Smart-AVI USB2FX-S USB 2.0 Over Fiber Extender User Manual
- June 14, 2024
- Smart-AVI
Table of Contents
USB2FX
USB 2.0 Extender over Fiber
USB2FX-S USB 2.0 Over Fiber Extender
USER MANUAL
Designed and Manufactured in the USA
1-888-994-7427
www.smartavi.com
Technical Specifications
USB
Signal Type| USB 2.0
Input Interface (TX)| (1) USB Type B (Female)
Output Interface (RX)| (4) USB Type A (Female)
SYSTEM
Extension Type| Fiber (LC-LC Duplex)
Cable Requirements| Dual Fiber
Maximum Length| Single mode: 10 km (6.2 miles), multi mode: 500 m (1640 feet)
OTHER
Power| External 100-240 VAC/5VDC3A
Dimensions| 4.3” W x 1.1” H x 2.5” D
Weight (each)| 1.5 lb
Operating temperature| 0-55 °C (32-131°F)
Storage temperature| -20-85 °C (-4-185 °F)
Humidity| Up to 95% (non-condensing)
What’s in the box?
| PART NO. | Q-TY | DESCRIPTION |
|---|---|---|
| USB2FX-TX | 1 | USB 2.0 over Fiber Transmitter. |
| USB2FX-RX | 1 | USB 2.0 over Fiber Receiver. |
| PS5VD3A | 2 | 5V 3A Power Supply |
| User Manual | 1 |
FRONT and back
INSTALLATION
USB2FX-TX Transmitter
- Power off all devices.
- Connect the KM source device (computer) to the USB2FX-TX with a USB cable using the USB-B input port.
- Insert an SFP transceiver into the SFP uplink port on the USB2FX-TX transmitter.
- Install a fiber-optic cable into the SFP transceiver attached to the USB2FX-TX transmitter.
- Connect a power supply to the USB2FX-TX.
USB2FX-RX Receiver
- Insert an SFP transceiver into the SFP uplink port on the USB2FX-RX receiver.
- Install the fiber-optic cable into the SFP transceiver attached to the USB2FX-RX receiver.
- Connect the USB2FX-RX to the desired peripherals using the USB-A output ports.
- Connect a power supply to the USB2FX-RX.
- Power on all devices.
SFP Module Swapping
Changing SFP transceiver modules does not require powering down any devices. To change SFP modules, simply disconnect them from the USB2FX-TX transmitter and USB2FX-RX receiver and connect the replacement modules to both units. Operation will resume as before.
Troubleshooting
No Power
- Make sure that the power adapter is securely connected to the power connector of the unit.
- Check the output voltage of the power supply and make sure that the voltage value is around 12VDC.
- Replace the power supply.
No Video
- Check if all the video cables are connected properly.
- Connect the computer directly to the monitor to verify that your monitor and computer are functioning properly.
- Restart the computer.
Keyboard is not working
- Check if the keyboard is properly connected to the unit.
- Check if the USB cables connecting the unit and the computers are properly connected.
- Try connecting the USB on the computer to a different port.
- Make sure that the keyboard works when directly connected to the computer.
- Replace the keyboard.
Mouse is not working
- Check if the mouse is properly connected to the unit.
- Try connecting the USB on the computer to a different port.
- Make sure that the mouse works when directly connected to the computer.
- Replace the mouse.
No Audio
- Check if all the audio cables are connected properly.
- Connect the speakers directly to the computer to verify that the speakers and the computer audio are functioning properly.
- Check the audio settings of the computer and verify that the audio output is through the speakers.
Technical support
For product inquiries, warranty questions, or technical questions, please contact info@smartavi.com.
Limited warranty statement
A. Extent of limited warranty
SmartAVI, Inc. warrants to the end-user customers that the SmartAVI product
specified above will be free from defects in materials and workmanship for the
duration of 1 year, which duration begins on the date of purchase by the
customer. Customer is responsible for maintaining proof of date of purchase.
SmartAVI limited warranty covers only those defects which arise as a result of
normal use of the product, and do not apply to any:
a. Improper or inadequate maintenance or modifications
b. Operations outside product specifications
c. Mechanical abuse and exposure to severe conditions
If SmartAVI receives, during applicable warranty period, a notice of defect,
SmartAVI will at its discretion replace or repair defective product. If
SmartAVI is unable to replace or repair defective product covered by the
SmartAVI warranty within reasonable period of time, SmartAVI shall refund the
cost of the product.
SmartAVI shall have no obligation to repair, replace or refund unit until
customer returns defective product to SmartAVI.
Any replacement product could be new or like new, provided that it has
functionality at least equal to that of the product being replaced.
SmartAVI limited warranty is valid in any country where the covered product is
distributed by SmartAVI.
B. Limitations of warranty
To the extant allowed by local law, neither SmartAVI nor its third party
suppliers make any other warranty or condition of any kind whether expressed
or implied with respect to the SmartAVI product, and specifically disclaim
implied warranties or conditions of merchantability, satisfactory quality, and
fitness for a particular purpose.
C. Limitations of liability
To the extent allowed by local law the remedies provided in this warranty
statement are the customers sole and exclusive remedies.
To the extant allowed by local law, except for the obligations specifically set forth in this warranty statement, in no event will SmartAVI or its third party suppliers be liable for direct, indirect, special, incidental, or consequential damages whether based on contract, tort or any other legal theory and whether advised of the possibility of such damages.
D. Local law
To the extent that this warranty statement is inconsistent with local law,
this warranty statement shall be considered modified to be consistent with
such law.
NOTICE
The information contained in this document is subject to change without
notice. SmartAVI makes no warranty of any kind with regard to this material,
including but not limited to, implied warranties of merchantability and
fitness for particular purpose. SmartAVI will not be liable for errors
contained herein or for incidental or consequential damages in connection with
the furnishing, performance or use of this material. No part of this document
may be photocopied, reproduced, or translated into another language without
prior written consent from SmartAVI, Inc.
20230223
SMART AUDIO VIDEO INNOVATION
Designed and Manufactured in the USA
Tel: (888)-994-7427 • 702-800-0005
2455 W Cheyenne Ave, Suite 112
North Las Vegas, NV 89032
www.smartavi.com
USB 2.0 Extender over Fiber
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>