SINCHER SCV06 Vacuum Cleaner Corded with 17KPa Handheld Vacuum Instruction Manual

June 14, 2024
SINCHER

SINCHER SCV06 Vacuum Cleaner Corded with 17KPa Handheld Vacuum

SINCHER-SCV06-Vacuum-Cleaner-Corded-with-17KPa-Handheld-Vacuum-
product

IMPORTANT SAFETY INSTRUCTIONS

When using an electric appliances, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS

BEFORE USING (THIS APPLIANCE)

WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, DAMAGE OR INJURY:

  1. To protect against electrical shock, do not immerse power cord or plug in water or any other liquid. To avoid the risk of electrical shock or serious personal injury, always operate with dry hands.
  2. Close supervision is necessary when any appliance is being used by or near children. This vacuum is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the vacuum by a person responsible for their safety.
  3. Do not use the vacuum outdoors. It is for household use only.
  4. Do not use the vacuum if it has been dropped, damaged, left outdoors, or dropped in water. Please contact customer service for help when the appliance or the adapter is damaged.
  5. Use the vacuum only as described in this manual. The use of accessory attachments not recommended may cause damage to the vacumi or personal irjuries.
  6. Do not use abrasive materials to clean the vacuum. Do not use spirits or other solvents to clean the appliance.
  7. Do not use the appliance to vacuum all the below things:
    • Water, flammable or combustible liquids such as gasoline;
    • Lighted stub, matches, hot ashes and other combustible things;
    • Needles, pins and other sharp things;
    • Wood pieces, gesso, cement, calcimine and other tiny granules;
    • Pieces of string or fabrics.
  8. Do not pick up liquids with the vacuum or use on wet floors. Do not immerse the vacuum in water.
  9. Do not use the vacuum on concrete, tar, or similar rough surfaces.
  10. Do not vacuum frayed carpets or tassels on carpets.
  11. Do not use the vacuum without the dust cup lid in place.
  12. Do not put any object into openings of the vacuum. Do not use when any opening is blocked. Keep free of dust, lint, hair and anything that may reduce air flow.
  13. Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
  14. Store the vacuum indoors. Store after use to prevent accidents.
  15. Keep the vacuum cleaner away from stoves and heat-emitting appliance. Heat can deform and discolor the plastic parts of unit. Please use the vacuum in O to 40 degrees temperature environ­ment.
  16. Do not abuse the power cord. Never carry the vacuum by the power cord or pull the power cord to disconnect the outlet plug from an outlet; instead grasp the plug and pull to disconnect.
  17. Unplug from the outlet when not in use and before cleaning.
  18. Do not let cord hang over edge of counter or touch hot surfaces.
  19. To disconnect, always turn OFF first, then unplug power cord from wall outlet.
  20. The thermal cutout will switch off the vacuum automatically when it overheats. If this should happen, turn off the power switch, wait for 45 minutes to restart the vacuum.

SINCHER-SCV06-Vacuum-Cleaner-Corded-with-17KPa-Handheld-Vacuum-fig-
\(1\)

WHAT’S IN THE BOX

CAUTION:
Assemble the varuum according to chapter “Assembly”.

SINCHER-SCV06-Vacuum-Cleaner-Corded-with-17KPa-Handheld-Vacuum-fig-
\(2\)

OVERVIEW

SINCHER-SCV06-Vacuum-Cleaner-Corded-with-17KPa-Handheld-Vacuum-fig-
\(3\)

ASSEMBLY

SINCHER-SCV06-Vacuum-Cleaner-Corded-with-17KPa-Handheld-Vacuum-fig-
\(4\)

SPECIFICATION

  • Name: VACUUM CLEANER
  • Model: SCV06
  • Voltage: 220-240 V

OPERATING INSTRUCTIONS

Power Instruction

  1. Plug the power cord into a well-earthed wall socket.
  2. Turn on the power switch to vacuum.

Floor Brush Instruction

  1. As the above figure shown, press the highlighted part of the conversion switch to use the floor brush without bristle.This mode of floor brush can meet most of cleaning requirements.
  2. As the above figure shown, press the highlighted part of the conversion switch to use floor brush with bristle for deep clean.

Wall Hanger Use Instruction

  1. Use the screws and wall anchors to fix the wall hanger at the certain height to mount the vacuum with tube attached.
  2. After fixing the wall hanger, store accessories on the hanger as well as the vacuum when not used. SINCHER-SCV06-Vacuum-Cleaner-Corded-with-17KPa-Handheld-Vacuum-fig- \(10\)

CLEANING AND MAINTENANCE

CAUTION:

  1. Empty the dust cup when dust inside has exceeded the MAX sign, otherwise, the suction may be weakened.
  2. Always be sure that the vacuum is switched to OFF before attempting to empty the dust tank.

Clean the Dust Cup

  1. Remove the telescopic tube from the main body before maintaining and cleaning dust cup and HEPA filter.SINCHER-SCV06-Vacuum-Cleaner-Corded-with-17KPa-Handheld-Vacuum-fig- \(11\)
  2. Press the dust cup lid release button to dump dust. SINCHER-SCV06-Vacuum-Cleaner-Corded-with-17KPa-Handheld-Vacuum-fig- \(12\)

Clean the HEPA Filter & Exhaust Sponge

  1. Hold and tum the mesh shell clockwise to detach it
  2. Turn the HEPA filter clockwise to remove it out of the dust cup. SINCHER-SCV06-Vacuum-Cleaner-Corded-with-17KPa-Handheld-Vacuum-fig- \(14\)
  3. Before rinsing the HEPA filter, knock the HEPA filter slightly to dump dust on it.
  4. Turn the back cover according to the figure ( shown to remove it from the vacuum.
  5. Detach the exhaust sponge.
  6. Rinse the HEPA filter, mesh shell and the (exhaust sponge under tap water.
  7. Air dry them for at least 24 hours. Do not assemble it back until completely dry.

CAUTION:

  1. Do not assemble HEPA filter back until they are completely dry.
  2. Turn anticlockwise to assemble them back.

SINCHER-SCV06-Vacuum-Cleaner-Corded-with-17KPa-Handheld-Vacuum-fig-
\(20\)

Filter is suggested to be washed (air dry before installing back) every 2 weeks, to be replaced every 2 months, otherwise, it will result in insufficient filter system and loss of suction.

SINCHER-SCV06-Vacuum-Cleaner-Corded-with-17KPa-Handheld-Vacuum-fig-
\(21\)

Clean the Floor brush
Check the floor brush and clear the clog with tweezers.

CLEAR A CLOG

CAUTION:
Low suction or vacuum stop ped caused by overheat may be due to a clog in the vacuum. Please check and clear clogs in the dust cup, HEPA filter, sponge, telescopic tube and floor brush.

SINCHER-SCV06-Vacuum-Cleaner-Corded-with-17KPa-Handheld-Vacuum-fig-
\(22\)

TROUBLESHOOTING

PROBLEM POSSIBLE REASONS SOLUTIONS
The vacuum over- heats/stops working 1.  The air duct is blocked

2.  The dust cup is full

| A thermal cutout switches off the deaner to prevent overheating. Please restart the vacuum after cooling for 45 minutes and dean the floor brush, tube, dust cup and the HEPA filter


Use for too long time

| Do not use the vacuum for more than 60 minutes continuously. Please take a break during long time use
 | Other malfunctions| Please contact customer service for help
The cleaning results are not good| Incorrect use of the vacuum| It is recommended to use the crevice tool for better pickup for vacuuming heavy objects such as beans
1.  The air duct is blocked

2.  The dust cup is full

| Clean the floor brush, telescopic tube, dust cup and the HEPA filter regularly
The HEPA filter is not dried completely| Detach and air dry the HEPA filter. It is recommend- ed to clean and replace it regularly
There is static during vacuum working| There is too much dust inside the dust cup

The vacuum runs at an environment full of static

| Please empty the dust cup

It’s normal that there may be much static in the air in winter and dry regions

WARRANTY

CUSTOMER CARE
The 1-year Limited Warranty is valid for products purchased from our SINCHER only, starting from the date of the original retail purchased. We will provide customer service for any defects in quality or materials under normal, non-commercial use.

  1. According to the requirements outlined in this instruction manual, the warranty is subject to the following conditions and exclusions.
  2. This warranty provides, at no extra cost to you all labor and parts necessary to ensure your machine is in proper operating condition during the warranty period.
  3. We provide the repair or replacement of your SINCHER appliance if your SINCHER appliance is found to be defective due to faulty materials, workmanship function within 1 year of purchase or delivery. ( If any part is no longer available or out of manufacture, we will replace it with a functional replacement part).

WHAT IS NOT COVERED

  1. Under your SINCHER guarantee, SI NC HER shall not be liable for costs of repair or replacement of a product incurred as a result of: Accidental damage, faults caused by negligent use or care, misuse, neglect, careless operation or handling of the SI NCH ER appliance which is not in accordance with this SINCHER Instruction Manual.
  2. Machines purchased from an unauthorized dealer.
  3. Use of parts and accessories other than those produced or recommended by SINCHER.
  4. Repairs or alterations carried out by unauthorized parties or agents.
  5. Use of the machine other than for normal domestic purpose, e.g. for commercial or rental purposes.
  6. Reduction in battery run time due to battery age or use.

WARRANTY SERVICE

  1. Please inform us your model name/number, purchase date, order number, machine problem and your requirement.
  2. Your model number can be founcl on rating plate.
  3. Please keep your purchase receipt in a safe place to ensure you have this information.

Service under this warranty will not extend the available time of warranty.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals