Govee H61A8 Outdoor Neon Rope Lights User Guide
- June 14, 2024
- Govee
Table of Contents
Govee H61A8 Outdoor Neon Rope Lights
Safety Tips
- The working temperature of this product is -10°C~+45°C. The storage temperature is -30°C~+ 70°C.
- To avoid the product from being damaged by a weeding machine, it is recommended to take it back for now and reinstall it after the weeding.
INSTALLATION INSTRUCTION
Installation Method 1:
- Unpack the box and check whether the items listed below are included.
- When connecting, insert the waterproof DC head into the groove and screw the nut firmly to ensure the best waterproof performance. Connect the rope light with the power adapter and plug it into the power to check whether it lights up.
- Fit the light into the ground spike and firmly insert it into the ground. It is recommended to leave a 35-centimetre gap between two ground spikes.
- You could use the ground spike (for corners) to help your installation if there are any corners.
- After the ground spikes are inserted into the earth, connect the light to power and enjoy your lighting.
Installation Method 2
For places such as railings, follow the installation steps below:
- Follow steps 1 and 2 in Installation Method 1 to get the rope light ready and make sure it works properly.
- Drill a hole where you wish to install the rope light and insert the expansion tube into the hole. For the diameter of the hole, please refer to the size of the screw.
- Tear off the protective film of the adhesive tape on the back of the mounting clip, align with the hole, and stick the mounting clip on. Firmly press for 5 to 10 seconds. It is recommended to leave a 35-centimeter gap between two mounting clips.
- Turn the screw into the hole.
- Repeat steps 2, 3 and 4 to complete the installation of the clips. After that, fit the rope light into all the clips.
- Power on and enjoy your lighting.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>