DC-S5 Digital Camera

Product Information

Specifications

• Model: DC-S5
• Firmware Version: F0920MR1110
• Interchangeable Lens: S-R2060

About the Product

The Panasonic Digital Camera is a high-quality camera designed
for capturing stunning images and recording videos. With advanced
features and intuitive controls, this camera provides an
exceptional photography experience. Please read the following
instructions carefully to ensure proper usage of the product.

Contents of the User Manual

The user manual contains detailed information about various
aspects of the camera. Here are the chapters included:

1. Introduction
2. Getting Started
3. Basic Operations
4. Image Recording
5. Focus/Zoom
6. Drive/Shutter/Image Stabilizer
7. Metering/Exposure/ISO Sensitivity
8. White Balance/Image Quality
9. Flash
10. Recording Videos
11. Connections with External Devices (Video)
12. Playing Back and Editing of Images
13. Camera Customization
14. Menu Guide
15. Wi-Fi/Bluetooth
16. Connecting to Other Devices

Symbols Used in this Document

• Symbols for Recording Modes, Pictures, and Videos: Black icons
  indicate conditions in which functions can be used, while gray
  icons indicate conditions in which functions cannot be used.

• Operating Symbols:

  • A – Front dial
  • B – Rear dial
  • Cursor button up/down/left/right – C 3421
  • Joystick up/down/left/right
  • D – Press the center of the joystick
  • E – [MENU/SET] button
  • F – Control dial

• Other symbols may also be used to represent icons shown on the
  camera screen.

Operating Instructions

Notification Classification Symbols

• To confirm prior to using the function

• Hints for better use of the camera and tips for recording

• Notifications and supplementary items regarding
  specifications

• Related information and page number

Firmware Update

A firmware update has been made available to improve camera
capabilities and add functionality. For information about the
functions that have been added or modified, please refer to the
pages for Firmware Update.

Copyright Notice

Observe copyright laws when using this product. Recording
pre-recorded tapes, discs, or other published or broadcast material
for purposes other than your own private use may infringe copyright
laws. Recording of certain material may be restricted even for
private use.

Finding the Information You Need

You can find the information you need by referring to the
following pages in this document:

• Contents
• Contents by Function
• Names of Parts
• Menu Guide
• Index

Product Usage Instructions

1. Introduction

The Introduction chapter provides an overview of the camera’s
features and specifications.

2. Getting Started

The Getting Started chapter guides you through the initial setup
process, including inserting the battery, attaching the lens, and
configuring basic settings.

3. Basic Operations

The Basic Operations chapter covers the fundamental operations
of the camera, such as turning it on/off, adjusting settings, and
navigating the menu.

4. Image Recording

In the Image Recording chapter, you will learn how to capture
still images using various shooting modes and settings.

5. Focus/Zoom

This chapter explains how to achieve precise focus and control
zoom levels to capture sharp and detailed images.

6. Drive/Shutter/Image Stabilizer

The Drive/Shutter/Image Stabilizer chapter explores advanced
shooting techniques, including burst mode, shutter speed control,
and image stabilization.

7. Metering/Exposure/ISO Sensitivity

Learn how to adjust metering modes, exposure settings, and ISO
sensitivity to achieve optimal exposure in different lighting
conditions in this chapter.

8. White Balance/Image Quality

The White Balance/Image Quality chapter covers white balance
adjustment and various image quality settings to enhance the color
accuracy and overall image quality.

9. Flash

In this chapter, you will discover how to effectively use the
camera’s built-in flash or external flash units for better
illumination in low-light situations.

10. Recording Videos

Explore the video recording capabilities of the camera,
including different video formats, frame rates, and recording
settings in this chapter.

11. Connections with External Devices (Video)

This chapter explains how to connect the camera to external
devices, such as TVs or monitors, to view your images and videos on
a larger screen.

12. Playing Back and Editing of Images

Learn how to review and edit your captured images directly on
the camera, including cropping, resizing, and applying creative
filters in this chapter.

13. Camera Customization

Customize various camera settings and personalize your shooting
experience by following the instructions provided in this
chapter.

14. Menu Guide

The Menu Guide chapter provides detailed explanations of each
menu option and function available in the camera’s menu system.

15. Wi-Fi/Bluetooth

Discover how to connect the camera to Wi-Fi networks and utilize
Bluetooth features for wireless image transfer and remote control
in this chapter.

16. Connecting to Other Devices

This final chapter guides you through the process of connecting
the camera to other devices, such as computers or printers, for
data transfer or direct printing.

Frequently Asked Questions (FAQ)

Q: How can I update the firmware of my Panasonic DC-S5?

A: To update the firmware of your Panasonic DC-S5 camera, please
refer to the instructions provided in the Firmware Update section
of this user manual.

Q: Can I use external flash units with this camera?

A: Yes, you can use external flash units with the Panasonic
DC-S5 camera. Please refer to the Flash chapter for instructions on
how to connect and use external flash units.

Q: How do I connect my camera to Wi-Fi networks?

A: The process of connecting your Panasonic DC-S5 camera to
Wi-Fi networks is explained in detail in the Wi-Fi/Bluetooth
chapter of this user manual.

Operating Instructions Digital Camera
DC-S5
A firmware update has been made available to improve camera capabilities and to add functionality. 0 For information about functions that have been added or modified, refer to the
pages for “Firmware Update”.

Î Click here to move to “Firmware Update”.

DVQP2200ZB F0920MR1110

Please read these instructions carefully before using this product, and save this manual for future use.
Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic Digital Camera. Please read this document carefully and keep it handy for future reference. Please note that the actual controls and components, menu items, etc. of your Digital Camera may look somewhat different from those shown in the illustrations in this document.
Carefully observe copyright laws. Recording of pre-recorded tapes or discs or other published or broadcast material for purposes other than your own private use may infringe copyright laws. Even for the purpose of private use, recording of certain material may be restricted.

Finding the Information You Need
You can find the information you need by looking at the following pages in this document.

Contents Contents by Function Names of Parts Menu Guide Index

l6 l 15 l 27 l 344 l 560

2

About Operating Instructions

Symbols Used in This Document
Symbols for recording modes, pictures, and videos that can be used In this document, symbols are placed at the start of functional explanations (recording modes, pictures, and videos) showing conditions in which these functions can be used. Black icons show conditions in which these can be used, and gray icons show conditions in which these cannot be used.

Example:

/

Operating symbols In this document, camera operation is explained using the following symbols:

A

Front dial

B

Rear dial

Cursor button up/down/left/right C 3421 or
Joystick up/down/left/right

D

Press the center of the joystick

E

[MENU/SET] button

F

Control dial

0 Other symbols, such as icons shown on the camera screen, are also used in explanations.
0 This document describes the procedure for selecting menu items as follows: Example) Set [Picture Quality] of the [Photo] ([Image Quality]) menu to [STD.].
¨ [ ] ¨ [ ] ¨ [Picture Quality] ¨ Select [STD.]

3

About Operating Instructions Notification classification symbols In this document, notifications are classified and described using the following symbols:
To confirm prior to using the function Hints for better use of the camera and tips for recording Notifications and supplementary items regarding specifications Related information and page number 0 Images and illustrations used in this document are for explaining the functions. 0 Description in this document is based on the interchangeable lens (S-R2060).
4

Chapters

1. Introduction

19

2. Getting Started

33

3. Basic Operations

57

4. Image Recording

83

5. Focus/Zoom

92

6. Drive/Shutter/Image Stabilizer

128

7. Metering/Exposure/ISO Sensitivity

184

8. White Balance/Image Quality

202

9. Flash

227

10. Recording Videos

240

11. Connections with External Devices (Video) 289

12. Playing Back and Editing of Images

300

13. Camera Customization

320

14. Menu Guide

344

15. Wi-Fi/Bluetooth

416

16. Connecting to Other Devices

473

17. Materials

490

5

Contents

About Operating Instructions ……………………………………………….3 Chapters …………………………………………………………………………..5 Contents by Function………………………………………………………..15

1. Introduction

19

Before Use………………………………………………………………………19 Standard Accessories……………………………………………………….22 Lenses That Can Be Used…………………………………………………23 Memory Cards That Can Be Used………………………………………24 Names of Parts ………………………………………………………………..27
Camera…………………………………………………………………………………. 27 Supplied Lens………………………………………………………………………… 31 Viewfinder/Monitor Displays …………………………………………………….. 32

2. Getting Started

33

Attaching a Shoulder Strap………………………………………………..33 Charging the Battery…………………………………………………………34
Charging with the Charger ………………………………………………………. 34 Battery Insertion …………………………………………………………………….. 37 Inserting a Battery into the Camera for Charging ………………………… 39 Notifications Regarding Charging/Power Supply…………………………. 42 [Power Save Mode] ………………………………………………………………… 44
Inserting Cards (Optional)………………………………………………….46 Formatting Cards (Initialization)………………………………………………… 48
Attaching a Lens ………………………………………………………………49 Attaching a Lens Hood ……………………………………………………………. 51
Adjusting the Monitor Direction and Angle……………………………53 Setting the Clock (When Turning On for the First Time)…………54

6

Contents

3. Basic Operations

57

Basic Recording Operations ………………………………………………57 How to Hold the Camera …………………………………………………………. 57 Recording ……………………………………………………………………………… 59 Selecting the Recording Mode …………………………………………………. 60
Camera Setting Operations ……………………………………………….61 Monitor/Viewfinder Display Settings ……………………………………65
Setting the Viewfinder …………………………………………………………….. 65 Switching Between the Monitor and Viewfinder ………………………….. 66 Switching the Display Information …………………………………………….. 67
Quick Menu……………………………………………………………………..69 Control Panel …………………………………………………………………..71 Menu Operation Methods ………………………………………………….73
[Reset] ………………………………………………………………………………….. 76
Intelligent Auto Mode ………………………………………………………..77 Recording Using Touch Functions………………………………………80
Touch AF/Touch Shutter …………………………………………………………. 80 Touch AE………………………………………………………………………………. 81

4. Image Recording

83

[Aspect Ratio] ………………………………………………………………….83 [Picture Size]……………………………………………………………………85 [Picture Quality] ……………………………………………………………….86 [Double Card Slot Function]……………………………………………….88 [Folder / File Settings]……………………………………………………….89 [File Number Reset]………………………………………………………….91

7

Contents

5. Focus/Zoom

92

Selecting the Focus Mode …………………………………………………93 Using AF …………………………………………………………………………94
[AF Custom Setting(Photo)] …………………………………………………….. 98
Selecting the AF Mode ……………………………………………………100 [Face/Eye/Body/Animal Detect.]…………………………………………….. 102 [Tracking]……………………………………………………………………………. 105 [225-Area]…………………………………………………………………………… 107 [Zone (Vert./ Horz.)]/ [Zone (Square)]/ [Zone (Oval)]…………………. 108 [1-Area+]/ [1-Area]……………………………………………………………….. 110 [Pinpoint] ……………………………………………………………………………. 111 [Custom1] to [Custom3]………………………………………………………… 113
AF Area Movement Operation ………………………………………….115 Moving the AF Area by Touch ………………………………………………… 116 Moving the AF Area Position with the Touch Pad ……………………… 118 [Focus Switching for Vert / Hor]………………………………………………. 119
Record Using MF……………………………………………………………120 Recording with Zoom………………………………………………………124
Extended Tele Conversion …………………………………………………….. 125

6. Drive/Shutter/Image Stabilizer

128

Selecting the Drive Mode…………………………………………………128 Taking Burst Pictures………………………………………………………129 6K/4K Photo Recording …………………………………………………..133 Selecting Pictures from a 6K/4K Burst File…………………………139
Correcting Pictures After Recording (Post-Recording Refinement) …………………………………………………. 140 Picture Selection Operations ………………………………………………….. 141
Recording with Time Lapse Shot………………………………………145 Recording with Stop Motion Animation………………………………149 Time Lapse Shot/Stop Motion Animation Videos ………………..152 Recording Using the Self-timer…………………………………………154 Bracket Recording ………………………………………………………….156 [Live View Composite] …………………………………………………….162

8

Contents

Post-Focus Recording …………………………………………………….166 Selecting the Focus Point for the Picture to Save ……………………… 169 Focus Stacking …………………………………………………………………….. 171
[Silent Mode]………………………………………………………………….174 [Shutter Type] ………………………………………………………………..175 Image Stabilizer ……………………………………………………………..177
Image Stabilizer Settings……………………………………………………….. 179

7. Metering/Exposure/ISO Sensitivity

184

[Metering Mode]……………………………………………………………..184 Program AE Mode ………………………………………………………….185 Aperture-Priority AE Mode……………………………………………….187 Shutter-Priority AE Mode …………………………………………………190 Manual Exposure Mode…………………………………………………..192 Preview Mode ………………………………………………………………..195 Exposure Compensation …………………………………………………196 Locking Focus and Exposure (AF/AE Lock) ……………………….198 ISO Sensitivity ……………………………………………………………….199

8. White Balance/Image Quality

202

White Balance (WB) ……………………………………………………….202 Adjusting the White Balance ………………………………………………….. 206
[Photo Style] ………………………………………………………………….208 [Filter Settings]……………………………………………………………….215
[Simultaneous Record w/o Filter]…………………………………………….. 220
[High Resolution Mode] …………………………………………………..221 [HLG Photo] …………………………………………………………………..225

9

Contents

9. Flash

227

Using an External Flash (Optional)……………………………………227 Removing the Hot Shoe Cover……………………………………………….. 227
Setting Flash………………………………………………………………….229 [Flash Mode]………………………………………………………………………… 229 [Red-Eye Removal] ………………………………………………………………. 231 [Firing Mode]/[Manual Flash Adjust.] ……………………………………….. 232 [Flash Adjust.]………………………………………………………………………. 233 [Flash Synchro] ……………………………………………………………………. 234 [Auto Exposure Comp.] …………………………………………………………. 235
Recording Using a Wireless Flash…………………………………….236

10. Recording Videos

240

Recording Videos …………………………………………………………..240 Recording Modes Specifically for Video (Creative Video/S&Q) ……………………………………………………..244
Setting the Exposure for Recording Videos………………………………. 245 Separating Settings for Recording Video and Pictures ………………. 247
Video Recording Settings ………………………………………………..248 [Switch NTSC/PAL] ………………………………………………………………. 248 [Rec. File Format] …………………………………………………………………. 249 [Image Area of Video]……………………………………………………………. 249 [Rec Quality] ………………………………………………………………………… 250
Time Code …………………………………………………………………….254 Setting the Time Code…………………………………………………………… 254
Using AF (Video) ……………………………………………………………256 [Continuous AF]……………………………………………………………………. 256 [AF Custom Setting(Video)]……………………………………………………. 258
Video Brightness and Coloring …………………………………………259 [Luminance Level] ………………………………………………………………… 259 Recording While Controlling Overexposure (Knee)……………………. 260 [ISO Sensitivity (video)] …………………………………………………………. 262
Audio Settings………………………………………………………………..263 Main Assist Functions……………………………………………………..264
[Waveform Monitor] ………………………………………………………………. 264

10

Contents

[Luminance Spot Meter] ………………………………………………………… 266 [Zebra Pattern] …………………………………………………………………….. 267 [Frame Marker] …………………………………………………………………….. 268
Slow & Quick Video ………………………………………………………..269 [Live Cropping]……………………………………………………………….272 Log Recording ……………………………………………………………….276
[V-Log View Assist] ………………………………………………………………. 278
HLG Videos …………………………………………………………………..280 [HLG View Assist]…………………………………………………………………. 282
Anamorphic Recording ……………………………………………………283 [Anamorphic(4:3)] …………………………………………………………………. 284 [Anamorphic Desqueeze Display] …………………………………………… 286
List of Recording Qualities That Enable Special Videos to be Recorded ………………………………………………………………………287

11. Connections with External Devices (Video)

289

HDMI Devices (HDMI Output) ………………………………………….289 Images Output via HDMI ……………………………………………………….. 290
[HDMI Rec Output] …………………………………………………………292 External Microphones (Optional) ………………………………………293 XLR Microphone Adaptor (Optional)………………………………….296 Headphones ………………………………………………………………….298

12. Playing Back and Editing of Images

300

Playing Back Pictures ……………………………………………………..300 Playing Back Videos ……………………………………………………….303
Extracting a Picture ………………………………………………………………. 305
Switching the Display Mode……………………………………………..306 Enlarged Display ………………………………………………………………….. 306 Thumbnail Screen ………………………………………………………………… 308 Calendar Playback ……………………………………………………………….. 309
Group Images ………………………………………………………………..310 Deleting Images……………………………………………………………..311 [RAW Processing]…………………………………………………………..312 [Video Divide]…………………………………………………………………318
11

Contents

13. Camera Customization

320

Fn Buttons …………………………………………………………………….321 Register Functions to the Fn Buttons ………………………………………. 323 Use the Fn Buttons……………………………………………………………….. 329
[Dial Operation Switch] ……………………………………………………330 Register Functions to the Dials……………………………………………….. 330 Temporarily Change Dial Operation ………………………………………… 331
Quick Menu Customization………………………………………………332 Register to the Quick Menu ……………………………………………………. 332
Custom Mode ………………………………………………………………..337 Register in Custom Mode ………………………………………………………. 337 Using Custom Mode ……………………………………………………………… 339 Calling Up Settings ……………………………………………………………….. 340
My Menu ……………………………………………………………………….341 Registration in My Menu………………………………………………………… 341
[Save/Restore Camera Setting] ………………………………………..343

14. Menu Guide

344

List of Menu …………………………………………………………………..345 [Photo] Menu …………………………………………………………………350 [Video] Menu………………………………………………………………….364 [Custom] Menu ………………………………………………………………370 [Setup] Menu …………………………………………………………………395 [Playback] Menu …………………………………………………………….406 Entering Characters………………………………………………………..415

15. Wi-Fi/Bluetooth

416

Connecting to a Smartphone ……………………………………………418 Installing “LUMIX Sync” ………………………………………………………… 419 Connecting to a Smartphone (Bluetooth Connection) ………………… 420 Connecting to a Smartphone ([Wi-Fi connection])……………………… 424
Operating the Camera with a Smartphone …………………………430 [Remote shooting] ………………………………………………………………… 431 [Shutter Remote Control]……………………………………………………….. 433

12

Contents

[Import images]…………………………………………………………………….. 435 [Auto Transfer]……………………………………………………………………… 437 [Location Logging] ………………………………………………………………… 439 [Remote Wakeup]…………………………………………………………………. 440 [Auto Clock Set]……………………………………………………………………. 441 [Camera settings copy]………………………………………………………….. 442
Sending Images from the Camera…………………………………….443 [Smartphone] ……………………………………………………………………….. 447 [PC] ……………………………………………………………………………………. 451 [Printer] ……………………………………………………………………………….. 454 [Web service]……………………………………………………………………….. 456 [Cloud Sync. Service] ……………………………………………………………. 458
Wi-Fi Connections ………………………………………………………….460 [Via Network] ……………………………………………………………………….. 460 [Direct] ………………………………………………………………………………… 463 Connect to Wi-Fi Using Previously Saved Settings……………………. 464
Send Settings and Selecting Images…………………………………466 Image Send Settings …………………………………………………………….. 466 Selecting Images ………………………………………………………………….. 467
[Wi-Fi Setup] Menu …………………………………………………………468 “LUMIX CLUB” …………………………………………………………………….. 469

16. Connecting to Other Devices

473

Viewing on a TV……………………………………………………………..475 Importing Images to a PC ………………………………………………..478
Copying Images to a PC ……………………………………………………….. 478 Installing Software ………………………………………………………………… 480
Storing on a Recorder……………………………………………………..483 Tethered Recording ………………………………………………………..484
Installing Software ………………………………………………………………… 484 Operating the Camera from a PC……………………………………………. 485
Printing………………………………………………………………………….486

13

Contents

17. Materials

490

Using Optional Accessories……………………………………………..490 Battery Grip (Optional) ………………………………………………………….. 490 Shutter Remote Control (Optional) ………………………………………….. 491 Tripod Grip (Optional)……………………………………………………………. 492 AC Adaptor (Optional)/DC Coupler (Optional)…………………………… 492
Monitor/Viewfinder Displays …………………………………………….493 Recording Screen…………………………………………………………………. 493 Playback Screen ………………………………………………………………….. 499
Message Displays…………………………………………………………..502 Troubleshooting ……………………………………………………………..505 Cautions for Use …………………………………………………………….516 Number of Pictures That Can Be Taken and Available Recording Time with the Battery……………………………………….525 Number of Still Images That Can Be Taken and Video Recording Time with Cards ……………………………………………..528 List of Default Settings/Custom Saving/Settings Available for Copying…………………………………………………………………………531 List of Functions That Can Be Set in Each Recording Mode…545 Specifications…………………………………………………………………550

Index …………………………………………………………………………….560 Trademarks and Licenses ……………………………………………….567

14

Contents by Function

Power Source

Charging

l 34

Charging error

l 36 l 40

Battery indication

l 42

Power supply

l 41

Power save function

l 44

Number of pictures that can l 525 be taken, available recording
time

Card

Cards that can be used

l 24

[Card Format]

l 48

[Double Card Slot Function] l 88 Destination Card Slot

l 88

Switching the playback card l 302 l 308

Folder structure

l 479

[Folder / File Settings]

l 89

[File Number Reset]

l 91

Entering characters

l 415

Number of pictures, length of l 528 recording time

Lens Attaching [Focal Length Set]

l 49 l 183

Basic Settings [Language] [Clock Set] [Time Zone] [Beep] [Copyright Information] [Reset]

l 405 l 54 l 404 l 399 l 395 l 76

Viewfinder Diopter adjustment Eye sensor [Eye Sensor AF]

l 65 l 66 l 376

Display Recording screen Playback screen Viewfinder Control panel
Switching display Monitor/viewfinder adjustment Monitor/viewfinder luminance Display speed Level gauge Grid lines [Histogram] [Sheer Overlay] Checking overexposure [V-Log View Assist] [HLG View Assist]

l 493 l 499 l 32 l 71 l 497 l 67 l 397
l 398
l 396 l 391 l 385 l 384 l 390 l 389 l 278 l 282

AF/MF Focus mode [Continuous AF] Selecting the AF mode
Face/eye/human detection Animal detection Movement tracking [AF ON] Moving the AF area

l 93 l 256 l 100 l 375 l 102 l 103 l 105 l 95 l 115

15

Contents by Function

Enlarged display
Setting the AF sensitivity
AF/AE Lock Touch AF
[Touch Pad AF] [AF Assist Light] MF [MF Guide] [MF Assist] [Focus Peaking]

l 97 l 122 l 98 l 258 l 198 l 80 l 117 l 118 l 355 l 120 l 374 l 374 l 356

Image Stabilizer [Image Stabilizer] [Operation Mode] [E-Stabilization (Video)] [Boost I.S. (Video)] [Anamorphic (Video)] [Focal Length Set]

l 177 l 181 l 179 l 182 l 182 l 183

Drive Drive mode Burst [6K/4K PHOTO] [Time Lapse Shot] Recording with Stop Motion Animation [Self Timer] [Post-Focus]

l 128 l 129 l 133 l 145 l 149
l 154 l 166

Image Quality [Picture Size] [Picture Quality] RAW JPEG Aspect ratio [White Balance] [Photo Style] [Filter Settings] [Color Space] [Reduce Rolling Shutter] [6K/4K PHOTO Noise Reduction] [Long Exposure NR] [i.Dynamic Range] [Vignetting Comp.] [Diffraction Compensation]

l 85 l 86 l 86 l 86 l 83 l 202 l 208 l 215 l 371 l 140 l 141
l 351 l 353 l 354 l 354

Taking Pictures Recording mode Quick menu Zoom [Ex. Tele Conv.] Bracket recording [Live View Composite] Bulb recording [High Resolution Mode] [Multiple Exposure] [HLG Photo] [Shutter Type] [Silent Mode] Remote control recording Screen display

l 60 l 69 l 124 l 125 l 156 l 162 l 194 l 221 l 362 l 225 l 175 l 174 l 491 l 493

16

Contents by Function

Exposure [Exposure Comp.] Program Shift Preview mode [Metering Mode] AE Lock [One Push AE] [Touch AE] [Sensitivity] [Extended ISO] Flash External flash [Firing Mode] [Flash Mode] [Flash Adjust.] [Flash Synchro] [Wireless Flash Setup] Video Recording Video recording [Switch NTSC/PAL] [Image Area of Video] Creative Video mode Slow & Quick mode
[Live Cropping] Log recording (V-Log) HLG video Anamorphic Recording [Time Code] Remote control recording

l 196 l 186 l 195 l 184 l 198 l 325 l 81 l 199 l 371
l 227 l 232 l 229 l 233 l 234 l 236
l 240 l 248 l 249 l 244 l 244 l 269 l 272 l 276 l 280 l 283 l 254 l 491

Display (Video) [Waveform Monitor] [Luminance Spot Meter] [Zebra Pattern] [Frame Marker] Image Quality (Video) [Rec. File Format] [Rec Quality] Resolution Recording frame rate Bit rate [Flicker Decrease (Video)] Exposure (Video) Exposure settings
Luminance level Knee
Audio External microphone XLR Microphone Adaptor Headphones [Sound Output] [Sound Rec Level Disp.] [Sound Rec Level Adj.] Wind noise reduction Attenuator

l 264 l 266 l 267 l 268
l 249 l 250 l 250 l 250 l 250 l 365
l 241 l 247 l 259 l 260
l 293 l 296 l 298 l 298 l 263 l 263 l 263 l 263

17

Contents by Function

Playback [Auto Review] Playing back pictures Playing back videos Thumbnail display Calendar display Enlarged display Group images Saving 6K/4K photos Viewing on a TV Deleting Screen display [Slide Show] Editing of Images [RAW Processing] [Protect] [Rating] [Resize] [Rotate] [Video Divide] [Copy] Customization [Custom] menu Function button Custom recording mode [My Menu] Quick menu Dial operation Saving camera settings

l 382 l 300 l 303 l 308 l 309 l 306 l 310 l 139 l 475 l 311 l 499 l 407
l 312 l 411 l 411 l 412 l 412 l 318 l 413
l 370 l 321 l 337 l 341 l 332 l 330 l 343

Connecting with Other Devices

Sending images (PC)

l 478

Printing

l 486

Viewing on a TV

l 475

HDMI output

l 289 l 476

Tethered recording

l 484

Wi-Fi/Bluetooth Bluetooth connection [Wi-Fi connection] [Wi-Fi Setup] Smartphone app “LUMIX Sync ” [Remote shooting] Location information Sending images ([Smartphone]) Sending images ([PC]) Sending images ([Printer]) Sending images ([Web service]) Sending images ([Cloud Sync. Service]) Saving camera settings “LUMIX CLUB”

l 420 l 424 l 460 l 468 l 418
l 431 l 439 l 435 l 447 l 451 l 454 l 456
l 458
l 442 l 469

Software ” PHOTOfunSTUDIO ” ” SILKYPIX ” “LUMIX Tether”

l 481 l 482 l 484

Maintenance [Sensor Cleaning] [Pixel Refresh]

l 404 l 404

18

1. Introduction
Before Use Firmware of Your Camera/Lens
Firmware updates may be provided in order to improve camera capabilities or to add functionality. For smoother recording, we recommend updating the firmware of the camera/lens to the latest version. 0 For the latest information on the firmware or to download/update the firmware,
visit the following support site: https://panasonic.jp/support/global/cs/dsc/ (English only) 0 To check the firmware version of the camera/lens, attach the lens to the camera and select [Firmware Version] in the [Setup] ([Others]) menu. You can also update the firmware in [Firmware Version]. (l 405) 0 You can also update the firmware from a smartphone. For details, refer to [Help] in “LUMIX Sync”. (l 419) 0 This document provides explanations for camera firmware version 1.0.
Handling of the Camera
When using the camera, take care not to drop it, bump it, or apply undue force. These may cause malfunction or damage to the camera and lens. If sand, dust, or liquid gets on the monitor, wipe it off with a dry soft cloth.
­ Touch operations may be incorrectly recognized. Do not place a hand inside the camera mount. This may cause a failure or damage because the sensor is a precision device. The sensor can move, making a rattling noise, when the camera is shaken while it is off. This is caused by the image stabilizer mechanism in the body. It is not a malfunction.
19

1. Introduction
Splash Resistant
Splash Resistant is a term used to describe an extra level of protection this camera offers against exposure to a minimal amount of moisture, water or dust. Splash Resistant does not guarantee that damage will not occur if this camera is subjected to direct contact with water. In order to minimize the possibility of damage please be sure the following precautions are taken:
­ Splash Resistant works in conjunction with the lenses that were specifically designed to support this feature.
­ Securely close the doors, contact points cover, etc. ­ When the lens or cap is removed or a door is open, do not allow sand, dust, and
moisture to enter inside. ­ If liquid gets on the camera, wipe it off with a dry soft cloth.
Condensation (When the Lens, the Viewfinder or Monitor
is Fogged Up) 0 Condensation occurs when there are temperature or humidity differences. Take care
as this may lead to soiling, mold, and malfunctions in the lens, viewfinder, and monitor. 0 If condensation occurs, turn off the camera and leave it for approx. 2 hours. The fog will disappear naturally when the temperature of the camera becomes close to the ambient temperature.
20

1. Introduction
Be Sure to Perform Trial Recording in Advance
Perform trial recording in advance of an important event (wedding, etc.) to check that recording can be performed normally.
No Compensation Regarding Recording
Please note that compensation cannot be provided in the event that recording could not be performed due to a problem with the camera or a card.
Be Careful with Regard to Copyrights
Under copyright law, you may not use the images and audio you have recorded for other than personal enjoyment without the permission of the copyright holder. Be careful because there are cases where restrictions apply to recording even for the purpose of personal enjoyment.
Also Read “Cautions for Use” (l 516)
21

1. Introduction
Standard Accessories
Check that all the accessories are supplied before using the camera. 0 The accessories and their shape will differ depending on the country or area where
the camera was purchased. For details on the accessories, refer to “Operating Instructions ” (supplied). 0 Digital camera body is referred to as camera in this document. 0 Battery pack is referred to as battery pack or battery in this document. 0 Battery charger is referred to as battery charger or charger in this document. 0 The memory card is optional.
22

Lenses That Can Be Used

1. Introduction

The lens mount of this camera is compliant with the L-Mount standard of Leica Camera AG. It can be used with 35 mm full-frame interchangeable lenses and APS-C size interchangeable lenses of this standard. 0 The interchangeable lenses used in the explanations are designated as follows in
this document.

Types of interchangeable lens

Designation in this document

35 mm full-frame interchangeable lens full-frame lens

APS-C-size interchangeable lens

APS-C lens

0 When there is no distinguishing the type of lens, the explanation will use lens. 0 Refer to catalogs/websites for most current information regarding supported
lenses. https://panasonic.jp/support/global/cs/dsc/ (English only)

0 The angle of view while recording with an APS-C lens is equivalent to the angle of view of a focal length of 1.5k when converted to the focal length of a 35 mm film camera. (If a 50 mm lens is used, the angle of view will be equivalent to a 75 mm lens.)
0 As the image area narrows, the following functions are not available when using an APS-C lens: ­ 6K photo ­ [High Resolution Mode] ­ [Multiple Exposure]

23

1. Introduction
Memory Cards That Can Be Used

You can use the following memory cards with this camera. 0 SD memory card, SDHC memory card, and SDXC memory card are referred to by
the generic name of card in this document.

SD memory card (512 MB to 2 GB)
SDHC memory card (4 GB to 32 GB)
SDXC memory card (48 GB to 128 GB)

The SDHC/SDXC cards supported by card slot 1 and 2 on this camera are different. 0 Card slot 1
­ UHS Speed Class 3 of the UHS-I/UHS-II standard ­ Video Speed Class 90 of the UHS-II standard 0 Card slot 2 ­ UHS Speed Class 3 of the UHS-I standard 0 Operation with the Panasonic cards on the left has been verified.

24

1. Introduction

Cards That Can Be Used Stably with This Camera
When using the following functions, use cards that have the correct SD Speed Class, UHS Speed Class, and Video Speed Class. 0 Speed classes are standards to guarantee the minimum speed necessary for
continuous writing.

[Video Record]

Bit rate of the recording quality

Speed Class

Example of indication

Class 10

72 Mbps

UHS Speed Class 1 or higher

Video Speed Class 10 or higher

100 Mbps to 200 Mbps

UHS Speed Class 3 Video Speed Class 30 or higher

[6K/4K PHOTO]/[Post-Focus] Speed Class
UHS Speed Class 3 Video Speed Class 30 or higher

Example of indication

25

1. Introduction 0 You can prevent the writing and deleting of data by setting the write-protect switch A on the card to “LOCK”. 0 The data stored on a card may be damaged due to electromagnetic waves, static electricity or a failure of the camera or card. We recommend backing up important data. 0 Keep the memory card out of reach of children to prevent swallowing.
26

Names of Parts
Camera

1. Introduction

5

6

7

1

8 9

10

2

11 12

3

13

14

4

15

Stereo microphone (l 263)

1

0 Do not block the microphone with a finger. Audio will be

difficult to record.

2 Drive mode dial (l 128)

Hot shoe (hot shoe cover) (l 227)

3

0 Keep the hot shoe cover out of reach of children to prevent

swallowing.

4 Speaker (l 399)

5 Front dial (l 61)

6 Shutter button (l 59)

7

[WB] (White balance) button (l 202)

8

[ISO] (ISO sensitivity) button (l 199)

9

[ ] (Exposure compensation) button (l 196)

10

Charging light (l 40)/ Wireless connection light (l 416)

11 Video rec. button (l 240)

12

[ ] (Recording distance reference mark) (l 123)

13 Rear dial (l 61)

14 Camera on/off switch (l 54)

15 Mode dial (l 60)

27

1. Introduction

1 2
3

1 [LVF] button (l 66)

2 [(] (Playback) button (l 300)

3

Monitor (l 32, 493)/ Touch screen (l 64)

4 [ ] (AF mode) button (l 94)

5 Focus mode lever (l 93, 94, 120)

6 [AF ON] button (l 95)

Joystick (l 63)/

7

Fn buttons (l 321) Center: Fn8, 3: Fn9, 1: Fn10,

4: Fn11, 2: Fn12

4 5 6 7
8 9
10 11
12 13

8 [Q] (Quick menu) button (l 69)

Cursor buttons (l 62)/

9

Fn buttons (l 321) 3: Fn13, 1: Fn14, 4: Fn15,

2: Fn16

10 Control dial (l 62)

11 [MENU/SET] button (l 62, 73)

12 [DISP.] button (l 67)

[ ] (Cancel) button (l 68, 75)/ 13 [ ] (Delete) button (l 311)/
Fn button (Fn1) (l 321)

28

1. Introduction

1 2
3

4 5

1 Eye cup (l 518)

2 Viewfinder (l 32, 66, 493)

3 Eye sensor (l 66)

Tripod mount (l 523) 0 If you attempt to attach a tripod
with a screw length of 5.5 mm 4 (0.22 inches) or more, you may
not be able to securely fix it in place or it may damage the camera.

Battery grip connector (cover for

the battery grip connector)

5

(l 490) 0 Keep the cover for the battery

grip connector out of reach of

children to prevent swallowing.

6

7

9

10

8

11
12 13

6 [REMOTE] socket (l 491) 7 Card slot 1 (l 46) 8 Card slot 2 (l 46) 9 Card door (l 46) 10 Card access light (l 46)
DC coupler cover (l 492) 0 When using an AC adaptor,
ensure that the Panasonic DC 11 Coupler (DMW-DCC17:
optional) and AC Adaptor (DMW-AC10: optional) are used.
12 Battery door (l 37) 13 Battery door release lever (l 37)

29

1. Introduction

5 1

6 2
7 3
8

4

9

10

11 12 13 14 15 16

1

1 Shoulder strap eyelet (l 33)

2

Preview button (l 195)/ Fn button (Fn2) (l 321)

3 Grip

4 Lens release button (l 49)

5

Self-timer light (l 154)/ AF assist light (l 355)

6 Diopter adjustment dial (l 65)

7 [MIC] socket (l 293)

Headphone socket (l 298)

8

0 Excessive sound pressure from earphones and headphones can

cause hearing loss.

9 [HDMI] socket (l 289, 473) 10 USB port (l 39, 474) 11 Lens fitting mark (l 49) 12 Lens lock pin 13 Sensor 14 Contact points 15 Mount 16 Screw hole for function expansion

30

Supplied Lens
S-R2060

1. Introduction

1

23 4

1 Lens surface

2 Focus ring (l 121)

3 Zoom ring (l 124)

[AF/MF] switch (l 94, 120) 0 You can switch between AF and

4

MF. If [MF] is set on either the lens or

camera, operation will be with

MF.

5 67
5 Contact points 6 Lens mount rubber (l 519) 7 Lens fitting mark (l 49)

0 Recording at or near the closest focusing distance at wide angle will degrade image quality around the edges of the image. We recommend checking each picture after you have taken it when recording.

31

1. Introduction

Viewfinder/Monitor Displays

At the time of purchase, the viewfinder/monitor displays the following icons. 0 For information about the icons other than those described here, refer to page 493.

Viewfinder

Monitor

1 2 34 5 6

7

FINE L

AFS

AFS FINE L

60 F3.5 ±0 ISO100

999

60 F3.5

ISO100

999

8 9 1011 12 13 14 15 16 17

1 Photo Style (l 208)

2 Level gauge (l 391)

3

Picture quality (l 86)/ Picture size (l 85)

4 AF area (l 115)

5 Focus mode (l 93, 120)

6 AF mode (l 100)

7 Image stabilizer (l 177)

8

Focus (green) (l 59, 95)/ Recording state (red) (l 223, 241)

9 Recording mode (l 60)

10 Metering mode (l 184)

11 Shutter speed (l 59)

12 Aperture value (l 59)

Exposure compensation value 13 (l 196)/
Manual Exposure Assist (l 193)

14 ISO sensitivity (l 199)

15

Card slot (l 46)/ Double card slot function (l 88)

Number of still images that can be

16

taken (l 528)/ Number of pictures that can be taken

continuously (l 131)

17 Battery indication (l 42)

0 Press [ ] to switch between display/hide of the level gauge.
32

2. Getting Started

Attaching a Shoulder Strap

Attach a shoulder strap to the camera with the following procedure to prevent it from dropping.

1

2

3

4

0 Pull the shoulder strap and check that it will not come out. 0 Attach the opposite end of the shoulder strap with the same procedure. 0 Use the shoulder strap around your shoulder.
­ Do not wrap the strap around your neck. It may result in injury or accident.
0 Do not leave the shoulder strap where an infant can reach it. ­ It may result in an accident by mistakenly wrapping around the neck.

33

2. Getting Started
Charging the Battery
You can charge the battery either using the supplied charger, or in the camera body. You can also turn on the camera and supply power from an electrical outlet. 0 The battery that can be used with the camera is DMW-BLK22. (As of
September 2020)
0 The battery is not charged at the time of purchase. Charge the battery before use.

Charging with the Charger

Charging time

Approx. 230 min

0 Use the supplied charger and AC adaptor. 0 The indicated charging time is for when the battery has been discharged completely.
The charging time may vary depending on how the battery has been used. The charging time for the battery in hot/cold environments or a battery that has not been used for a long time may be longer than normal.

0 Use the products supplied with the camera for charging. 0 Use the charger indoors.

34

2. Getting Started

3

2

1

1 Connect the charger and the AC adaptor with the USB
connection cable. 0 Check the direction of the terminals and plug in/out straight holding onto the
plug. (Inserting these at an angle may cause deformation or malfunction)
2 Connect the AC adaptor to an electrical outlet. 3 Insert the battery.
0 The charging lights ([CHARGE]) A blink and charging begins.
0 Do not use any other USB connection cables except the supplied one. This may cause malfunction.
0 Do not use any other AC adaptors except the supplied one. This may cause malfunction.

35

2. Getting Started

Charging Lights Indications

Charging status

0 % to 49 % 50 % to 79 %

80 % to 99 %

Charging lights

100 %

A Blinking

B On

C Off

0 When the battery is inserted while the charger is not connected to the power source,

the charging lights turn on for a certain period to allow you to confirm the battery

level.

0 After charging, disconnect the power source connection and remove the battery.
0 If the [50%] light is blinking quickly, then charging is not occurring. ­ The temperature of the battery or surroundings is either too high or too low. Try charging at an ambient temperature between 10 °C and 30 °C (50 oF and 86 oF). ­ The terminals of the charger or the battery are dirty. Remove the connection to the power source, and wipe with a dry cloth.

36

2. Getting Started

Battery Insertion
0 Always use genuine Panasonic batteries (DMW-BLK22). 0 If you use other batteries, we cannot guarantee the quality of this product.
0 Check that the camera on/off switch is set to [OFF].

1

2

3

0 Check that the lever A is holding the battery in place.
Removing the Battery
1 Set the camera on/off switch to [OFF]. 2 Open the battery door.
0 Check that the card access light B is turned off and then open the battery door.
3 Push the lever A in the direction of the arrow and then remove the battery.

37

2. Getting Started 0 Ensure that no foreign objects are adhering to the inner side (cushion) of the battery door. 0 Remove the battery after use. (The battery will drain if left inserted in the camera for a long period of time.) 0 The battery becomes warm after use, during charging, and immediately after charging. The camera also becomes warm during use. This is not a malfunction. 0 Be careful when removing the battery as the battery will jump out.
38

2. Getting Started

Inserting a Battery into the Camera for Charging

Charging time

Approx. 240 min

0 Using the camera body and the supplied AC adaptor. 0 The indicated charging time is for when the battery has been discharged completely.
The charging time may vary depending on how the battery has been used. The charging time for the battery in hot/cold environments or a battery that has not been used for a long time may be longer than normal.

0 Use the products supplied with the camera for charging.

1

3

4

2
1 Set the camera on/off switch to [OFF]. 2 Insert the battery into the camera. 3 Connect the camera USB port and the AC adaptor using
the USB connection cable. 0 Check the direction of the terminals and plug in/out straight holding onto the
plug. (Inserting these at an angle may cause deformation or malfunction)
4 Connect the AC adaptor to an electrical outlet.
0 The charging light A turns red and charging begins.

39

2. Getting Started

Charging Light Indications

Charging light (red)

On:

Charging.

Off:

Charging has completed.

Blinking: Charging error.

0 You can also charge the battery by connecting a USB device (PC, etc.) and the camera with the USB connection cable. Charging may take longer in this case.
0 The battery in the Battery Grip (DMW-BGS5: optional) cannot be charged.
0 Do not use any other USB connection cables except the supplied one. This may cause malfunction.
0 Do not use any other AC adaptors except the supplied one. This may cause malfunction.
0 After charging, disconnect the connection to the power source. 0 While the charging light is blinking red, charging is not possible.
­ The temperature of the battery or surroundings is either too high or too low. Try charging at an ambient temperature between 10 °C and 30 °C (50 oF and 86 oF).
­ The terminals of the battery are dirty. Remove the battery and wipe off the dirt with a dry cloth.
0 Even when the camera on/off switch is set to [OFF] thus turning the camera off, it consumes power. When the camera will not be used for a long time, remove the power plug from the electrical outlet in order to save power.

40

2. Getting Started
Power Supply
When the battery is inserted into the camera for charging and the camera is turned on, you can record while the camera is being supplied with power. 0 [ ] is displayed in the screen while power is being supplied.
0 You can also supply power by using a USB connection cable to connect the camera and a USB device (PC, etc.).
0 The battery cannot be charged while power is being supplied. 0 Turn off the camera before connecting or disconnecting the AC adaptor. 0 Remaining charge in the battery may decrease depending on usage
conditions. When the battery level is depleted, the camera will turn off. 0 If the temperature of the camera rises, [ ] may be displayed, recording may
stop, and some functions may become unavailable temporarily. Wait until the camera cools down. 0 Depending on the power supply capabilities of the connected device, it may not be possible to supply power. 0 USB power supply can be turned off: [ ] ¨ [ ] ¨ [USB] ¨ [USB Power Supply] (l 400)
41

2. Getting Started

Notifications Regarding Charging/Power Supply

Power Indications

Indication on monitor

A USB connection cable supplying power
B Battery indication C Using the battery in the Battery Grip

80 % or higher 60 % to 79 % 40 % to 59 % 20 % to 39 % 19 % or below

Blinking

Low battery 0 Charge or replace the battery.

0 The battery level indicated on the screen is approximate. The exact level varies depending on the environment and the operating conditions.

42

2. Getting Started
0 We recommend that genuine Panasonic batteries are used. There is a possibility that the use of non-genuine batteries can cause accidents or malfunctions that may lead to fire or explosion. Please be advised that we are not liable for any accident or failure resulting from the use of non-genuine batteries.
0 Do not leave any metal items (such as clips) near the contact areas of the power plug. Otherwise, a fire and/or electric shocks may be caused by short- circuiting or the resulting heat generated.
0 Do not use the AC adaptor or USB connection cable on other devices. This may cause a malfunction.
0 Do not use USB extension cables or USB conversion adaptors. 0 The battery can be charged even when it still has some charge left, but it is not
recommended that the battery charge be frequently topped up while the battery is fully charged. (Since characteristic swelling may occur.) 0 If there is a power outage or other problem with the electrical outlet, then charging may not complete successfully. Reconnect the power plug. 0 Do not connect to keyboard or printer USB ports, or to USB hubs. 0 If the connected PC enters sleep status, then charging/power supply may stop.
43

2. Getting Started

[Power Save Mode]

This is a function to automatically turn the camera to sleep (power save) status or turn off the viewfinder/monitor if no operation is performed for a set time. Reduces battery consumption.

¨ [ ] ¨ [ ] ¨ Select [Power Save Mode] [Sleep Mode] Sets the amount of time until the camera is put to sleep.

[Sleep Mode(Wi-Fi)]

Sets the camera to sleep 15 minutes after being disconnected from Wi-Fi.

[Auto LVF/ Monitor Off]

Sets the amount of time it takes for the viewfinder/monitor to turn off. (The camera is not turned off.)

Puts the camera to sleep when the recording screen is being displayed on the monitor when automatic viewfinder/monitor switching is active.

[Power Save LVF Shooting] [Time to Sleep] [Method of Activation]

Sets the amount of time until the camera is put to sleep.
Sets the screen where the camera is put to sleep. [Only Control Panel]: Puts the camera to sleep only when the control panel (l 67) is displayed. [While Recording Standby]: Puts the camera to sleep from any screen during recording standby.

0 To recover from [Sleep Mode], [Sleep Mode(Wi-Fi)], or [Power Save LVF Shooting], perform one of the following operations: ­ Press the shutter button halfway. ­ Set the camera on/off switch to [OFF] and then [ON] again.
0 To recover from [Auto LVF/Monitor Off], press any button.

44

2. Getting Started 0 [Power Save Mode] is not available in the following cases:
­ While connected to a PC or printer ­ During video recording/video playback ­ When recording with [6K/4K Pre-Burst] ­ During a [Time Lapse Shot] ­ When recording with [Stop Motion Animation] (when [Auto Shooting] is set) ­ When recording with [Live View Composite] ­ When recording with [Multiple Exposure] ­ During a [Slide Show] ­ During HDMI output for recording
45

2. Getting Started
Inserting Cards (Optional)
This camera supports the double card slot function. When two cards are used, relay recording, backup recording, and allocation recording are available.

1

2

3

A Card slot 1 (compatible with UHS-I/UHS-II) B Card slot 2 (compatible with UHS-I)
0 Match the orientation of the cards as shown in the figure and then insert them firmly until they click.

0 You can set the way to record to card slots 1 and 2: [ ] ¨ [ ] ¨ [Double Card Slot Function] (l 88)

Card Access Indications
The card access light turns on while the card is being accessed.

46

Removing a Card
1 Open the card door. 0 Check that the card access light A is
turned off and then open the card door.
2 Push the card until it clicks and then pull the card out straight.

2. Getting Started

0 The card may be warm just after the camera has been used. 0 Do not perform the following operations during access.
The camera may operate incorrectly or the card and recorded images may be damaged. ­ Turn off the camera. ­ Remove the battery or card or disconnect the power plug. ­ Subject the camera to vibration, impacts, or static electricity.

47

2. Getting Started
Formatting Cards (Initialization)
Format the cards with the camera before use. 0 When a card is formatted, all of the data stored in the card is erased and cannot be restored. Save a backup of necessary data before formatting the card. ¨ [ ] ¨ [ ] ¨ Select [Card Format] Settings: [Card Slot 1]/[Card Slot 2] 0 Do not turn off the camera or perform another operation during formatting. 0 Take care not to turn off the camera while formatting is in progress. 0 If the card has been formatted with a PC or other device, format it again with the camera. 0 You can format the card while keeping the camera settings information stored on the card: [ ] ¨ [ ] ¨ [Save/Restore Camera Setting] ¨ [Keep Settings While Format] (l 343)
48

Attaching a Lens

2. Getting Started

You can attach the Leica Camera AG L-Mount standard lens to this camera. For information about the lenses that can be used, refer to page 23.

0 Check that the camera on/off switch is set to [OFF]. 0 Change the lens in a location where there is not a lot of dirt and dust. If dirt or
dust gets on the lens, refer to page 517. 0 Change the lens while the lens cap is attached.

1

2

3

0 When removing the body cap, rotate it while pressing the lens release button A. B Lens fitting marks
Removing a Lens
0 While pressing the lens release button A, rotate the lens in the direction of the arrow until it stops and then remove it.

49

2. Getting Started 0 When you have attached a lens that does not have a communication function with this camera, after turning on the camera, a message asking for confirmation of the focal length setting is displayed. You can register the focal length of the lens when you select [Yes]. (l 183) 0 Insert the lens straight in. Inserting this at an angle to attach it may damage the camera lens mount. 0 After removing the lens, be sure to attach the body cap and the lens rear cap.
50

2. Getting Started
Attaching a Lens Hood
For recording against strong backlight, a lens hood can reduce the inclusion of unwanted light in images and drop in contrast resulting from the irregular reflection of light that occurs within the lens. It allows you take more beautiful pictures by cutting out excess light. When attaching the lens hood (flower shape) supplied with the interchangeable lens (S-R2060) Hold the lens hood by placing your fingers as shown in the figure. 0 Do not hold the lens hood in such a way
that it will become bent.
1 Align mark A ( ) on the
lens hood with the mark on the tip of the lens.
2 Rotate the lens hood in the
direction of the arrow to align mark B ( ) on the lens hood with the mark on the tip of the lens. Attach the lens hood by rotating it
until it clicks.
51

2. Getting Started
Removing the Lens Hood
While pressing the lens hood button A, rotate the lens hood in the direction of the arrow and then remove it.

0 The lens hood can be attached in the reverse direction when carrying the camera.
1 Align mark B ( ) on the lens hood with the mark on the tip of the lens. 2 Attach the lens hood by rotating it in the direction of the arrow until it clicks.

52

2. Getting Started
Adjusting the Monitor Direction and Angle
At the time of purchase, the monitor is stowed in the camera body.

1

2

3

180°

90°

180°

0 The angles of adjustment are guides only. 0 Do not apply an excessive force to the monitor. This may cause damage or
malfunction. 0 When not using the camera, close the monitor with the monitor surface facing
in.

53

2. Getting Started
Setting the Clock (When Turning On for the First Time)
When you turn the camera on for the first time, a screen to set the time zone and clock appears. Be sure to set these settings before use to ensure images are recorded with the correct date and time information.
1 Set the camera on/off switch
to [ON]. If the language select screen is not
4 displayed, proceed to Step .

2 When [Please set the language] appears, press or
.
3 Set the language.
Press 34 to select the language and then press or .
4 When [Please set the time zone] appears, press or
.
5 Set the time zone.
Press 21 to select the time zone and then press or .

0 If you are using Daylight Savings

[

], press 3. (The time will

move forward by 1 hour.)

To return to the normal time, press

3 again.

A Time difference from GMT (Greenwich Mean Time)

54

2. Getting Started

6 When [Please set the clock] appears, press 7 Set the clock.
21: Select an item (year, month, day, hour, minute, or second).
34: Select a value.

or .

To set the display order B and time display format C Press 21 to select [Style] and
then press or to display the screen for setting the display order and time display format.
8 Confirm your selection.
Press or .

9 When [The clock setting has
been completed.] appears, press

or .

55

2. Getting Started 0 If the camera is used without setting the clock, it will be set to 0:00:00, 1st January 2020. 0 Clock settings are maintained for approx. 3 months using the built-in clock battery even without the battery. (Leave the fully-charged battery in the camera for approx. 24 hours to charge the built-in battery.) 0 [Time Zone] and [Clock Set] can be changed from the menu: ­ [ ] ¨ [ ] ¨ [Time Zone] (l 404) ­ [ ] ¨ [ ] ¨ [Clock Set] 56

3. Basic Operations
Basic Recording Operations
How to Hold the Camera
To minimize camera shake, hold the camera so that it will not move during recording. Hold the camera with both hands, keep your arms still at your side, and stand with your feet shoulder width apart. Hold the camera firmly by wrapping your right hand around the camera
grip. Support the lens from below with your left hand. 0 Do not cover the AF assist light A or microphone B with your fingers or other
objects.
57

3. Basic Operations
Vertical Orientation Detection Function
This function detects when pictures were recorded with the camera held vertically orientated. With the default settings, pictures are automatically played back vertically oriented. 0 If you set [Rotate Disp.] to [OFF], pictures will be
played back without being rotated. (l 407) 0 When the camera is tilted significantly up or down, the vertical orientation detection function may not work correctly. 0 Images recorded using the following functions are played back vertically oriented only when displayed in thumbnail format: ­ Video recording/[6K/4K PHOTO]/[Post-Focus] 58

Recording
1 Adjust the focus.
Press the shutter button halfway (press it gently).

3. Basic Operations

The aperture value A and shutter speed B are displayed. (When the correct exposure cannot be obtained, the indications blink in red.)
Once the subject is in focus, the focus icon C lights. (When the subject is not in focus, the icon blinks.)

60 F3.5

0 You can also perform the same operation by pressing [AF ON].
2 Start recording.
Press the shutter button fully (press it further).
When recording videos, press the video rec. button. (l 240)

59

3. Basic Operations
0 Recorded pictures can be displayed automatically by setting [Auto Review] of the [Custom] ([Monitor / Display (Photo)]) menu. You can also change the picture display duration to your preferred setting. (l 382)
0 With the default settings, you cannot take a picture until the subject is brought into focus. If you set [Focus/Shutter Priority] in the [Custom] ([Focus/Shutter]) menu to [BALANCE] or [RELEASE], you will be able to take a picture even when the subject is not in focus. (l 373)
Selecting the Recording Mode
Rotate the mode dial to select the recording mode.

[iA] [P] [A] [S] [M] [] [S&Q] [C1]/[C2]/[C3]

Intelligent Auto mode (l 77) Program AE mode (l 185) Aperture-Priority AE mode (l 187) Shutter-Priority AE mode (l 190) Manual Exposure mode (l 192) Creative Video mode (l 244) Slow & Quick mode (l 269) Custom mode (l 337)

60

Camera Setting Operations

3. Basic Operations

When changing the camera settings, operate the camera using the following operation parts.

A Front dial (l 61) B Rear dial (l 61) C Control dial (l 62) D Cursor buttons (l 62) E [MENU/SET] button (l 62) F Joystick (l 63) G Touch screen (l 64)

Front Dial ( )/Rear Dial ( )
Rotate: Selects an item or numeric value.

61

3. Basic Operations
Control Dial ( )
Rotate: Selects an item or numeric value.
Cursor Buttons (3421)
Press: Selects an item or numeric value.
[MENU/SET] Button ( )
Press: Confirms a setting. 0 Displays the menu during recording and
playback.
62

3. Basic Operations

Joystick (3421/ )
The joystick can be operated in 4 directions by tilting it up, down, left and right and by pressing the center part.

A Tilt: Selects an item or numeric value, or

moves a position. 0 Place your finger on the center of the joystick

before tilting. The joystick may not work as

expected when the sides are pressed. B Press: Confirms a setting.

0 You can register [Operation Lock] to the Fn button to disable the operations of
operating parts: [ ] ¨ [ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Operation Lock] (l 321)

63

3. Basic Operations

Touch Screen
Operations can be performed by touching the icons, slide bars, menus, and other items displayed on the screen.

A Touch

Operation of touching and then lifting your

finger from the touch screen.

B Drag

Operation of moving a finger while it

touches the touch screen.

C Pinch (widen/narrow)

Operations of widening the distance

between two fingers (pinch out) and

narrowing the distance between two fingers

(pinch in) while they are touching the touch

screen.

0 If you will use a commercially available monitor protection sheet, observe the precautions for the sheet. (Visibility and operability may be impaired depending on the type of monitor protection sheet.)
0 Touch operations can be disabled: [ ] ¨ [ ] ¨ [Touch Settings] (l 377)

64

3. Basic Operations
Monitor/Viewfinder Display Settings
Setting the Viewfinder
Adjusting the Viewfinder Diopter
Rotate the diopter adjustment dial while looking through the viewfinder. 0 Adjust until you can clearly see the text on the
viewfinder.
65

3. Basic Operations
Switching Between the Monitor and Viewfinder
With the default settings, automatic viewfinder/monitor switching is set. When you look through the viewfinder, the eye sensor A works and the camera switches from monitor display to viewfinder display. You can switch to viewfinder display or monitor display with [LVF] button B.
Press [LVF].

Automatic viewfinder/ monitor switching

Viewfinder display

Monitor display

0 The eye sensor may not work correctly due to the shape of eyeglasses, the way the camera is held, or bright light shining around the eyepiece.
0 During video playback or slide show, automatic viewfinder/monitor switching does not work.
0 To focus when looking through the viewfinder: [ ] ¨ [ ] ¨ [Eye Sensor AF] (l 376)
0 The sensitivity of the eye sensor can be changed: [ ] ¨ [ ] ¨ [Eye Sensor] (l 398)
66

Switching the Display Information
Press [DISP.]. The display information is switched.

3. Basic Operations

Recording Screen

Monitor With information
AFS FINE L

Without information

±0

ISO AUTO

999

Control panel Turned off (black)

ISO
AUTO
AFS
AWB

0
0
3:2 FINE

0
Fn 999 999

Viewfinder

With information

FINE L

AFS

Without information

999

67

3. Basic Operations

0 Press [ ] to switch between display/hide of the level gauge. This can also be set by using [Level Gauge]. (l 391)
0 Control panel operation (l 71) 0 You can hide the control panel and black screen:
[ ] ¨ [ ] ¨ [Show/Hide Monitor Layout] (l 391) 0 The display can be changed so that live view and display information do not
overlap: [ ] ¨ [ ] ¨ [LVF/Monitor Disp. Set] (l 387)

Playback Screen

With information

Detailed
information display¢1

2020.12.1 10:00 100-0001 1/999

60 F3.5 ±0 ISO100

FINE L

ISO 100
60

AFS

1/5

3:2
L

FINE sRGB

STD. AWB 0

F3.5

2020.12. 1 10:00 100-0001

Without information

Without blinking highlights¢2

¢1 Pressing 34 switches the display information. (l 501) ¢2 This is a screen without blinking highlights display that is shown when [Blinking
Highlights] of the [Custom] ([Monitor / Display (Photo)]) menu is set to [ON]. In other than this screen, overexposed parts of the screen will blink. (l 389)

68

Quick Menu

3. Basic Operations

This menu enables you to quickly set functions that are frequently used during recording without calling up the menu screen. You can also change the Quick menu display method and the items to display.
1 Display the Quick menu.
Press [Q].

2 Select a menu item.
Press 3421. Selection is also possible by
rotating . Selection is also possible by
touching a menu item.
3 Select a setting item.
Rotate or . Selection is also possible by
touching a setting item.
4 Close the Quick menu.
Press the shutter button halfway. You can also close the menu by
pressing [Q].

ISO
AWB AUTO

0

0

0

0

0

0

3:2

ISO
AWB AUTO

0

0

0

0

0

0

3:2

69

3. Basic Operations 0 Some items cannot be set depending on the recording mode or camera settings. 0 The Quick menu can be customized: [ ] ¨ [ ] ¨ [Q.MENU Settings] (l 332)
70

Control Panel

3. Basic Operations

This screen allows you to view the current recording settings on the monitor. You can also touch the screen to change the settings.

1 Display the control panel.
Press [DISP.] several times.
2 Touch the items.
The setting screens for each of the items are displayed.
3 Change the setting.
Example) Changing the AF mode Touch the setting item.

ISO
AUTO
AFS
AWB

0
0
3:2
FINE

0
Fn 999 999

0 Refer to the pages explaining each item for information on how to change the settings.
4 Touch [Set].

71

3. Basic Operations

Changing Directly Using the Dial 2 4 Steps to can also be changed using the
following operations.
1 Press one of 3421 to enable selection of items. 0 Selected items are displayed in yellow.
2 Press 3421 to select an item. 0 Selection is also possible by rotating or .
3 Rotate to change the settings values.

ISO
AUTO
AFS
AWB
ISO
AUTO
AFS
AWB

0
0
3:2
FINE
0
0
3:2
FINE

0 Some items cannot be set depending on the recording mode or camera settings.

72

Menu Operation Methods

3. Basic Operations

In this camera, the menu is used for setting a wide variety of functions and performing camera customizations. Menu operations can be performed using the cursors, joystick, dial, or by touch.
Configuration and operation parts of the menu The menu can be operated by pressing 21 to move between menu screens. Direct operation of the main tabs, sub tabs, page tabs, and menu items is also possible without moving through the different menu levels by using the operation parts indicated in the parentheses below. 0 You can also operate by touching the icons, menu items, and setting items. A Main tabs ([Q] button) B Sub tabs ( ) C Menu items ( ) D Page tabs ( ) E Setting items

1 Display the menu.
Press .

73

3. Basic Operations
2 Select a main tab.
Press 34 to select a main tab and then press 1.
You can also perform the same operation by rotating to select the main tab and then pressing or .
3 Select a sub tab.
Press 34 to select a sub tab and then press 1.
You can also perform the same operation by rotating to select the sub tab and then pressing or .
0 If there are page tabs A, then after the page tabs have finished switching, the next sub tab is switched to.
4 Select a menu item.
Press 34 to select a menu item and then press 1.
You can also perform the same operation by rotating to select the menu item and then pressing or .
74

5 Select a setting item and then
confirm your selection. Press 34 to select a setting item
and then press or . You can also perform the same
operation by rotating to select the setting item and then pressing
or .
6 Close the menu.
Press the shutter button halfway. You can also close the menu by
pressing [ ] several times.

3. Basic Operations

0 For details about menu items, refer to Menu Guide. (l 344)
Displaying Descriptions About Menu Items and Settings
If you press [DISP.] while a menu item or setting item is selected, a description about the item is displayed on the screen.

75

3. Basic Operations
Grayed Out Menu Items
Menu items that cannot be set are displayed grayed out. If you press or while a grayed out menu item is selected, the reason why it cannot be set is displayed. 0 The reason why a menu item cannot be set may
not be displayed depending on the menu item.
[Reset] Return each of the following settings to the default setting: ­ Recording settings ­ Network settings (settings of [Wi-Fi Setup] and [Bluetooth]) ­ Setup and custom settings (other than [Wi-Fi Setup] and [Bluetooth])
¨ [ ] ¨ [ ] ¨ Select [Reset] 0 If the setup and custom settings are reset, the [Playback] menu is also reset. 0 The folder numbers and clock settings are not reset. 0 List of default settings and settings that can be reset (l 531)
76

Intelligent Auto Mode

3. Basic Operations

The [iA] mode (Intelligent Auto mode) can record images using settings automatically selected by the camera. The camera detects the scene to set the optimal recording settings automatically to match the subject and recording conditions.
1 Set the mode dial to [iA].

2 Aim the camera at the subject.
When the camera detects the scene, the recording mode icon changes. (Automatic Scene Detection)
3 Adjust the focus.
Press the shutter button halfway. Once the subject is in focus, the
focus icon lights. (When the subject is not in focus, the icon blinks.) 0 [ ] of the AF mode works and the AF area is displayed aligned to any humans.
77

3. Basic Operations
4 Start recording.
Press the shutter button fully.
0 Backlight compensation operates automatically to prevent subjects from appearing dark when there is a backlight.
Types of Automatic Scene Detection
: Scenes detected during picture taking : Scenes detected during video recording

: i-Portrait

: i-Portrait & Animal¢1

: i-Scenery

: i-Macro

: i-Night Portrait¢2

: i-Night Scenery

: i-Food

: i-Sunset

:

:

i-Low Light

¢1 Detected when animal detection is enabled. (l 103) ¢2 Detected when using an external flash.

78

3. Basic Operations

0 If none of the scenes are applicable, recording is with [ ] (standard setting). 0 Different scene types may be selected for the same subject depending on the
recording conditions.

AF Mode
Changing the AF mode. 0 Each press of [ ] changes the AF mode.

[ ]/[ ] ([Face/Eye/ Body/Animal
Detect.])
[] ([Tracking])

The camera detects a person’s face, eyes,

and body (entire body or upper half of the

body) and the body of animals, and adjusts

the focus.

0 Each press of

switches the person,

animal or eye to be brought into focus. It

cannot be switched by touching.

0 Animal detection will maintain the enable/disable setting selected

during other than [iA] mode.

When the focus mode is set to [AFC], the AF area follows the movement of the subject, maintaining focusing.

Aim the AF area over the subject and then press and hold the shutter button halfway. 0 The camera will track the subject while the shutter button is
pressed halfway or fully.

0 For information about AF modes, refer to page 102 and 105.
Flash
When recording using a flash, the camera switches to the appropriate flash mode for the recording conditions. When Slow Sync. ([ ], [ ]), be careful with regard to camera shake because the shutter speed becomes slow.

0 When [ ] or [ ], Red-Eye Removal works. 0 For information about external flashes, refer to page 227.

79

3. Basic Operations
Recording Using Touch Functions
Touch AF/Touch Shutter
Touch functions allow you to focus on the point that you touch, release the shutter, etc.
0 With the default settings, the Touch Tab is not displayed. Set [Touch Tab] to [ON] in [Touch Settings] in the [Custom] ([Operation]) menu. (l 377)
1 Touch [ ]. 2 Touch the icon.
The icon switches each time you AF touch it.

(Touch AF) (Touch Shutter)
(OFF)

Focus on the touched position. Record with focus on the point touched.
s

3 (When set to anything other
than OFF) Touch the subject.

80

3. Basic Operations
0 When the Touch Shutter fails, the AF area first turns red and then disappears. 0 Refer to “Operations on the AF area movement screen” on page 104 for
information about operations to move the AF area. 0 It is also possible to optimize the focus and brightness on the touched
position: [ ] ¨ [ ] ¨ [Touch Settings] ¨ [Touch AF] ¨ [AF+AE] (l 116)
Touch AE
This function adjusts the brightness according to a touched position. When a subject’s face appears dark, you can make the screen brighter to match the face.
0 With the default settings, the Touch Tab is not displayed. Set [Touch Tab] to [ON] in [Touch Settings] in the [Custom] ([Operation]) menu. (l 377)
1 Touch [ ]. 2 Touch [ AE ].
The Touch AE settings screen AF appears.
81

3. Basic Operations

3 Touch the subject to which

you wish to adjust the

brightness.

0 To return the position to which to adjust

the brightness to the center, touch

[Reset].
4 Touch [Set].

5HVHW

6HW

How to Disable Touch AE
Touch [ ].

0 When the following function is being used, Touch AE is not available: ­ [Live Cropping] 0 You can also adjust both the focus and brightness to those of the position you touch. (At this time, Touch AE is not available): [ ] ¨ [ ] ¨ [Touch Settings] ¨ [Touch AF] ¨ [AF+AE] (l 116)

82

4. Image Recording
[Aspect Ratio]

You can select the image aspect ratio.

¨ [ ] ¨ [ ] ¨ Select Aspect Ratio [3:2] [16:9] [1:1] [65:24] [2:1]

Aspect ratio of a 4:3 monitor Aspect ratio of a standard film camera Aspect ratio of a 16:9 TV Square aspect ratio
Panoramic aspect ratio

83

4. Image Recording
0 [16:9] and [1:1] aspect ratios are not available when using the following functions: ­ 6K photo ­ [Post-Focus] (when set to [6K 18M])
0 [65:24] and [2:1] aspect ratios are not available when using the following functions: ­ [iA] mode ­ Taking burst pictures ­ [6K/4K PHOTO]/[Post-Focus] ­ [Time Lapse Shot] ­ [Stop Motion Animation] ­ [HLG Photo] ­ [High Resolution Mode] ­ [Filter Settings] ­ [Live View Composite] ­ [Multiple Exposure] 0 When using APS-C lenses, [65:24] and [2:1] are not available. 0 A frame for trimming (cropping) can be displayed on the recording screen:
[ ] ¨ [ ] ¨ [Frame Marker] (l 268)
84

[Picture Size]

4. Image Recording

Sets the picture’s image size. The image size varies depending on the [Aspect Ratio] or the lens used. When an APS-C lens is used, the image area switches to the one for APS-C, thereby narrowing the angle of view.

¨ [ ] ¨ [ ] ¨ Select [Picture Size] Aspect Ratio [3:2] [16:9] [1:1] [65:24] [2:1] [Picture Size]

When using full-frame lenses

When using APS-C lenses

[L] (21.5M)

5328k4000

[L] (9.5M)

3536k2656

[M] (10.5M)

3792k2848

[M] (5M)

2560k1920

[S] (5.5M)

2688k2016

[S] (2.5M)

1840k1376

[L] (24M)

6000k4000

[L] (10.5M)

3984k2656

[M] (12M)

4272k2848

[M] (5.5M)

2880k1920

[S] (6M)

3024k2016

[S] (3M)

2064k1376

[L] (20M)

6000k3368

[L] (9M)

3984k2240

[M] (10M)

4272k2400

[M] (4.5M)

2880k1624

[S] (5M)

3024k1704

[S] (2M)

1920k1080

[L] (16M)

4000k4000

[L] (7M)

2656k2656

[M] (8M)

2848k2848

[M] (3.5M)

1920k1920

[S] (4M)

2016k2016

[S] (2M)

1376k1376

[L] (13M)

6000k2208

s

[L] (18M)

6000k3000

s

0 When [Ex. Tele Conv.] is set, the [M] and [S] image sizes are indicated with [ ].

0 When the following functions are being used, [Picture Size] is not available: ­ [6K/4K PHOTO]/[Post-Focus] ­ [RAW] ([Picture Quality]) ­ [High Resolution Mode] ­ [Multiple Exposure] 85

4. Image Recording
[Picture Quality]

Set the compression rate used for storing pictures.

¨ [ ] ¨ [ ] ¨ Select [Picture Quality]

Setting [FINE] [STD.] [RAWiFINE] [RAWiSTD.] [RAW]

File format JPEG
RAWiJPEG RAW

Settings details JPEG images that give priority to image quality. JPEG images of standard image quality. This is useful for increasing the number of recordable pictures without changing the picture size.
This records RAW and JPEG images ([FINE] or [STD.]) simultaneously.
This records RAW images.

86

4. Image Recording
Note on RAW RAW format refers to a data format of images that have not been processed on the camera. Playback and editing of RAW images require the camera or the dedicated software. 0 You can process RAW images on the camera. (l 312) 0 Use software (“SILKYPIX Developer Studio” by Ichikawa Soft Laboratory) to
process and edit RAW files on a PC. (l 482) 0 Pictures taken with [RAW] cannot be displayed enlarged to the maximum
magnification during playback. Take pictures with [RAWiFINE] or [RAWiSTD.] if you want to check their focus on the camera after recording. 0 RAW images are always recorded in the [L] size of the [3:2] aspect ratio. 0 When you delete an image recorded with [RAWiFINE] or [RAWiSTD.] on the camera, both the RAW and JPEG images will be deleted simultaneously. 0 When the following functions are being used, [Picture Quality] is not available: ­ [6K/4K PHOTO]/[Post- Focus] ­ [High Resolution Mode] ­ [Multiple Exposure] 87

4. Image Recording
[Double Card Slot Function]

This sets the way recording to the card slots 1 and 2 is performed.

¨ [ ] ¨ [ ] ¨ Select [Double Card Slot Function] [Recording Method] [Relay Rec] [Backup Rec] [Allocation Rec]

Selects the priority of card slots for recording.

]/[

]

Relays recording to the card in the other card

slot after the first card runs out of free space.

Records the same images to both cards simultaneously.

Allows you to specify the card slot to be used for recording for different image formats. [JPEG/HLG Photo Destn.]/[RAW Destination]/ [6K/4K Photo Destination]/[Video Destination]

Notes about Backup Recording 0 We recommend using cards with the same Speed Class rating and capacity.
If the card Speed Class or capacity is insufficient when video recording, recording to both cards stops. 0 When using the following combinations of cards, backup recording for videos, 6K/4K photos, and [Post-Focus] are not available: ­ SD/SDHC memory card, and SDXC memory card

88

[Folder / File Settings]

4. Image Recording

Set the folder and file name where to save the images.

Folder name

File name

100ABCDE

PABC0001.JPG

1 Folder number (3 digits, 100 to 999) 2 5-character user-defined segment

3 Color space
([P]: sRGB, [ _ ]: AdobeRGB) 4 3-character user-defined segment 5 File number (4 digits, 0001 to 9999) 6 Extension

¨ [ ] ¨ [ ] ¨ Select [Folder / File Settings] [Select Folder]¢
[Create a New Folder]

Selects a folder for storing images.

Creates a new folder with an incremented folder number. 0 If there are no recordable folders in the card, a screen for
resetting the folder number is displayed.

[OK]

Increments the folder number without changing the 5-character user-defined segment (2 above).

[Change]

Changes the 5-character user-defined segment (2 above). This will also increment the folder number.

[File Name Setting] [Folder Number
Link] [User Setting]

Uses the 3-character user-defined segment (4 above) to set the folder number (1 above).
Changes the 3-character user-defined segment (4 above).

¢ When [Double Card Slot Function] is set to [Allocation Rec], [Select Folder (Slot 1)] and [Select Folder (Slot 2)] will be displayed.
0 Follow the steps on page 415 when the character entry screen is displayed. Available characters: alphabetic characters (upper-case), numerals, [ _ ]

89

4. Image Recording
0 Each folder can store up to 1000 files. 0 File numbers are assigned sequentially from 0001 to 9999 in the order of
recording. If you change the storage folder, a number continuing on from the last file number will be assigned. 0 In the following cases, a new folder with an incremented folder number will be created automatically when the next file is saved: ­ The number of files in the current folder reaches 1000. ­ The file number reaches 9999. 0 New folders cannot be created when there are folders numbered from 100 all the way up to 999. We recommend backing up your data and formatting the card. 0 [Select Folder] is not available when [Backup Rec] in [Double Card Slot Function] is being used.
90

[File Number Reset]

4. Image Recording

Refresh the folder number to reset the file number to 0001.
¨ [ ] ¨ [ ] ¨ Select [File Number Reset] Settings: [Card Slot 1]/[Card Slot 2]

0 When the folder number reaches 999, the file number cannot be reset. We recommend backing up your data and formatting the card.
0 To reset the folder number to 100: 1 Perform [Card Format] to format the card. (l 48) 2 Perform [File Number Reset] to reset the file number.
3 Select [Yes] on the folder number reset screen.

91

5. Focus/Zoom

Smoother focusing is possible by selecting the focus mode and AF mode most suited to the recording conditions and the subject. It is also possible to customize the AF tracking features with [AFC].

Select the focus mode. [AFS] [AFC] [MF] Select the AF mode.

0 [AF Custom Setting(Photo)] (l 98)
AFS These focus on the subject the AFC camera automatically selected.

l 93 l 120

AFS
AFC These focus on the specified AF area.

AFS AFC
Move the position of the AF area.

This keeps tracking and focusing on subject.

Joystick

Touch operation

Touch pad

l 100
l 115 l 116 l 118

92

Selecting the Focus Mode

5. Focus/Zoom

Select the focusing method (focus mode) to match subject movement. Set the focus mode lever.

[S] ([AFS])
[C] ([AFC])
[MF]

This is suitable for recording still subjects. When the shutter button is pressed halfway, the camera focuses once. The focus stays locked while the shutter button is pressed halfway.
This is suitable for recording moving subjects. While the shutter button is pressed halfway, the focus is constantly adjusted according to the movement of the subject. 0 This predicts the movement of the subject, maintaining focusing.
(Movement prediction)
Manual focusing. Use this when you want to fix the focus or avoid activating AF. (l 120)

0 In the following cases, [AFC] works the same as [AFS] when the shutter button is pressed halfway: ­ [ ] mode ­ [S&Q] mode ­ In low light situations
0 When the following functions are being used, [AFC] switches to [AFS]: ­ [65:24]/[2:1] ([Aspect Ratio]) ­ [High Resolution Mode] 0 This function is not available for Post-Focus recording.

93

5. Focus/Zoom
Using AF
AF (Auto Focus) refers to automatic focusing. Select the focus mode and the AF mode appropriate for the subject and scene.
1 Set the focus mode to [S] or
[C]. Set the focus mode lever. (l 93)

2 Select the AF mode.
Press [ ] to display the AF mode selection screen, and set using or . (l 100)
Selection is also possible by pressing [ ].
0 In [iA] mode, each press of [ ] switches between [
3 Press the shutter button
halfway. The AF operates.

] and [

]. (l 79)

94

5. Focus/Zoom

Focus icon A AF area B AF beep

In focus Lights Green
Two beeps

Focus

Not in focus Blinking Red —

Low illumination AF 0 In dark environments, low illumination AF automatically operates, and the focus icon
is indicated as [ LOW ]. 0 Achieving focus may take more time than usual.
Starlight AF 0 If the camera detects stars in the night sky after determining low illumination AF, then
Starlight AF will be activated. When focus is achieved, the focus icon will display [ STAR ], and the AF area will be displayed on the area in focus. 0 Edges of the screen cannot detect Starlight AF.
[AF ON] button
You can also activate AF by pressing [AF ON].

95

5. Focus/Zoom
Subjects and recording conditions that make focusing difficult with AF mode ­ Fast-moving subjects ­ Extremely bright subjects ­ Subjects without contrast ­ Subjects recorded through windows ­ Subjects near shiny objects ­ Subjects in very dark locations ­ When recording subjects both distant and near 0 You can change the operation of AF-ON so that AF prioritizes subjects close
by. This function is useful when the camera mistakenly focuses on the background: [ ] ¨ [ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [AF-ON : Near Shift] (l 321) 0 You can change the operation of AF-ON so that AF prioritizes subjects far away. This function is useful when taking pictures through fences or nets: [ ] ¨ [ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [AF-ON : Far Shift] (l 321)
0 When the following operations are performed while recording with [AFC], it may take some time for the camera to focus: ­ When zooming from the wide-angle end to the telephoto end ­ When the subject is suddenly changed from one far away to one close by
0 If using the zoom after achieving focus, the focus may be erroneous. In that case, re-adjust the focus.
0 When camera shake reduces, it is possible to focus automatically: [ ] ¨ [ ] ¨ [Quick AF] (l 376)
0 You can change the settings so that AF does not function when the shutter button is pressed halfway: [ ] ¨ [ ] ¨ [Half-Press Shutter] (l 376)
0 The AF beep volume and sound can be changed: [ ] ¨ [ ] ¨ [Beep] ¨ [AF Beep Volume]/[AF Beep Tone] (l 399)
96

5. Focus/Zoom
Magnify the AF Area Position ([AF-Point Scope])

This magnifies the focus point when the AF mode is [ ], [ ], or [ ]. (In

other AF modes, the center of the screen is magnified.)

You can check focus and observe an enlarged subject as with a telephoto

lens.

1 Register [AF-Point Scope] to the Fn button. (l 321) 2 Enlarge the AF area position by pressing and holding the Fn button.

0 When the screen is enlarged, pressing the

shutter button halfway re-acquires focus in

a small central AF area.

0 When the screen is enlarged, turn

or

to adjust the magnification.

Use

for more detailed adjustments.

0 When the screen is enlarged, [AFC] changes to [AFS]. 0 When the following functions are being used, AF-Point Scope does not work:
­ [Post-Focus] ­ [6K/4K Pre-Burst] ­ [65:24]/[2:1] ([Aspect Ratio]) ­ [Miniature Effect] ([Filter Settings]) ­ [Multiple Exposure] ­ [Live Cropping] 0 You can change the display method of the magnified screen: [ ] ¨ [ ] ¨ [AF- Point Scope Setting] (l 376)

97

5. Focus/Zoom
[AF Custom Setting(Photo)]

Select features of AF operation when recording using [AFC] that are appropriate for the subject and scene. Each of these features can be further customized.
1 Set the focus mode to [AFC].
(l 93)
2 Set [AF Custom
Setting(Photo)]. ¨ [ ] ¨ [ ] ¨ [AF Custom
Setting(Photo)] [Set 1] [Set 2] [Set 3] [Set 4]

Basic general-purpose setting.
Suggested for situations where the subject moves at a constant speed in one direction.
Suggested when the subject moves randomly, and other objects may be in the scene.
Suggested for situations where the speed of the subject changes significantly.

0 When the following function is being used, [AF Custom Setting(Photo)] is not available: ­ [6K/4K PHOTO]

98

5. Focus/Zoom

Adjusting AF Custom Settings

1 Press 21 to select the AF Custom setting type. 2 Press 34 to select items and press 21 to adjust.
0 To reset settings to the default, press [DISP.].
3 Press or .

Sets the tracking sensitivity for the movement of subjects.

[AF Sensitivity]

When the distance to the subject changes drastically, the [i] camera re- adjusts the focus immediately. You can bring
different subjects into focus one after another.
When the distance to the subject changes drastically, the camera waits for a short period of time before [j] re-adjusting the focus. This allows you to prevent the focus from being accidentally re-adjusted when, for example, an object moves across the image.

[AF Area Switching Sensitivity]

Sets the sensitivity for switching the AF area to match subject movement. (When in an AF mode where the AF area uses 225-area focusing)
When the subject moves out of the AF area, the camera [i] immediately switches the AF area to keep the subject in
focus.

The camera switches the AF area at a gradual pace. [j] Effects caused by a slight movement of the subject or by
obstacles in front of the camera will be minimized.

[Moving Subject Prediction]

Sets the level of movement prediction for changes in the speed of subject movement. 0 At larger setting values, the camera tries to maintain focus by
responding even to sudden movements of the subject. However, the camera becomes more sensitive to slight movements of the subject, so focusing may become unstable.

[0] This is suited to a subject with minimal changes in speed. [i1] [i2] These are suited to a subject that changes its speed.

99

5. Focus/Zoom
Selecting the AF Mode
Select the focusing method to match the position and number of subjects.
1 Press [ ].
The AF mode selection screen appears.

2 Select the AF mode.
Press 21 to select an item and then press or .
Selection is also possible by pressing [ ].

[Face/Eye/Body/ Animal Detect.]

l 102

[Tracking]

l 105

[225-Area]

l 107

[Zone (Vert./ Horz.)] l 108 [Zone (Square)]¢

l 108

[Zone (Oval)]

l 108

[1-Area+]

l 110

[1-Area]

l 110

[Pinpoint]

l 111

[Custom1]¢, [Custom2]¢, [Custom3]¢

l 113

¢ This is not displayed with the default settings. From [Show/Hide AF Mode] in the [Custom] ([Focus/Shutter]) menu, you can set the items to display on the selection screen. (l 375)

100

5. Focus/Zoom 0 When the following functions are being used, [ ] is not available:
­ [Time Lapse Shot] ­ [Live View Composite] 0 When the focus mode is set to [AFC], [ ] is not available. 0 When the following function is being used, the AF mode is fixed to [ ] (face detection): ­ [Live Cropping] 0 When the following functions are being used, the AF mode is fixed to [ ]: ­ [65:24]/[2:1] ([Aspect Ratio]) ­ [Miniature Effect] ([Filter Settings]) 0 The AF mode cannot be set when using Post-Focus.
101

5. Focus/Zoom

[Face/Eye/Body/Animal Detect.]

The camera detects a person’s face, eyes, and body (entire body or upper half of the body) and adjusts the focus. When animal detection is enabled, animals, such as birds, canines (including wolves), and felines (including lions) will also be detected.

When the camera detects a person’s face A/B or body or an animal’s body C, an AF area is displayed.

Yellow White

AF area to be brought into focus. The camera selects this automatically.
Displayed when multiple subjects are detected.

0 Eye detection works only for the eyes inside the yellow frame A.

0 When a person’s eyes are detected, the eye closer to the camera will be brought into focus. The exposure will be adjusted to the face. (When [Metering Mode] is set to [ ])
0 The camera can detect the faces of up to 15 people. 0 The camera can detect a combined total of up to 3 human and animal bodies. 0 If any humans or animals are not detected, the camera operates as [ ].

102

5. Focus/Zoom

Enable/Disable Animal Detection
1 Press [ ] to display the AF mode selection screen. 2 Select [ ] and then press 3.
0 This enables animal detection, and the icon changes to [ ]. 0 Press 3 again to disable animal detection.

Specify the Person, Animal, or Eye to Bring into Focus
When the person or animal to be brought into focus is shown using the white AF area, you can change this to a yellow AF area.

Touch operation
Touch the person, animal or eye indicated with the white AF area. 0 The AF area will change to yellow. 0 Touching outside the AF area displays the AF
area setting screen. Touch [Set] to set the [ ] AF area at the position touched. 0 To cancel the setting, touch [ ].

Button operation

Press .

0 Each press of

switches the person, animal or eye to be brought into focus.

0 To cancel the settings specified, press .

103

5. Focus/Zoom

Move and Change the Size of the Yellow AF Area
You can move the yellow AF area to the position of the white AF area and replace the white AF area with the yellow AF area. If moving to a position outside an AF area, then the [ ] AF area will be set.

1 Press [ ] to display the AF mode selection screen.

2 Select [ ] or [ ] and then press 4.

3 Press 3421 to move the position of

the AF area.

4 Rotate ,

or to change the

size of the AF area.

5 Press .

0 On the recording screen, press , or

touch [ ] to cancel the AF area setting.

Operations on the AF area movement screen

Button operation 3421
/
[DISP.]

Touch operation
Touch Pinch out/ pinch in
s
[Reset]

Description of operation
Moves the AF area.
Enlarges/reduces the AF area in small steps.
Enlarges/reduces the AF area. First time: Returns the AF area position to the center. Second time: Returns the AF area size to the default setting.

104

5. Focus/Zoom

[Tracking] When the focus mode is set to [AFC], the AF area follows the movement of the subject, maintaining focusing.

Start tracking. Aim the AF area over the subject, and
press the shutter button halfway. The camera will track the subject while the shutter button is pressed halfway or pressed fully.
0 If tracking fails, the AF area blinks red. 0 When set to [AFS], the focus will be on the AF area position. Tracking will not work.

0 In [ ]/[S&Q] mode, while recording video, and while recording with [6K/4K

Burst(S/S)], tracking will continue even if the shutter button is released.

To cancel tracking, press

or , or touch [ ].

Tracking is also available with [AFS].

0 Set [Metering Mode] to [ ] to continue to adjust the exposure as well. 0 In the following, [ ] operates as [Ø]:
­ [Monochrome]/[L.Monochrome]/[L.Monochrome D]/[Monochrome(HLG)] ([Photo Style])
­ [Sepia]/[Monochrome]/[Dynamic Monochrome]/[Rough Monochrome]/[Silky Monochrome]/[Soft Focus]/[Star Filter]/[Sunshine] ([Filter Settings])

105

5. Focus/Zoom
Move the Position of the AF Area
1 Press [ ] to display the AF mode selection screen. 2 Select [ ] and then press 4. 3 Press 3421 to move the position of the AF area.
0 You can also move the AF area by touching. 0 To return the position back to the center, press [DISP.]. 4 Press .
106

5. Focus/Zoom

[225-Area]

The camera selects the most optimal AF area to focus from 225 areas. When multiple AF areas are selected, all selected AF areas will be brought into focus. When the focus mode is set to [AFC], ensuring that the subject stays within the 225 areas during recording will ensure the subject stays in focus.

Specify the [AFC] Start Point
When the focus mode is set to [AFC], you can specify at which area to start [AFC].

1 Set the focus mode to [AFC]. (l 93)

2 Set [AFC Start Point (225-Area)] to [ON].

0

¨ [ ] ¨ [ ] ¨ [AFC Start Point (225-Area)] ¨ [ON]

3 Press [ ] to display the AF mode selection screen.

4 Select [ ] and then press 4.

0 After performing Steps 1 and 2, the icon changes from [ ] to [ ].

5 Press 3421 to move the AF area to the start point.

0 You can also move the AF area by touching.

0 To return the position back to the center, press [DISP.].

6 Press .

107

5. Focus/Zoom

[Zone (Vert./ Horz.)]/ [Zone (Square)]/ [Zone (Oval)] [Zone (Vert./ Horz.)] Within the 225 AF areas, vertical and horizontal zones can be focused.

Horizontal pattern

Vertical pattern

[Zone (Square)] Within the 225 AF areas, a central square zone can be focused.
[Zone (Oval)] Within the 225 AF areas, a central oval zone can be focused.
0 [ ] is not displayed with default settings. Set [Zone (Square)] to [ON] in [Show/Hide AF Mode] in the [Custom] ([Focus/Shutter]) menu. (l 375)
108

5. Focus/Zoom

Move and Change the Size of the AF Area

1 Press [ ] to display the AF mode selection screen. 2 Select [ ], [ ] or [ ] and then press 4. 3 Press 3421 to move the position of
the AF area. 0 You can also move the AF area by
touching.

When [ ] is selected

­ Press 34 to switch to a horizontal

pattern AF area.

­ Press 21 to switch to a vertical pattern AF area.

4 Rotate ,

or to change the size of the AF area.

0 You can also pinch out/pinch in the AF area to change the size.

0 The first press of [DISP.] returns the AF area position to the center. The second

press returns the size of the AF area to the default.

5 Press .

0 The display method for the AF area using 225-area focusing can be changed: [ ] ¨ [ ] ¨ [AF Area Display] (l 385)

109

5. Focus/Zoom
[1-Area+]/ [1-Area] [1-Area+] Emphasis within a single AF area can be focused. Even when the subject moves out of the single AF area, the subject remains focused in a supplementary AF area (A). 0 Effective when recording moving subjects that
are difficult to track with [ ].
[1-Area] Specify the point to be brought into focus.
110

5. Focus/Zoom

Move and Change the Size of the AF Area

1 Press [ ] to display the AF mode selection screen.

2 Select [ ] or [ ] and then press 4.

3 Press 3421 to move the position of

the AF area.

4 Rotate ,

or to change the

size of the AF area.

5 Press .

0 Refer to “Operations on the AF area movement screen” on page 104 for information about detailed operations to move the AF area.
0 Change the movement speed of a single AF area: [ ] ¨ [ ] ¨ [1-Area AF Moving Speed] (l 356)
[Pinpoint] You can achieve a more precise focus on a small point. If you press the shutter button halfway, the screen that lets you check the focus will be enlarged.
0 When the focus mode is set to [AFC], [ ] is not available.

111

5. Focus/Zoom
Move the Position of the AF Area
1 Press [ ] to display the AF mode selection screen. 2 Select [ ] and then press 4. 3 Press 3421 to set the position of [i] and then press
0 The selected position on the screen will be enlarged. 0 The AF area cannot be moved to the edge of the screen. 4 Press 3421 to fine-adjust the position of [i]. 5 Press or .

or .

Operations on the Magnification Window

Button operation 3421

Touch operation
Touch Pinch out/ pinch in
s

Description of operation Moves [i].
Enlarges/reduces the screen in small steps.
Enlarges/reduces the screen. Switches magnification window (windowed mode/full screen mode).

[DISP.] [Reset]

First time: Returns to the screen in Step 3. Second time: Returns the AF area position to the center.

112

5. Focus/Zoom

0 When the picture is displayed in windowed mode, you can enlarge the picture by approx. 3k to 6k; when the picture is displayed in full screen, you can enlarge the picture by approx. 3k to 10k.
0 You can also take a picture by touching [ ].

0 When the following functions are being used, [ ­ Video recording/[6K/4K PHOTO]

] switches to [Ø]:

0 You can change the display method of the magnified screen: [ ] ¨ [ ] ¨ [Pinpoint AF Setting] (l 375)

[Custom1] to [Custom3] The shape of the AF area can be set freely in the 225 AF areas. The set AF area can be registered using [ ] to [ ]. The AF area can also be moved while maintaining the set shape.

0 This is not displayed with default settings. In [Show/Hide AF Mode] in the [Custom] ([Focus/Shutter]) menu, set [Custom1] to [Custom3] to [ON]. (l 375)

Register the AF Area Shape

1 Press [ ] to display the AF mode selection screen.

2 Select one of [ ] to [ ] and then press 3.

113

5. Focus/Zoom

3 Select the AF area.

Touch operation

Touch the area to make the AF area.

0 To select consecutive points, drag the screen.
0 To cancel selection of the selected AF

area, touch it again.

Button operation

Press 3421 to select the AF area and then set with or .

(Repeat this)

0 To cancel selection of the selected AF area, press

or

again.

0 To cancel all selections, press [DISP.].

4 Press [Q].

Move the Position of the AF Area
1 Press [ ] to display the AF mode selection screen. 2 Select a registered AF mode shape ([ ] to [ ]) and then press 4. 3 Press 3421 to move the position of the AF area and then press
. 0 Press [DISP.] to return the [i] position to the center.

114

AF Area Movement Operation

5. Focus/Zoom

In default settings, you can use the joystick to directly move and change the size of the AF area when recording.
1 Move the position of the AF
area. On the recording screen, tilt the
joystick.

0 Pressing

enables switching

between the default and set AF area

positions.

In [ ]/[ ], this operation switches the

person, animal or eye to be brought into

focus.

In [ ], this operation displays the

enlarged screen.

2 Change the size of the AF

area.

Rotate , or .

0 Use

for more detailed adjustments.

0 The first press of [DISP.] returns the AF

area position to the center. The second

press returns the size of the AF area to

the default.

115

5. Focus/Zoom
3 Confirm your selection.
Press the shutter button halfway. This will return you to the recording
screen.

0 When [Metering Mode] is [ ], the metering target also moves together with the AF area.
0 In [ ], [ ], [ ], and [ ] to [ ], the size of the AF area cannot be changed.
0 In [ ], it is not possible to move the AF area or change its size. 0 In the [iA] mode, the [ ]/[ ] AF area cannot be moved.
0 You can set the AF area to loop when moved: [ ] ¨ [ ] ¨ [Looped Focus Frame] (l 377)

Moving the AF Area by Touch

You can move the AF area to a touched position on the monitor. You can also change the size of the AF area.

¨ [ ] ¨ [ ] ¨ [Touch Settings] ¨ Select [Touch AF] [AF]

This focuses on the touched subject.

[AF+AE]

This focuses on and adjusts brightness for the touched subject.

0 The default setting is [AF].

116

5. Focus/Zoom

Focus on the Touched Position ([AF])
1 Touch the subject. 0 The AF area moves to the touched position.
2 Pinch out/pinch in to change the AF area size. 0 The first touch of [Reset] returns the AF area position to the center.
The second touch returns the size of the AF area to the default.
3 Touch [Set]. 0 In [ ], touch [Exit]. 0 For [ ]/[ ], the AF area setting is canceled if you touch [ ] on the
recording screen.

Focus on and Adjust Brightness for the Touched Position
([AF+AE])

1 Touch the subject to which you wish to

adjust the brightness.

0 At the touched position, an AF area that

works in the same way as [Ø] is

displayed.

This places a point to adjust brightness at

the center of the AF area.

5HVHW

6HW

2 Pinch out/pinch in to change the AF

area size.

0 The first touch of [Reset] returns the AF area position to the center. The second

touch returns the size of the AF area to the default.

3 Touch [Set].

0 The [AF+AE] area setting is canceled if you touch [ ] (when [ ] or [Ø] is

set: [ ]) on the recording screen.

117

5. Focus/Zoom
Moving the AF Area Position with the Touch Pad
During viewfinder display, you can touch the monitor to change the position and size of the AF area.
1 Set [Touch Pad AF].
¨ [ ] ¨ [ ] ¨ [Touch Settings] ¨ [Touch Pad AF] ¨ [EXACT]/[OFFSET1] to [OFFSET7]

2 Move the position of the AF
area. During viewfinder display, touch the
monitor.

3 Change the size of the AF
area. Rotate , or .

0 Use

for more detailed adjustments.

0 The first press of [DISP.] returns the AF

area position to the center. The second

press returns the size of the AF area to

the default.

4 Confirm your selection.
Press the shutter button halfway.

118

5. Focus/Zoom

Setting Items ([Touch Pad AF])

[EXACT]

Moves the AF area of the viewfinder by touching a desired position on the touch pad.

[OFFSET1] to
[OFFSET7]

Moves the AF area of the viewfinder according to the distance you drag your finger on the touch pad.
Select the range to be detected with the drag operation. [OFFSET1] (entire area)/[OFFSET2] (right half)/[OFFSET3] (upper right)/[OFFSET4] (lower right)/[OFFSET5] (left half)/[OFFSET6] (upper left)/[OFFSET7] (lower left)

[OFF]

—

[Focus Switching for Vert / Hor] Memorizes separate positions for AF areas for when the camera is vertically aligned and for when it is horizontally aligned. Two vertical orientations, left and right, are available.

¨ [ ] ¨ [ ] ¨ Select [Focus Switching for Vert / Hor] [ON] [OFF]

Memorizes separate positions for vertical and horizontal orientations. Sets the same position for vertical and horizontal orientations.

0 In MF, this memorizes the MF Assist position. 0 This does not work in the [ ] and [ ] to [ ] AF modes.

119

5. Focus/Zoom
Record Using MF
MF (Manual Focus) refers to manual focusing. Use this function when you want to fix the focus or when the distance between the lens and the subject is determined and you do not want to activate AF.
1 Set the focus mode lever to
[MF].
2 Select the focus point.
Tilt the joystick to select the focus point.
0 To return the point to be brought into focus to the center, press [DISP.].
3 Confirm your selection.
Press . This switches to the MF Assist
screen, and shows an enlarged display.
120

4 Adjust the focus.
Rotate the focus ring. A MF Assist (enlarged screen)
0 This will display the in-focus portion highlighted with color. (Focus Peaking B)
0 A recording distance guideline is displayed. (MF Guide C)
D Indicator for ¶ (infinity)

5. Focus/Zoom

5 Close the MF Assist screen.
Press the shutter button halfway. This operation can also be
performed by pressing .
6 Start recording.
Press the shutter button fully.

N
10 5 3

2 1.5 1 0.5 0.1 AF

121

5. Focus/Zoom

Operations on the MF Assist Screen

Button operation 3421

Touch operation
Drag Pinch out/ pinch in
s

Description of operation Moves the enlarged display position. Enlarges/reduces the screen in small steps.
Enlarges/reduces the screen. Switches magnification window (windowed mode/full screen mode).

[DISP.] [Reset]

First time: Returns the MF Assist position to the center. Second time: Returns the MF Assist magnification to the default setting.

[AF ON]

AF

The AF operates.

0 When the picture is displayed in windowed mode, you can enlarge the picture by approx. 3k to 6k; when the picture is displayed in full screen, you can enlarge the picture by approx. 3k to 20k.

122

5. Focus/Zoom
0 On the recording screen, you can rotate the focus ring to display the MF Assist screen. If the focus ring has been rotated to enlarge the display, the assist screen will be exited a short time after you cease the operation.
0 You can also display the MF Assist screen by pressing the [ ]. 0 During MF, pressing [AF ON] will activate AF. 0 The recording distance reference mark indicates the
position of the imaging surface. This becomes the reference when measuring the recording distance.
0 You can change the Focus Peaking sensitivity and the display method: [ ] ¨ [ ] ¨ [Focus Peaking] (l 356)
0 You can memorize the MF Assist position separately for vertical and horizontal orientations: [ ] ¨ [ ] ¨ [Focus Switching for Vert / Hor] (l 119)
0 You can change the display method of the magnified screen: [ ] ¨ [ ] ¨ [MF Assist] (l 374)
0 You can change the MF Guide display units: [ ] ¨ [ ] ¨ [MF Guide] (l 374)
0 You can disable focus ring operation: [ ] ¨ [ ] ¨ [Focus Ring Lock] (l 374)
0 You can set the movement of the MF Assist position to loop: [ ] ¨ [ ] ¨ [Looped Focus Frame] (l 377)
0 The camera memorizes the focus point when you turn it off: [ ] ¨ [ ] ¨ [Lens Focus Resume] (l 394)
0 The amount of focus movement can be set: [ ] ¨ [ ] ¨ [Focus Ring Control] (l 394)
123

5. Focus/Zoom
Recording with Zoom

Use the optical zoom of the lens to zoom to telephoto or wide-angle. When taking pictures, use [Ex. Tele Conv.] to increase a telescopic effect without image deterioration. When recording videos, use [Image Area of Video] to obtain the same telescopic effect as [Ex. Tele Conv.]. 0 For details about [Image Area of Video], refer to page 249.

Rotate the zoom ring.
T: Telephoto W: Wide-angle

Rotating the zoom ring displays the focal

length on the recording screen.

35mm

0 The focal length display can be hidden: [ ] ¨ [ ] ¨ [Focal Length] (l 388)

124

Extended Tele Conversion

5. Focus/Zoom

[Ex. Tele Conv.] enables you to take pictures that are further enlarged
beyond what is available with the optical zoom, without any deterioration in image quality. 0 The [Ex. Tele Conv.] maximum magnification ratio differs depending on the [Picture
Size] set in the [Photo] ([Image Quality]) menu. ­ Set to [ M]: 1.4k ­ Set to

1 Set [Picture Size] to [M] or [S].
¨ [ ] ¨ [ ] ¨ [Picture Size] ¨ [M]/[S] 2 Set [Ex. Tele Conv.].
¨ [ ] ¨ [ ] ¨ [Ex. Tele Conv.] [ZOOM] [TELE CONV.] [OFF]

Changes the zoom magnification. Fixes the zoom magnification at the maximum.
s

125

5. Focus/Zoom

Changing the Zoom Magnification

Button operation

1 Set [Ex. Tele Conv.] to [ZOOM].

0

¨ [ ] ¨ [ ] ¨ [Ex. Tele Conv.] ¨ [ZOOM]

2 Set the Fn button to [Zoom Control]. (l 321)

3 Press the Fn button.

4 Press the cursor buttons to operate the zoom.

31: T (telephoto) 24: W (wide-angle)

0 Press the Fn button again, or wait a specified time to end zoom operation.
A Zoom magnification

EXS
EX1.8x

Touch operation
0 With the default settings, the Touch Tab is not displayed. Set [Touch Tab] to [ON] in [Touch Settings] in the [Custom] ([Operation]) menu. (l 377)

1 Set [Ex. Tele Conv.] to [ZOOM].

0

¨ [ ] ¨ [ ] ¨ [Ex. Tele Conv.] ¨ [ZOOM]

2 Touch [ ].

3 Touch [ ].

AF

126

5. Focus/Zoom

4 Drag the slide bar to operate the

zoom.

T: Telephoto

W: Wide-angle

0 To end Touch Zoom operations, touch

[ ] again.

0 When displaying the [Ex. Tele Conv.] setting screen using the Fn button, pressing [DISP.] allows you to change the [Picture Size] setting.
0 When the following functions are being used, [Ex. Tele Conv.] is not available: ­ [6K/4K PHOTO] ­ [65:24]/[2:1] ([Aspect Ratio]) ­ [RAW] ([Picture Quality]) ­ [HLG Photo] ­ [High Resolution Mode] ­ [Toy Effect]/[Toy Pop] ([Filter Settings]) ­ [Post-Focus] ­ [Multiple Exposure]

127

6. Drive/Shutter/Image Stabilizer
Selecting the Drive Mode
You can switch the drive mode to Single, Burst, etc. to match the recording conditions. Rotating the drive mode dial.

[]

Single

[

]/[

]

Burst (l 129, 133)

Time Lapse Shot/ [ ] Stop Motion Animation (l 145, 149)

[

]

Self-timer (l 154)

Takes one picture each time the shutter button is pressed. Takes pictures continuously while the shutter button is pressed and held. 6K/4K photo recording is also possible.
Takes pictures with Time Lapse Shot or Stop Motion Animation.
Takes pictures when the set time elapses after the shutter button is pressed.

0 The detailed setting screens for each drive mode can be called up with an Fn
button: [ ] ¨ [ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Drive Mode]

128

Taking Burst Pictures

6. Drive/Shutter/Image Stabilizer

Takes pictures continuously while the shutter button is pressed and held. You can choose a burst setting which enables burst recording in high image quality, [H], [M] or [L], or one which enables high-speed burst recording, [ ] (6K/4K photo), to suit the recording conditions.
1 Set the drive mode dial to [ ] (Burst Shot 1) or [ ] (Burst Shot 2). 0 Configure the burst settings for each of
[ ] and [ ].

2 Select the burst rate.
¨ [ ] ¨ [ ] ¨ [Burst Shot 1 Setting]/[Burst Shot 2 Setting] 0 With the default settings, [H] is set for [ ] and [ ] is set for [ ].

[

]

For information about 6K/4K photo recording, refer to “6K/4K Photo Recording”. (l 133)

[H] Takes high-speed burst pictures. [M] Takes medium-speed burst pictures. [L] Takes low-speed burst pictures.

3 Close the menu.
Press the shutter button halfway.
4 Start recording.
0 Takes burst pictures while the shutter button is pressed fully.

129

6. Drive/Shutter/Image Stabilizer

Burst Rate

[H] (High speed)
[M] (Medium speed)
[L] (Low speed)

Mechanical shutter, electronic
front curtain 7 frames/second
([AFS]/[MF]) 5 frames/second
([AFC])
5 frames/second
2 frames/second

Electronic shutter
7 frames/second ([AFS]/[MF])
5 frames/second ([AFC])
5 frames/second
2 frames/second

Live View when taking burst pictures
None ([AFS]/[MF]) Available ([AFC])
Available
Available

0 The burst rate may be lower depending on the settings for recording such as [Picture Size] and focus mode.

Maximum Number of Frames Recordable

[H] (High speed) [FINE]/[STD.] [Picture Quality] [RAWiFINE]/[RAWiSTD.]/[RAW] [M] (Medium speed)

999 frames or more

24 frames or more

[L] (Low speed)

0 When recording under the test conditions specified by Panasonic. (Using a card in card slot 1 compatible with UHS-II) Recording conditions may reduce the maximum number of frames recordable.
0 The burst rate will become lower during recording but pictures can continue to be taken until the card becomes full.

130

6. Drive/Shutter/Image Stabilizer

Number of Pictures That Can Be Taken Continuously

When you press the shutter button halfway,

the number of pictures that can be taken

continuously will appear on the recording

ISO100

r20

screen.

Example) When 20 frames: [r20] 0 Once recording starts, the number of pictures that can be taken continuously will

decrease.

When [r0] appears, the burst rate decreases. 0 When [r99i] is displayed on the recording screen, you can take 100 or more burst

pictures.

Focus when Taking Burst Pictures

Focus mode

[Focus/Shutter Priority] (l 373) [H] [M]/[L] [FOCUS] [AFS] [BALANCE]

Fixed to the focus of the first frame

[RELEASE] [FOCUS]

Estimated focus

Normal focus

[AFC] [BALANCE] [RELEASE]

Estimated focus

[MF]

—

Focus set with manual focus

0 When the subject is dark with [AFC], the focus is fixed to that of the first frame. 0 With estimated focus, the burst rate takes priority and the focus is estimated to the
extent possible. 0 With normal focus, the burst rate may become slow.

131

6. Drive/Shutter/Image Stabilizer

Exposure when Taking Burst Pictures

Focus mode [AFS] [AFC] [MF] [H] Fixed to the exposure of
the first frame
The exposure is adjusted for each frame
Fixed to the exposure of the first frame

[M]/[L] The exposure is adjusted for each frame

0 It may take a while to save burst pictures. If you continue to take burst pictures while saving is in progress, the maximum number of frames recordable will be reduced. When taking burst pictures, we recommend using a high-speed card.
0 Taking burst pictures does not work while you are using the following functions: ­ [High Resolution Mode] ­ [Rough Monochrome]/[Silky Monochrome]/[Miniature Effect]/[Soft Focus]/ [Star Filter]/[Sunshine] ([Filter Settings]) ­ [Live View Composite] ­ [Post-Focus] ­ [Multiple Exposure]

132

6. Drive/Shutter/Image Stabilizer
6K/4K Photo Recording

With 6K Photo, you can take high-speed burst pictures at 30 frames/ second and save the desired pictures, each made up of approx. 18 million pixels, extracted from their burst file. With 4K photo, you can take high-speed burst pictures at 60 frames/ second and save the desired pictures, each made up of approx. 8 million pixels. 0 “6K PHOTO” is a high-speed burst picture function to extract and save the desired
pictures from images with an aspect ratio for pictures of 4:3 or 3:2 and an effective picture size equivalent to the number of pixels (approx. 18 megapixels) for images of 6K size (around 6,000 widek3,000 high).

0 Use a UHS Speed Class 3 or higher card when recording. 0 The angle of view becomes narrower (when using a full-frame lens).

1 Set the drive mode dial to [ ] (Burst Shot 1) or [ ] (Burst Shot 2).
0 Configure the burst settings for each of [ ] and [ ].

2 Select [6K/4K PHOTO].
¨ [ ] ¨ [ ] ¨ [Burst Shot 1 Setting]/[Burst Shot 2 Setting] ¨
[]

0 With the default settings, [ [ ].

] is set for

133

6. Drive/Shutter/Image Stabilizer

3 Select [Picture Size / Burst
Speed]. ¨ [ ] ¨ [ ] ¨ [6K/4K
PHOTO] ¨ [Picture Size / Burst
Speed] [6K 18M] [4K H 8M] [4K 8M]

Picture size

4992k3744 5184k3456

3328k2496 3504k2336 3840k2160 2880k2880

Burst rate
30 frames/ second
60 frames/ second
30 frames/ second

[Rec Quality]¢ [6K/200M/30p] [4K/150M/60p] [4K/100M/30p]

¢ Saved as 6K/4K burst files whose [Rec. File Format] is [MP4].
4 Select [Rec Method].

[ ][ ][ ([6K/4K Burst])

When you wish to capture the best moments of

]

a fast-moving subject Takes burst pictures while the shutter button is

pressed.

Audio recording: None

134

6. Drive/Shutter/Image Stabilizer

[ ][ ][ ] ([6K/4K Burst(S/S)]) “S/S” is an abbreviation for start/stop.
[ ][ ][ ] ([6K/4K Pre-Burst])

When you wish to capture an unpredictable photo opportunity Starts taking burst pictures when the shutter button is pressed. Pressing the button again stops taking burst pictures. The start tone and stop tone are output.

Audio recording: Available¢

When you wish to capture at the moment of a photo opportunity Takes burst pictures for approx. 1 second before and after the moment the shutter button is pressed. The shutter sound is output once only.

Recording duration: Approx. 2 seconds

Audio recording: None

¢ Audio is not played back during playback with the camera.
5 Close the menu.
Press the shutter button halfway.
6 Start recording.
0 [Continuous AF] works and the focus is adjusted continuously during recording with AF.

[6K/4K Burst]

1 Press the shutter button halfway. 2 Press the shutter button fully and keep it
pressed during recording.
A Press and hold B Recording is performed 0 Press the shutter button fully early because
recording will take approx. 0.5 second to start after it is pressed fully.

135

6. Drive/Shutter/Image Stabilizer
[6K/4K Burst(S/S)] 1 Press the shutter button fully to start recording.
2 Press the shutter button fully again to stop recording.
C Start (First) D Stop (Second) E Recording is performed 0 You can add markers by pressing [Q] during recording. (Up to 40 markers per
recording) This allows you to skip to the positions where you added markers when selecting pictures from a 6K/4K burst file. [6K/4K Pre-Burst] Press the shutter button fully. F Approx. 1 second G Recording is performed 0 While the recording screen is displayed, the
AF will operate constantly to continue focusing. The exposure is also adjusted continuously, except in [M] mode. 0 When the subject is not at the center, use AF/AE Lock if you wish to lock the focus and exposure. (l 198)
0 In default settings, Auto Review operates, and a screen that lets you select pictures from a burst file will be displayed. To continue recording, press the shutter button halfway to return to the recording screen. For how to select and save pictures from a recorded 6K/4K burst file, refer to page 139.
136

6. Drive/Shutter/Image Stabilizer
[Pre-Burst Recording] ([6K/4K Burst]/[6K/4K Burst(S/S)])
The camera starts recording approx. 1 second before the shutter button is pressed fully, so you will not miss a photo opportunity.
¨ [ ] ¨ [ ] ¨ [6K/4K PHOTO] ¨ Select [Pre-Burst Recording] Settings: [ON]/[OFF] 0 When [Pre-Burst Recording] is being used, [PRE] is displayed on the recording
screen. 0 The AF behavior and functionality restrictions when using [Pre-Burst Recording] are
the same as for [6K/4K Pre-Burst].
0 Setting ranges become the following with 6K/4K photo recording: ­ Shutter speed: 1/30 (1/60 when [4K H 8M] is set) to 1/8000 ­ [Min. Shutter Speed]: [1/500] to [1/30] ([1/60] when [4K H 8M] is set) ­ Exposure compensation: n3 EV
0 Recording stops when the continuous recording time exceeds 15 minutes. 0 The file save method differs depending on the type of card.
­ SDHC memory card: A new file will be created to continue recording if the file size exceeds 4 GB.
­ SDXC memory card: Files are not divided for recording.
0 If the temperature of the camera rises, [ ] may be displayed, recording may stop, and some functions may become unavailable temporarily. Wait until the camera cools down.
0 When [6K/4K Pre-Burst] or [Pre-Burst Recording] is set, the battery drains faster and the camera temperature rises. Set these settings only when recording.
0 For 6K/4K photo, the menu items below are fixed to the following settings: ­ [Shutter Type]: [ELEC.] ­ [Picture Quality]: [FINE] 137

6. Drive/Shutter/Image Stabilizer
0 With 6K/4K photo recording, the following functions are not available: ­ Flash ­ [Bracketing] ­ Program Shift ­ AF mode ( ) ­ [MF Assist] ([6K/4K Pre- Burst] only)
0 When you record in an extremely bright location or under lighting such as fluorescent or LED lighting, the coloring or brightness of the image may change or horizontal stripes may appear on the screen. Lowering the shutter speed may reduce the effect of horizontal stripes.
0 The following functions are restricted when recording 6K/4K photos when connected to an external device (TV, etc.) via HDMI: ­ HDMI output is not possible during recording. ­ [6K/4K Pre-Burst] changes to [6K/4K Burst]. ­ [Pre-Burst Recording] is not available.
0 6K/4K photo recording does not work while you are using the following functions: ­ [High Resolution Mode] ­ [Rough Monochrome]/[Silky Monochrome]/[Miniature Effect]/[Soft Focus]/ [Star Filter]/[Sunshine] ([Filter Settings]) ­ [Live View Composite] ­ [Post-Focus] ­ [Multiple Exposure] 0 When using APS-C lenses, 6K photo is not available.
138

6. Drive/Shutter/Image Stabilizer
Selecting Pictures from a 6K/4K Burst File

You can select pictures from the 6K/4K burst files and save them.
0 When continuing to select pictures from the Auto Review after recording
2 3 6K/4K photos, start the operation from either Step or .

1 Select a 6K/4K burst file on the
playback screen. (l 300) Select an image with the [ ] or
[ ] icon and then press 3. You can also perform the same
operation by touching [ ] or [ ].
3 0 If the images were recorded with [6K/4K Pre-Burst], proceed to Step .
2 Roughly select the scene.
Drag the slide bar A.

0 For information about how to use the picture selection slide view screen, refer to page 141.
0 If the images were recorded with [6K/4K Burst] or [6K/4K Burst(S/S)], touching [ ] allows you to select the scene in the 6K/4K burst playback screen. (l 143)
3 Select the frame to save.
Drag the picture selection slide view
B. You can also perform the same
operation by pressing 21.

Picture selection slide view screen

0 To continuously rewind or forward frame-by-frame, touch and hold [ ]/ [ ].

139

6. Drive/Shutter/Image Stabilizer

4 Save the picture.

Touch [

] or [

].

A confirmation screen appears.

0 The picture is saved in JPEG format ([FINE] picture quality). 0 The recording information (Exif information), such as the shutter speed,
aperture, and ISO sensitivity, is also saved with the picture that is saved.
Correcting Pictures After Recording (Post-Recording Refinement)
Correcting Distortion in Pictures ([Reduce Rolling
Shutter]) When saving pictures, correct any distortion caused by the electronic shutter (rolling shutter effect).
4 1 On the save confirmation screen in Step on page 140, touch
[Reduce Rolling Shutter]. 0 If there is no effect even after using correction, after a message is displayed
advising that there is no effect, the confirmation screen returns.
2 Check the correction result and then touch [Save]. 0 To check the corrected and uncorrected versions of the picture, touch [Set/
Cancel].
0 The angle of view may become narrower if correction is performed. 0 The correction may appear unnatural due to the movement of subjects.

140

6. Drive/Shutter/Image Stabilizer
Reducing Noise Caused by High Sensitivity ([6K/4K
PHOTO Noise Reduction]) When saving pictures, reduce the noise that occurs due to high ISO sensitivity.
¨ [ ] ¨ [ ] ¨ Select [6K/4K PHOTO Noise Reduction] Settings: [AUTO]/[OFF] 0 This is not applied to pictures saved with [6K/4K PHOTO Bulk Saving].
Picture Selection Operations
Picture Selection Slide View Screen Operations

A Slide bar B Picture selection slide view C Position of displayed frame

141

6. Drive/Shutter/Image Stabilizer

Button operation
21/ /
21 Press and
hold

Touch operation
Drag/

Description of operation
Selects a frame. 0 To change the frames displayed in the picture
selection slide view, select the frame at the left/ right end and then touch [ ] or [ ].

Continuously rewinds or forwards Touch and hold frame-by-frame.

s
/ 3421 [] s s s
/

Touch/drag Pinch out/ pinch in
s Drag
/
/

Selects the frame to display.
Enlarges or reduces the display.
Selects a frame while maintaining the enlarged display (during enlarged display). Moves the enlarged display position (during enlarged display). Displays the 6K/4K burst playback screen. Switches to marker operation. Adds or deletes a marker. Displays the in-focus portion highlighted with color ([Focus Peaking]). 0 [ON]/[OFF] are switched.
Saves the picture.

0 During marker operation, you can skip to set markers or the beginning or end of the

6K/4K burst file. Touch [

] to return to the previous operation.

Button operation
1
2

Touch operation

Description of operation
Moves to the next marker. Moves to the previous marker.

142

6. Drive/Shutter/Image Stabilizer
6K/4K Burst Playback Screen Operations

While paused

During continuous playback

Button operation
3 4 1/ / 2/ / s
/ 3421
[] s s

Touch operation
s s s s
Touch/drag Pinch out/ pinch in
s Drag
/

Description of operation
Performs continuous playback or pauses (during continuous playback). Performs continuous rewind playback or pauses (during continuous rewind playback). Performs fast-forward playback or performs frame-by-frame forwarding (while paused). Performs fast-rewind playback or performs frame-by-frame rewinding (while paused).
Selects the frame to display (while paused).
Enlarges or reduces the display (while paused).
Selects a frame while maintaining the enlarged display (during enlarged display). Moves the enlarged display position (during enlarged display). Displays the picture selection slide view screen (while paused). Switches to marker operation.
Adds or deletes a marker.

143

6. Drive/Shutter/Image Stabilizer

Displays the in-focus portion highlighted with

s

color ([Focus Peaking]).

0 [ON]/[OFF] switches.

/

/

Saves the picture (while paused).

0 During marker operation, you can skip to set markers or the beginning or end of the

6K/4K burst file. Touch [

] to return to the previous operation.

Button operation
1
2

Touch operation
s
s

Description of operation
Moves to the next marker. Moves to the previous marker.

0 To select and save pictures from a 6K/4K burst file on a PC, use the “PHOTOfunSTUDIO” software. However, it is not possible to treat 6K/4K burst files as videos in ” PHOTOfunSTUDIO “.
0 To play and edit 6K burst files on a PC, you need a high-performance PC environment. We recommend selecting and saving pictures with the camera.

[6K/4K PHOTO Bulk Saving] You can save any 5 second period of pictures from a 6K/4K burst file all at once.

1 Select [6K/4K PHOTO Bulk Saving].

0

¨ [ ] ¨ [ ] ¨ [6K/4K PHOTO Bulk Saving]

2 Press 21 to select a 6K/4K burst file and then press

or .

0 If the burst time is 5 seconds or less, all frames are saved as pictures.

3 Select the first frame of the pictures to be saved all at once and then

press or .

0 The pictures are saved as a group of burst pictures in JPEG format.

144

6. Drive/Shutter/Image Stabilizer
Recording with Time Lapse Shot
Pictures are taken automatically at a set recording interval. This feature is ideal for keeping track of changes over time in subjects such as animals and plants. The pictures taken will be saved as a set of group images that can also be combined into a video.
0 Check that the clock is set correctly. (l 54) 0 For long recording intervals, we recommend setting [Lens Focus Resume] to
[ON] in the [Custom] ([Lens / Others]) menu.
1 Set the drive mode dial to
[ ].
2 Set [Mode] to [Time Lapse
Shot]. ¨ [ ] ¨ [ ] ¨ [Time
Lapse/Animation] ¨ [Mode] ¨ [Time Lapse Shot] 145

6. Drive/Shutter/Image Stabilizer

3 Set the recording settings.

[Mode]

Switches between Time Lapse Shot and Stop Motion Animation.

[Shooting Interval Setting] [ON] [OFF]

Sets the interval before the next recording takes place.
Takes pictures without leaving recording intervals.

[Start Time] [Now]

Starts recording when the shutter button is pressed fully.

[Start Time Set] Starts recording at the set time. [Image Count]/ [Shooting Interval]

Sets the number of pictures and the recording interval to be taken. 0 [Shooting Interval] is not available when [Shooting
Interval Setting] is set to [OFF].

[Exposure Leveling]

Adjusts the exposure automatically to prevent large changes in brightness between adjacent frames.

4 Close the menu.
Press the shutter button halfway.
5 Start recording.
Press the shutter button fully.
0 When [Start Time Set] is set, the camera will enter into sleep status until the start time is reached.
0 During recording standby, the camera enters into sleep status when no operation is performed for a certain period of time.
0 The recording will stop automatically.

146

6. Drive/Shutter/Image Stabilizer

6 Create a video. (l 152)
0 After the recording has stopped, select [Yes] on the confirmation screen to proceed to create a video. Even if you select [No], you can still create a video with [Time Lapse Video] in the [Playback] ([Process Image]) menu. (l 410)

Operations during Time Lapse Shot Recording
Pressing the shutter button halfway during sleep status will turn on the camera. 0 You can perform the following operations by pressing [Q] during Time Lapse Shot
recording.

[Continue] [Pause] [Resume] [End]

Returns to the recording. (Only during recording) Pauses the recording. (Only during recording) Resumes the recording. (Only while paused) 0 You can also press the shutter button to resume. Stops the Time Lapse Shot recording.

147

6. Drive/Shutter/Image Stabilizer
0 Pictures recorded to more than one card cannot be combined into a single video.
0 Pictures taken with [HLG Photo] cannot be converted to videos. 0 The camera gives priority to achieving the standard exposure, so it may not
take pictures at the set interval or tak

References

• LoiLoScope2 販売・サポート終了のお知らせ
• SILKYPIX Developer Studio SE Version
• Digital Camera | Digital AV | Support | Panasonic Global
• Download | Digital Camera | Digital AV | Support | Panasonic Global
• LUMIX Tether Download Program | Download | Digital Camera | Digital AV | Support | Panasonic Global
• PHOTOfunSTUDIO 10.1 PE Download Program | Download | Digital AV Software | Digital AV | Support | Panasonic Global

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>