BLACK DECKER LBXR20CK Power Connect Lithium Ion Instruction Manual

BLACK DECKER LBXR20CK Power Connect Lithium Ion

*INSTRUCTION MANUAL 20V MAX Battery Catalog Numbers: LBXR20BT**

• Maximum initial battery pack voltage (measured without a workload) is 20 volts. Measured under a workload, nominal voltage is 18.

IMPORTANT SAFETY INSTRUCTIONS FOR LI-ION BATTERIES -SAVE THESE

INSTRUCTIONS

• The battery pack is not fully charged out of the carton. Before using the battery pack and charger, read the safety instructions below. Then follow charging procedures.

WARNING: To reduce the risk of injury, basic safety precautions should always be followed including:

• Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The battery pack can explode in a fire. Toxic fumes and materials are created when battery packs are burned.

• Do not charge or use battery in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Inserting or removing the battery from the charger may ignite the dust or fumes.

• If battery contents come into contact with the skin, immediately wash area with mild soap and water. If battery liquid gets into the eye, rinse water over the open eye for 15 minutes or until irritation ceases. If medical attention is needed, the battery electrolyte for LI-ION batteries is composed of a mixture of liquid organic carbonates and lithium salts.

• Contents of opened battery cells may cause respiratory irritation. Provide fresh air. If symptoms persists, seek medical attention.
  WARNING: Burn hazard. Battery liquid may be  flammable if exposed to spark or flame.

• Charge the battery packs only in BLACK+DECKER
  LI- ION compatible chargers.

• Never force the battery pack into the charger. Do not modify the battery pack in any way to fit into a non-compatible charger as battery pack may rupture causing serious personal injury.

• DO NOT splash or immerse in water or other liquids. This may cause premature cell failure.

• Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 105°F (40C˚) (such as outside sheds or metal buildings in summer).
  WARNING: Never attempt to open the battery pack for any reason. If battery pack case is cracked or damaged, do not insert into charger. Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has received a sharp blow, been dropped, run over or damaged in any way (i.e., pierced with a nail, hit with a hammer, stepped on). Damaged battery packs should be returned to service center for recycling.
  WARNING: Fire hazard. Do not store or carry battery so that metal objects can contact exposed battery terminals. For example, do not place battery in aprons, pockets, tool boxes, product kit boxes, drawers, etc., with loose nails, screws, keys, etc. Transporting batteries can possibly cause fires if the battery terminals inadvertently come in contact with conductive materials such as keys, coins, hand tools and the like. The US Department of Transportation Hazardous Material Regulations (HMR) actually prohibit transporting batteries in commerce or on airplanes (i.e., packed in suitcases and carry-on luggage) UNLESS they are properly protected from short circuits. So when transporting individual batteries, make sure that the battery terminals are protected and well insulated from materials that could contact them and cause a short circuit. NOTE: Batteries should not be put in checked baggage.

• When traveling on airlines, be sure to comply with the airline restrictions on usage of personal electronic devices and Bluetooth®.

• The out of range alert feature has been designed to act as an aid to warn against products getting misplaced or stolen. It is not a security system.

• The connectivity range is up to 100 feet depending on environment and location.

• The shortwave radio frequency signals of a Bluetooth® device may impair the operation of other electronic and medical devices (such as pacemakers or hearing aids).

IMPORTANT CHARGING NOTE

• Read manuals originally supplied with charger and tool before charging and using this battery. The batteries should be recharged when they fail or produce insufficient power on jobs which were easily done previously. Recharge discharged batteries as soon as possible after use or battery life may be greatly diminished. For longest battery life, do not discharge batteries fully.

THE RBRC™ SEAL

• The RBRC® (Rechargeable Battery Recycling Corp­oration) Seal on the nickel cadmium, nickel metal hydride or lithium­ion batteries (or battery packs) indicates that the costs to recycle these batteries (or battery packs) at the end of their useful life have already been paid by BLACK+DECKER. In some areas, it is illegal to place spent nickel cadmium, nickel metal hydride or lithium­ion batteries in the trash or municipal solid waste stream and the Call 2 Recycle® program provides an environmentally conscious alternative. Call 2 Recycle, Inc., in cooperation with BLACK+DECKER and other battery users, has established the program in the United States and Canada to facilitate the collection of spent nickel cadmium, nickel metal hydride or lithium­ion batteries. Help protect our environment and conserve natural resources by returning the spent nickel cadmium, nickel metal hydride or lithium­ion batteries to an authorized BLACK+DECKER service center or to your local retailer for recycling. You may also contact your local recycling center for information on where to drop off the spent battery. RBRC® is a registered trademark of Call 2 Recycle, Inc.

FUNCTIONALITY

• This battery pack is capable of connecting with mobile devices that support Bluetooth® Smart (or Bluetooth® 4.0) technology. To see if your mobile device is compatible, visit: http://www.bluetooth.com/Pages/Bluetooth­Smart­Devices­List.aspx BLACK+DECKER SMARTECHTM is an optional application for your smart device (such as a smart phone or tablet) that can connect and control BLACK+DECKER SMARTECHTM products that are specifically marked with the Bluetooth® Smart logo*.

GETTING STARTED WITH SMARTECHTM

NOTE: The SMARTECHTM App is governed by separate terms and conditions available for viewing through the mobile application.

1. Step 1: Download the BLACK+DECKER SMARTECHTM application at:
2. Step 2: Follow the instructions in the app to create your SMARTECHTM account.
3. Step 3: To connect your battery pack with the BLACK+DECKER SMARTECHTM app, ensure your device’s Bluetooth® is on, then go to the “My Tools” screen in the app. Press the “+” symbol to add the battery. You will then be prompted to give the product an individual name.
4. Step 4: To activate the pairing process, press the USB on/off button (1). It will beep when pressed. Hold the button for 5 seconds, or until it beeps again, to complete pairing.
5. Step 5: Once the connection is established, you will be asked if you would like to pair as well as confirm that you would like to register the product on A 2 your black and decker. com account. Pair the the battery and it will then be added to the “My Tools” screen in 1 the app.

• For more information on BLACK+DECKER SMARTECHTM functionality and features, please call 1-800-544-6986, visit www.blackanddecker.com or view the FAQ page and help screens located inside the mobile application.

USB POWER PORTS

The LBXR20BT Bluetooth® battery is equipped with a USB Type A power port (2). It delivers 1 amp total current.

• Make sure battery is charged.
• Insert a USB plug into USB power port to supply power or charge your device.
• Press the USB button (1) or turn the USB on through the SMARTECHTM app.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by BLACK+DECKER is under license. Other trademarks and trade names are those of their respective owners. This Class B digital apparatus complies with Canadian CAN ICES­3 (B)/NMB­3(B).

• This Device complies with Industry Canada License­ exempt RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device.

• This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter.

• This device complies with Part 15 of the FCC Rules and with Industry Canada License ­exempt RSS standard(s). Operation
  is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that

• may cause undesired operation.
  Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotopically radiated power (e.i.r.p.) is not more than that necessary for successful communication NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

THREE-YEAR LIMITED WARRANTY

• Black & Decker (U.S.) Inc. warranties this product to be free from defects in material or workmanship for a period of three (3) years following the date of purchase, provided that the product is used in a home environment. This limited warranty does not cover failures due to abuse, accidental damage or when repairs have been made or attempted by anyone other than BLACK+DECKER and its Authorized Service Centers. A defective product meeting the warranty conditions set forth herein will be replaced or repaired at no charge in either of two ways: The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer).Returns should be made within the time period of the retailer’s policy for exchanges. Proof of purchase may be required. Please check with the retailer for its specific return policy regarding time limits for returns or exchanges. The second option is to take or send the product (prepaid) to a BLACK+DECKER  owned or authorized Service Center for repair or replacement at BLACK+DECKER’s option. Proof of purchase may be required. BLACK+DECKER owned and authorized service centers are listed online at www.blackanddecker.com. This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which vary from state to state.
• Should you have any questions, contact the manager of your nearest BLACK+DECKER Service Center. This  product is not intended for commercial use, and accordingly, such commercial use of this product will void this warranty. All other guarantees, express or implied, are hereby disclaimed.
• LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products sold in Latin America, check country specific warranty information contained in the packaging, call the local company or see the website for such information.
• Imported by BLACK & DECKER (U.S.) Inc., 701 E. Joppa Rd.= Towson, MD 21286 U.S.A.

BLACK+DECKER WARRANTY .

• Distributor Name
• Date of purchase
• Invoice No.
• PRODUCT INFOMATION · IDENTIFICACIÓN DEL PRODUCTO Cat. No.
• Serial Number
• Name
• Last Name
• Address
• Last Name ·
• Address
• City
• State
• Postal Code
• Country
• Telephone  No
• Catalog Number LBXR20BT Copyright © 2016 BLACK+DECKER

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>