dispenser
- Control panel
- Door handle
- Door
- Water filter – behind the plinth
- Plinth (removable)
- Adjustable feet (4)
DETERGENT DISPENSER
-
Main wash compartment
Detergent for the main wash, stain remover or water softener. For a liquid detergent it is recommended to use removable plastic partition A (supplied) for a proper dosage. If powder detergent is used, place the partition into slot B. -
Prewash compartment
Detergent for the prewash. -
Softener compartment
Fabric softener. Liquid starch.
Pour in softener or starch solution only up to the “max” mark. -
Release button
Press to remove the tray for cleaning.
PROGRAMMES
For choosing the appropriate programme for your kind of laundry, always respect the instructions on the care labels of the laundry. The value given in the tub symbol is the maximum temperature possible for washing the garment.
Mixed
For washing lightly to normally soiled resilient garments in cotton, linen,
synthetic fibres and mixed fibres.
White / Drum Clean
For washing normally to heavily soiled towels, underwear, table and bed linen,
etc in resilient cotton and linen. Only when the temperature is selected at
90°C the cycle provided with a prewash phase before the main washing phase. In
this case, it is recommended to add detergent both, in the prewash and main
wash sections.
Cotton
Normally to heavily soiled and robust cottons.
Cotton
For washing normally soiled cotton garments. At 60°C, this is the standard
cotton programme and the most efficient in terms of water and energy
consumption.
Bed Linen
Use this program to wash bed linen and towels in one single cycle. It
optimises softener performance and helps you save time and energy. We
recommend using powder detergent.
Sport
For washing lightly soiled sports clothing (tracksuits, shorts, etc.). For
best results, we recommend not exceeding the maximum load indicated in the
‚‘‘‘PROGRAMME CHART‘‘. We recommend using liquid detergent and adding the
amount suitable for half-load.
Duvet
Designed for washing eiderdown padded items such as double or single duvets,
cushions and anoraks. It is recommended to load such padded items in the drum
with the edges folded inwards and not to exceed ¾ of the drum’s volume. For
optimal washing, we recommend using a liquid detergent.
Steam Refresh
This programme refreshes garments by removing bad odours and relaxing the
fibres (2 kg, roughly 3 items). Insert dry items only (that are not dirty) and
select the program “Steam Refresh”. Garments will be a little damp at the end
of the cycle and can be worn after a few minutes. The “Steam Refresh”
programme makes ironing easier.
- Not recommended for wool or silk garments.
- Do not add softeners or detergents.
Spin & Drain
Spins the load then empties the water. For resilient garments. If you exclude
the spin cycle, the machine will drain only
Rinse & Spin
Rinses and the spins. For resilient garments.
Rapid 30 min
For washing lightly soiled garments quickly. This cycle lasts only 30 minutes,
saving time and energy.
Colours 15°
This cycle helps protect colours by washing in cold water (15°C) and uses less
energy to heat the water while still offering satisfactory wash results.
Suitable for lightly soiled, stained garments. This cycle offers wash results
comparable to 40°c mixed at just 15°C.
Silk
Use this cycle to wash all silk garments. We recommend the use of a special
detergent which has been designed to wash delicate clothes.
Wool
All wool garments can be washed using the programme ‚“Wool“ even those
carrying the “hand-wash only “ label. For best results, use special detergents
and do not exceed max kg declaration of laundry.
Delicates
For washing particularly delicate garments. Preferably turn garments inside
out before washing.
Synthetics
For washing soiled garments made from synthetic fibres (such as polyester,
polyacrylic, viscose, etc.) or cotton/synthetic blends.
FIRST TIME USE
- The first time the machine is switched on, you will be asked to select the language and the display will automatically show the language selection menu.
- To select the desired language press the “Temperature” button or “Start delay” button; to confirm the selection press the “Spin” button.
- To change the language switch off the washing machine and press buttons “Key lock” , “Intensive rinse” and “ ” simultaneously until an alarm is heard: the language-selection menu will be displayed again.
- To remove any residues from the manufacturing process.
- Select the “Cotton” program at a temperature of 60°C. Add a small amount of heavy-duty detergent to the main wash compartment of the detergent dispenser (maximum 1/3 of the quantity recommended by the detergent manufacturer for lightly soiled laundry). Start the programme without adding any laundry.
DAILY USE
- Prepare your laundry according to the recommendations in the “HINTS AND TIPS” section. Load the laundry, close the door, open the water tap and press the “ON/OFF” button to switch the washing machine on, the “Start/Pause” button flashes.
- Turn the programme selector to the desired programme and select any option if needed. The temperature and spin speed shown on the display can be changed by pressing the “Temperature” button or the “Spin” button.
- Pull out the detergent dispenser and add the detergent (and additives/softener) now. Observe the dosing recommendations on the detergent pack. Then close the detergent dispenser.
STARTING CYCLE
- Press the “Start/Pause” button.
- The machine will lock the door ( symbol OFF) and the drum will start to rotate; the door will be unlocked ( symbol on) and then locked again ( symbol OFF) as preparation phase of each washing cycle.
- The “Clicking” noise is part of the door-locking mechanism. Water will enter the drum and start the washing phase once the door is locked.
PAUSE A RUNNING PROGRAMME
- To pause the wash cycle, press the button “Start/Pause” again; the indicator light will flash. If the symbol is illuminated, the door may be opened.
- To start the wash cycle from the point at which it was interrupted, press the button again.
OPEN THE DOOR, IF REQUIRED
- Before starting and after the end of a programme, the “Door open” symbol lights to show that the door can be opened. As long as a wash programme is running, the door remains locked.
- To open the door while a programme is in progress, press the “Start/Pause” button. Provided the water level and/or temperature is/are not too high, the “door open” indicator lights up and you can open the door. For example to add/ remove laundry.
- Press the “Start/Pause” button again to continue the programme.
PROGRAMME END
- The “Door open” indicator lights up, and the display shows “Cycle end”.
- To switch off the washing machine after the program ends press the “ON/OFF” button, and the lights go off.
- If you do not press the “ON/OFF” button, the washing machine will switch off automatically after about 10 minutes.
- Close the water tap. Open the door and unload the machine.
- Leave the door ajar to allow the drum to dry.
OPTIONS
- If the selected function is incompatible with the set program, the incompatibility will be signalled by a buzzer (3 beeps) and the wording“No Selection” will appear on the display.
- If the selected function is incompatible with another previously set function, the wording “No Selection” will appear on the display and the function will not be enabled.
Clean+
Clean+ is an option working on 3 different levels (Intensive, Daily and
Fast) that are specially designed to set the right washing action, depending
on your cleaning needs:
- Intensive : this option is designed for high levels of dirtiness, removing most stubborn stains.
- Daily : This option is designed to remove everyday stains.
- Fast : this option is designed to remove lightly soiled stains.
Intensive rinse
By selecting this option, the efficiency of the rinse is increased and optimal
detergent removal is guaranteed. It is particularly useful for sensitive skin.
Press the button once, two or three times to select an additional 1, 2 or 3
rinses after the standard cycle rinse and remove all traces of detergent.
Press the button again to go back to the “Normal rinse” rinse type.
Delay Timer
To set the selected programme to start at a later time, press the button to
set the desired delay time. “Waiting” or “Starts in” is indicated on the
display when this option is enabled. To cancel the delayed start, press the
button again until the value ‚‘‘–:–‘‘ is shown on the display . This option
enhances washing performance by generating steam to inhibit the proliferation
of the main bad odour sources inside the machine. After the steam phase, the
washing machine will perform gentle tumbling through slow rotations of the
drum . option starts after the cycle ends for a maximum duration of 6h and you
can interrupt at any time by pressing any button on the control panel or
turning the knob. (*) Wait around 5’ before opening the door.
Steam Hygiene
This option enhances washing performance by generating steam during the wash
cycle that eliminates any bacteria from fibres while treating them at the same
time. Place the laundry in the drum, choose a compatible program and select
the option ****. The steam generated during washing machine operation may
cause the porthole door to become hazy.
Easy Iron
By selecting this function, the wash and the spin cycles will be modified to
reduce the formation of creases.
Temperature
Every programme has a predefined temperature. If you want to change the
temperature, press the “Temperature” button. The value appears on the display.
Spin
Every programme has a predefined spin speed. If you want to change the spin
speed, press the “Spin” button. The value appears on the display.
Demo mode
To deactivate this function, switch the washing machine OFF. Then press and
hold the “Start/Pause” button, within 5 seconds press also “ON/OFF” button and
hold both buttons for 2 seconds.
KEY LOCK
To lock the control panel, press and hold the “KEY LOCK” button for
approximately 3 seconds. When the display visualises “KEY LOCK ON” the control
panel is locked (except the ON/OFF button). This prevents unintentional
changes to programmes, especially with children near the machine. To unlock
the control panel, press and hold the “KEY LOCK” button for approximately 3
seconds.
HINTS AND TIPS
Sort your laundry according to
Type of fabric/care label (cotton, mixed fibres, synthetics, wool, handwash
items). Colour (separate coloured and white items, wash new coloured items
separately). Delicates (wash small items – like nylon stockings – and items
with hooks – like bras – in a cloth bag or pillow case with a zip).
Empty all pockets
Objects like coins or lighters can damage your laundry as well as the drum.
Follow dosage recommendations/additives
It optimizes the cleaning result, avoids irritating residues of surplus
detergent in your laundry and saves money by avoiding waste of surplus
detergent
Use low temperature and longer duration
The most efficient programmes in terms of energy consumption are generally
those that perform at lower temperatures and longer duration. Observe the load
sizes Load your washing machine up to the capacity indicated in the “PROGRAMME
CHART” table to save water and energy.
Noise and remaining moisture content
They are influenced by the spinning speed: the higher the spinning speed in
the spinning phase, the higher the noise and the lower the remaining moisture
content.
DESCALE AND CLEAN PROCEDURE
A message on the display will regularly (roughly every 50 cycles) advise
the user to run the cleaning cycle to clean the washing machine and combat
limescale build-up and bad odours. To start the cleaning cycle select the
“White” program at a temperature of a minimum of 60°C. Start the programme
without adding any laundry. For optimal maintenance, we suggest using WPRO
Limescale and grease remover, according to the instructions shown on the
package. The product can be purchased by contacting the technical assistance
service or through the website https://www.whirlpool.com.au/. Whirlpool
declines all liability for any damages to the appliance caused by the use of
other cleaning products for washing machines available on the market.
CLEANING & MAINTENANCE
For any cleaning and maintenance, switch off and unplug the washing machine.
Do not use flammable fluids to clean the washing machine.
Clean and maintain your washing machine periodically (at least 4 times per
year).
Cleaning the outside of the washing machine
Use a soft damp cloth to clean the outer parts of the washing machine. Do not
use glass or general purpose cleaners, scouring powder or similar to clean the
control panel – these substances might damage the printing
Checking the water supply hose
Check the inlet hose regularly for brittleness and cracks. If damaged, replace
it with a new hose available through our After-Sales Service or your
specialist dealer. Depending on the hose type:
If the inlet hose has a transparent coating, periodically check if the colour
intensifies locally. If yes, the hose may leak and should be replaced.
Cleaning the water filter / draining residual water
- If you use a hot wash programme, wait until the water has cooled down before draining any water.
- Clean the water filter regularly, to avoid the water cannot drain after the wash due to obstruction of the filter. If the water cannot drain, the display indicates that the water filter may be clogged.
- Remove the plinth by using the removable plastic partition of the detergent dispenser:
- Push downwards one side of the plinth with your hand, then push the removable plastic partition into the gap between the plinth and front panel and pry open the plinth.
- Place a broad, flat container beneath the water filter, to collect the drain water.
- Slowly turn the filter counterclockwise until water flows out. Let the water flow out, without removing the filter. When the container is full, close the water filter by turning it in clockwise.
- Empty the container. Repeat this procedure until all the water has drained. Lay a cotton cloth beneath the water filter, which can absorb a small amount of rest water. Then remove the water filter by turning it out anti-clockwise.
- Clean the water filter:
- Remove residues in the filter and clean it under running water.
- Insert the water filter and reinstall the plinth:
- Reinsert the water filter again by turning it in a clockwise direction.
- Make sure to turn it in as far as it goes; the filter handle must be in a vertical position.
- To test the water tightness of the water filter, you can pour about 1 litre of water into the detergent dispenser.
- Then reinstall the plinth.
Cleaning the detergent dispenser
Remove the detergent dispenser by pressing the release button and at the same
time pulling out the detergent dispenser. Remove the insert from the detergent
dispenser, as well as the insert of the softener compartment. Clean all parts
under running water, removing all detergent or softener residues. Wipe the
parts dry with a soft cloth. Reinstall the detergent dispenser and push it
back into the detergent compartment.
ACCESSORIES
Contact our After-Sales Service to check if the following accessories are available for your washing machine model.
Stacking kit shelf
By which your dryer can be fixed on top of your washing machine to save space
and to facilitate loading and unloading your washing machine in the higher
position.
TRANSPORT AND HANDLING
- Never lift the washing machine by holding it at the worktop.
- Pull out the mains plug, and close the water tap.
- Make sure that the door and detergent dispenser are properly closed.
- Disconnect the inlet hose from the water tap, and remove the drain hose from your draining point.
- Remove all rest water from the hoses, and fix them so that they cannot get damaged during transport.
- Refit the transport bolts. Follow the instructions for removing the transport bolts in the INSTALLATION GUIDE in reverse order.
TROUBLESHOOTING
The washing machine may sometimes not work properly for certain reasons. Before calling the Support Centre, it is recommended to check to see if the problem can be easily resolved using the following list.
| Anomalies: | Possible causes / Solutions: |
|---|---|
| The washing machine does not turn on. | • The |
plug is not inserted into the electrical outlet, or not enough to make contact.
• There has been a power failure.
The wash cycle does not start.| • The door is not fully closed.
• The ON/OFF button has not been pressed.
• The START/PAUSE button has not been pressed.
• The water tap is not open.
• A “start delay” has been set.
The washing machine does not fill with water (the message “NO WATER”, Turn tap on” is shown on the display). “Beep” sound every 5 seconds.| • The water intake hose is not connected to the tap.
• The hose is bent.
• The water tap is not open.
• The mains water supply has been shut off.
• There is not enough pressure.
•The START/PAUSE button has not been pressed.
The washing machine loads and drains water continuously.| • The drain hose has not been installed at 65 to 100 cm from the ground.
• The end of the drain hose is immersed in water.
•The drain connector on the wall does not have an air vent.
If the problem persists after having performed these checks, close the water tap, shut off the washing machine, and call the Support Centre. If the dwelling is located on one of the uppermost floors of a building, a siphon effect can sometimes occur, thus causing the washing machine to load and drain water continuously. Special anti-siphon valves are available on the market to prevent these types of problems.
The washing machine does not drain or does not spin.| • The programme does not include the draining function: with certain programmes, it must be activated manually.
•The drain hose is bent.
•The drain line is obstructed.
The washing machine vibrates excessively during the spin cycle.| •At the time of installation, the drum was not properly unlocked.
•The washing machine is not level.
•The washing machine is squeezed between furniture and the wall.
The washing machine leaks water.| •The water intake hose has not been tightened properly.
•The detergent dispenser is clogged.
• The drain hose has not been properly fastened.
The machine is locked and the display flashes, indicating an error code
(e.g. F-01, F-..).| • Shut off the machine, disconnect the plug from
the outlet, and weigh about 1 minute before turning it back on. If the problem
persists, call the Support Centre.
Too much foam is formed.| • The detergent is not
compatible with the washing machine (it must bear the wording “for washing
machines”, “ for hand washing and washing machines”, or something similar).
• The dosage was excessive.
The door is locked, with or without failure indication, and the programme does not run.| • Door is locked in case of power breakdown. The programme will continue automatically as soon as the mains are available again.
• The washing machine is in a standstill. The programme will continue automatically after the origin of the standstill does not persist anymore.
You can download the H&S INSTRUCTIONS by:
- Visiting our website – http://docs.whirlpool.eu
- Using QR code
- Alternatively, contact our After‑sales Service (See phone number in the warranty booklet). When contacting our After‑sales Service, please state the codes provided on your product’s identification plate.
400011678180
References
- Whirlpool Docs
- Whirlpool Australia | Kitchen & Laundry Appliances
- Whirlpool Australia | Kitchen & Laundry Appliances