TCP Smart SMAWHFAN1500WBHN1903 Heating and Cooling Bladeless Portable Fan Instructions
- June 14, 2024
- TCP Smart
Table of Contents
TCP Smart SMAWHFAN1500WBHN1903 Heating and Cooling Bladeless Portable Fan Instructions
- From the homepage go to the SMART menu
- Start a smart automation using the + icon top righ
- Choose WHEN DEVICE STATUS CHANGES from the list
- Select your heater
- Choose CURRENT TEMPERATURE from the function menu
- Make sure the less than icon is selected and choose the desired minimum temperature
- Choose RUN THE DEVICE from the smart automation list
- Select your heater
- Select SWITCH from the function list to turn the heater on
- Make sure ON is selected
- Select MODE from the function list
- Choose the HIGH HEAT mode
- To set the target temperature choose TARGET TEMPERATURE from the function list
- Set the target temperature where the heater will turn off
- The Oscillation setting to rotate the heater can be chosen by selecting OSCILLATION from the functions list
- Choose whether you want the heater to oscillate from the menu
- Click NEXT
- The smart automation can be set to work at specific times. To do this select EFFECTIVE PERIOD
- Choose custom to set a the specific times
- Set the start and end time for the automation
- Select REPEAT from the list
- Select the days the automation should work
- The automation can be renamed if desired and save to finish 23.24. You will now see the heater automation in the automation tab. Please ensure it is switched on
Read User Manual Online (PDF format)
Loading......