TRISTAR VE-5951 Metal Stand Fan Instruction Manual
- June 14, 2024
- Tristar
Table of Contents
VE-5951 Metal Stand Fan
Instruction
manual
VE5951/VE5953/VE5970/VE5971/VE5972/VE5973/VE5974
PARTS DESCRIPTION
SAFETY
-
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
-
By ignoring the safety instructions the manufacturer cannot be held responsible for the damage.
-
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
-
Never move the appliance by pulling the cord and make sure the cord cannot become entangled.
-
The appliance must be placed on a stable, level surface.
-
The user must not leave the appliance unattended while it is connected to the supply.
-
This appliance is only to be used for household purposes and only for the purpose it is made for.
-
To protect yourself against an electric shock, do not immerse the cord, plug or appliance in the water or any other liquid.
-
Never insert your fingers or any other object into the air outlet. Take special care to warn children of these dangers.
-
Do not use the unit:
near a source of fire.
in an area exposed to direct sunlight.
in an area where water is likely to splash.
near a bath, a shower or a swimming pool. -
WARNING: Do not wrap the cable around the main body of the appliance during or after use.
-
WARNING: Misuse of the appliance could cause personal injury.
-
This appliance is intended to be used in household and similar applications such as:
– Staff kitchen areas in shops, offices and other working environments.
– By clients in hotels, motels and other residential type environments.
– Bed and breakfast type environments.
– Farm houses.
This product complies with conformity requirements of the applicable
European regulations or directives.
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local Authority or
local store for recycling advice.
The Green Dot is the registered trademark of Der Grüne Punkt
– Duales System Deutschland GmbH and is protected as a trademark worldwide.
The logo may only be used by customers of DSD GmbH holding a valid trademark
usage contract or by engaged waste management companies within the Federal
Republic of Germany. This also applies to reproduction of the logo by third
parties in a dictionary, an encyclopaedia or an electronic database containing
a reference manual.
The universal recycling symbol, logo, or icon is an internationally
recognized symbol used to designate recyclable materials. The recycling symbol
is in the public domain and is not a trademark.
**** The Eurasian Conformity mark (ЕАС) is a certification mark to indicate
products that conform to all technical regulations of the Eurasian Customs
Union.
The product and packaging materials are recyclable, subject to extended
manufacturer responsibility. Dispose it separately, following the illustrated
packaging symbols, for better waste treatment. The Triman logo is valid in
France only.
PARTS DESCRIPTION
- Speed adjustment knob
- Oscillation knob
- Fan
ASSEMBLY THE FAN
- Remove the base nut from the standing pipe. And then insert the standing pipe into the hole of base, put the heavy base under the base. Fit the base nut back to the standing pipe and screw it on firmly.
- Remove the 4 screws from the motor unit.
- Fit the rear fan grill onto the motor unit. Make sure that the 4 holes on the motor match the 4 holes on the rear fan grill. Fit the 4 screws and screw it on firmly.
- Put the blade on the motor unit and carefully tighten the screw.
- Fit the front fan grill onto the rear cage and fix them together using the metal clips. Tighten the small screw.
- Put the motor unit on the top of the standing pipe, screw it well.
BEFORE THE FIRST USE
- Take the appliance and accessories out the box. Remove the stickers, protective foil or plastic from the device.
- Place the device on a flat stable surface and ensure a minimum of 10 cm. free space around the device. This device is not suitable for installation in a cabinet or for outside use.
- Put the power cable into the socket. (Note: Make sure the voltage which is indicated on the device matches the local voltage before connecting the device. Voltage 220V-240V ~ 50-60Hz).
- Be careful when mounting the blades (the blades can be sharp).
USE
- Set the speed adjustment knob to the desired position.
- To make the fan head oscillate, push down the Oscillation Knob.
- To stop the fan head from oscillating, pull-up the Oscillation Knob.
- The head of the fan can be adjusted up or down, to do this loosen the adjusting knob, adjust the fan to the desired angle, to secure tighten the adjusting knob.
ENVIRONMENT
This appliance should not be put into the domestic garbage at the end of its
durability, but must be offered at a central point for the recycling of
electric and electronic domestic appliances. This symbol on the appliance,
instruction manual and packaging puts your attention to this important issue.
The materials used in this appliance can be recycled. By recycling of used
domestic appliances you contribute an important push to the protection of our
environment. Ask your local authorities for information regarding the point of
recollection.
Support
You can find all available information and spare parts at
www.tristar.eu!
WWW.TRISTAR.EU
Tristar Europe B.V. | Swaardvenstraat 65
5048 AV Tilburg | The Netherlands
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>