KAWA S6 Baby Monitor User Manual

KAWA S6 Baby Monitor

Box Contents

Monitor And Camera Features

Monitor Features

• 1 2. Volume -/+Keys
• 3. Menu Button:

1. Short press the [Menu]to pop up the menu.
2. Short press the (Menu) to close the menu and return to the home page.

• 4). OK Key:

1. Click the (OK) button to enter the Camera Setting in the disconnected interface.
2. For function selection, press the (OK) key to confirm the selection.
3. In multi-screen display, long press the [OK) key to select the monitoring screen. 6608 Navigation Buttons

• 9. Return to previous level of menu/talk button:

1. Short press the [return menu / talk intercom) button in the menu bar and return to the superior menu.
2. Any interface, long press [return to the last menu/ Talk intercom] button to achieve voice intercom.

• 10. Power Button: Long press for 3 seconds to power on / off, short press to switch on / off the monitor screen
• 11. Switch keys zoom l.SX .. 2X and zoom off
• 12. Monitor LED Indicator (Red: In Charging Green: Full Power)
• 13. Monitor Micro USB Port
• 14. Display Screen
• 15. Microphone
• 16. Reset Button
• 17. Support Stand
• 18. Speaker

Camera Features

1. Wide-Angle Lens
2. Microphone
3. Ambient Light Sensor
4. Camera Power LED
5. Status Indicator
6. Speaker
7. Temperature Sensor
8. Camera Micro USB Port
9. Camera Pairing Button

Monitor Charging Method And Camera Power Supply

Monitor Charging Method

Please fully charge the Monitor before using. Charging method:

1. Connect one end of the Micro USB (1.5m) cable to the Baby Monito and the other end to the power adapter (5 V 2A).
2. Plug the adapter into a power outlet.

Camera Power Supply Method

1. Connect one end of the Micro USB (2.6m) cable to the camera, and the other end to the power adapter (5 V 1A).
2. Plug the adapter into a power outlet.
   • After powering the Camera and fully charging the Monitor, you can enjoy the video baby monitor.

Camera Installation Methods

Install Camera( wall mount & corner mount)

1. Determine the installation position.
2. Put the upper wall bracket on the mounting position and mark the screw hole with a pencil.
3. Drill the hole 06.0 mm on the wall, then insert the expansion nail into the hole.
4. Screw through the mounting hole of the upper wall bracket and screw into the expansion nail.
5. Align the Camera on the upper wall bracket, push forward and hold the Camera.

Note: Please make sure the Camera is properly installed and secured.

Installation Method 1

Installation Method 2

Add Camera to the Baby Monitor

Baby Monitor and Baby Camera are paired out of the box. Please refer to the following steps when adding additional Baby Cameras or after resetting a Baby Camera:

Please make sure the Baby Monitor and the Baby Camera matches the same version.

1. Press the [MENU] button to open the menu, select “Camera Settings”
   • →”Camera Pairing”, press [OK]to add Camera.
2. Press the pair button on the back of the Camera for seconds until you hear the ticking prompt.

Note: If you restore the initial plant settings, press the OK button in the “Please add a camera” interface to add Camera.

After the Monitor and Camera are successfully connected, please do not place the Camera and Monitor too close, otherwise it may cause the following.

Display Mode of Screen

When you add more than two Baby Cameras, you can manually and automatically switch the screen, or you can display multiple screens at the same time.

1. Manual switching: Long press the [OK I button, the screen will be switched to the next screen. The icon of the camera you select will display.
2. Automatic switching (Muti-Camera Cycling): select “Camera Settings” ➔ “Display Mode” ➔ “Muti-Camera Cycling/ ” option. The screen cycles through the list of connected Baby Cameras according to pre-set intervals.
3. Display muti-cameras at the same time: select “camera settings “➔ “display mode”➔”full screen / “, “two screens / “three screens / “, ” four screens, ” option, it can display multiple cameras video at the same time.

Full Screen

• This mode allows you to see one camera in full-screen view.

Multi-screen display

Multi-screen mode allows to view up with 2-screen, 3-screen and 4-screen. And you can operate the camera which its screen around with blue lines, pan/tilt/zoom and “talk to baby”. The audio you hear on the monitor comes from this camera. To switch to another paired Camera, long press the [OK] button for two seconds.

Monitor Menu Settings & Icons Description

Menu settings

Press the [MENU] button on the Monitor to display the functional interface, as shown below:

• Sound Activation
  • VOX Mode: When you turn on the VOX mode, the screen will be turned on automatically if the noise is detected above your pre-set level.
  • Alert Threshold: 1-5 thresholds are optional.
• Alert
  • Sound Alert:  You can set the Baby Monitor to alert you when a specific noise level is detected.
  • Note: Surrounding noise might set off false alarm.
  • High Temp Alert: When the temperature is higher than the value you set, the monitor will alert.
  • Note: The high temperature alert you set must be higher than the low temperature alert you set.
  • Low Temp Alert: When the temperature is lower than the value you set, the monitor will alert.
  • Note: The low temperature alert you set must be lower than the high temperature alert you set.
  • Alert Duration: 5 Secs, 10 Secs, 20 Secs and 30 Secs are optional. “10 Secs” by default. The monitor will alert continuously according to the alert duration you set.
  • AlertVolume: 1-3 volume are optional, “2” by default.
  • Note: When the Monitor paired more Cameras, if you set volume 1 which means all paired cameras are volume 1.
  • Key Note: The interval duration between each sound alarm is 5 seconds. It will not alert during this interval even there is alert trigger condition.
• Lullaby
  • Monitor white noise: Help parent to sleep. Select your desired white noise. You can adjust the volume by pressing the”-/+” volume button.
  • Camera Lullaby: Comfort baby. Select your desired lullaby song. You can adjust the volume by pressing the”-/+” volume button.
  • Note: Alert is automatically disabled after enabling the lu Ila by function.
  • Warning: The sound of lullabies may mask the baby’s cry.
• Clock Reminder
  • Feeding,Diaper Changing, Other
  • Off, 1H, 1.5H, 2H, 2.5H, 3H, 3.SH, 4H and custom are optional.
  • Description:
  • “Off” indicates that the clock reminder is turned off.
  • “1H, 1.5H, 2H, 2.5H, 3H, 3.5H, 4H” means that the monitor will alarm you after 1, 1.5, 2, 2.5, 3, 3.5, 4 hours. (e.g. When you choose “Feeding” -> “H”, means that the alarm clock will remind you to feed after 3 hours)
  • Custom: You can set the clock according to the time you need.
• Camera Settings
  • Camera Pairing:  1.Add Camera (Note: You can add up to 4 cameras per baby monitor.) 2.Delete Camera
  • Display Mode: Full screen, two split-screen, three split-screen, quad split-screen and cycle cameras.
  • Note: When multiple cameras are connected and set to “cycle cameras”, the monitor will cycle through the list of connected baby monitors according to the pre-set interval.
• More Settings
  • Night Vision Mode: Automatic and close are optional. When set to “Auto”, the camera automatically switches the screen color according to the light condition in the room. Note: If the night vision mode is set to “Close”, the Monitor will stick to the daylight screen color and will not change when the surrounding environment is getting dark.
  • Time Setting: Set the monitor system time.
  • Brightness: Set the screen brightness.
  • Sleep Mode:  Off, 1min, 3min and 5min are optional.
  • Enable to automatically turn off the screen after 1min, 3min or 5min. If you select “Off”, the monitor won’t sleep automatically.
  • Language Setting: Set the monitor display language.
  • Temperature Unit:  °C and °F are optional.
  • Select the desired temperature unit.
  • Anti-Screen Flicker:  If the baby monitor’s screen is flickering, change to the other Anti-Screen Flicker mode. Illumination source frequency: 50Hz and 60Hz optional. Please select the appropriate frequency of the lighting source.
  • Default Settings: Reset all options to their default setting.
  • Version Information: Display Monitor version number, Camera version number, Monitor SN number, and Camera SN number.

Small icons description

Warning Explain

WARNING: STRANGULATION HAZARD: Cords can strangle children. Keep cords out of the reach of children (more than 3ft (0.9m) away)

Certification

CE: This device complies with the radio interference requirements of the European Community.

Hereby, KAWA ELECTRONICS COMPANY LIMITED declares that the radio equipment type Baby Monitors $6 is in compliance with Directive 2014/ 53/EU.The full text of the EU declaration of conformity is available at the following internet address: www.kawa-in.com
The product shall only be connected to a USB interface of version USB 2.0 or higher and that the connection to a power USB is prohibited.

Caution

• For Adapter: Shall be installed near the equipment and shall be easily accessible.
• For Battery: Risk of explosion battery is replaced by an incorrect type, dispose of used batteries according to the instructions. To prevent possible hearing damage, do not listen at high volume levels for long periods.
• Operating Frequency Range: 2400 – 2483.5MHz
• Transmit Output Power: 21 (+1/-2) dBm @ Maximum Power Setting

Only can use the adapter as below:

• S6-M: Rated Input & Output: AC100V-240V, 50/60Hz, 200mA, DC5.OV, 2A.
• S6-C: Rated Input & Output: AC100V-240V, 50/60Hz, 200mA, DC5.OV, 1A.
• Manufacturer: KAWA ELECTRONICS COMPANY LIMITED
• Model Name: Baby Monitor S6
• The plug could be disconnected from adapter.

EVATOST CONSULTING LTD

• Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR
• contact@evatmaster.com

eVatmaster Consulting GmbH

• Bettinastr. 30 60325 Frankfurt am Main,Germany
• contact@evatmaster.com

FCC Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC RF Exposure Warning Statements

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development \Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

FCC ID: 2AZWZ-S6M
FCC ID: 2AZWZ-S6C

Radio Frequency Exposure Statement for IC

This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

• IC: 27280-S6M
• IC: 27280-S6C

Declaration Of Conformity

1. Please use the standard AC Power Chargers and Micro USB Charging Cables.
2. Do not use the device in an environment where the temperature is too high or too low, and do not expose the device to strong sunlight or an environment that is too humid.
3. The suitable ambient temperature for S6-M and accessories is -20°C to +45°C
4. The suitable ambient temperature for S6-C and accessories is -20°C to +40°C.
5. When charging, please place the device in a well-ventilated environment with normal room temperature. It is recommended to charge the device within the temperature range of 0°C~45°C.

This product is designed and manufactured with high quality materials and components, which can be recycled and reused.

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

Warranty

Warranty: 12-month limited warranty

Contact

• Manufacturer: KAWA ELECTRONICS COMPANY LIMITED
• Email: support@kawa-In.com
• Web: www.kawa-in.com
• Address: FLAT A 21/F CHEUNG LEE IND BLDG 9 CHEUNG LEE ST CHAI WAN HONG KONG

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>