petedu PU33 Ultrasonic Repeller Dog Barking Control Device User Manual
- June 14, 2024
- petedu
Table of Contents
NieMoPoty
Ultrasonic Dog Bark Deterrents
User Manual
PU33 Ultrasonic Repeller Dog Barking Control Device
MODEL: PU33
Hi! I am a user manual, let me tell you how to use PU33 ultrasonic dog bark
deterrents correctly.
PU3 3 ultrasonic dog bark deterrents, which uses the principle of ultrasound
to emit sound waves to interfere with the dog, so that it will feel stimulated
and stops the current behavior. For example, you can expel a dog who is coming
to you, or you can let the dog stop barking.
PU33 uses a frequency of 20-25KHZ, which is difficult for human hearing to
perceive, but it is the most sensitive frequency for dogs. But the sound will
not negatively affect the dog’s hearing or health, it is an effective and safe
product!
Remote Control
Training Mode
Training Button
- The training mode uses 20-25 kHz ultrasonic waves. After pressing the button, it will continuously release medium, low, and high ultrasonic frequencies.
- When your dog is barking or has other incorrect behaviors, you can use the training mode to interfere with the dog’s current behavior.
- After repeated interference and the owner’ s patient training, the dog will form a certain conditioned reflex, thereby reducing the number of its incorrect behavior.
- Some dogs may become immune to ultrasound, then you can switch repellent mode to continue training.
Repellent Mode
Repellent Button
- The frequency of the repellent mode will be higher and faster, and it is more suitable for the scene of deterring and expelling dogs.
- The repellent mode uses the 25kHz ultrasonic frequency. After pressing the button, the ultrasonic wave will be continuously released 7-10 times per second.
- When the ultrasonic wave is released, the LED light will flash at the same frequency.
- Ultrasonic can cover a range of 10 meters, and the best effect is used within 5 meters.
Other Functions
- The LED function of the side switch has a lighting mode, which can illuminate you when walking your dog at night, and your dog can also find you quickly.
- When using the repellent function, it will also flash with the release of the ultrasonic wave.
- The middle position of the side switch indicates that the product is in a normal use state.
- When the side switch is set to locked mode, the product will not be able to be used. If you put the product in your backpack or pocket, you can choose to lock it to avoid pressing the button.
Charging
- When the battery is lower than 20%, a red light will be displayed when using any function.
- When the battery is lower than 5%, if you continue to use the product, the status light will stay on for 5 seconds, and then auto power off.
- The red light will keep flashing when the charging cable is plugged in; until the status light turns blue, which means the device is finished charging.
- You can charge the device for 4-5 hours with an output voltage of 5V via PC, power bank, adapter, etc.
Battery
- When the device shows low power, please charge it as soon as possible.
- After fully charging, please remove the power supply as soon as possible to avoid prolonged charging.
- When the battery is damaged, do not repair or disassemble it.
- Charging time is about 4-5 hours.
- Do not use adapters larger than 5V2A to charge the product.
- This product uses an 800 mAh battery.
- Do not immerse the product in water or extreme environments (below – 1 0 ℃ or above 4 5 ℃ ) . Extreme environments may shorten the service life of the product.
Terms of Use and Limitation of Liability
- Use of this product means you accept all the terms and conditions.
- This product cannot be applied to dogs with strong anti- defense, and has no effect on older or hearing-impaired dogs.
- Different dogs may have different responses to ultrasound. For best results, you can use this product with other training tools and instructions together.
- This product is a professional dog training device and cannot be used for other purposes. Please do not violate local laws in using this product.”
- We are not responsible for any direct or indirect damages caused by the use or misuse of this product, all risks in using this product are the responsibility of the user.
- Please contact the dealer for parts service, goods return or exchange. We provide technical support only.
Frequently Asked Questions Answers
Q: How should I use this product properly?
A: Please ensure the product is powered, when the status light flashes blue, it means the product is working normally. When using it after a full charge, please note that the lock button on the right side of the product is enabled.
Q: How to get the most out of training mode?
Q: What is the role of the repellent mode?
A: If meeting a vicious dog or an annoying dog, you can use the “ repellent mode” of PU33. The repellent mode may be affected by the environment when used outdoors, such as other high-frequency sounds or other obstacles. Although it cannot be directly expelled, it will also have a significant deterrent effect on the dog.
Q: What should I do when the product does not turn on/charge normally?
A: Please check the adapter and charging cable of the product, and try replacing them to find whether it can be charged. When the product goes into charging it will flash red light.
Q: Can it be charged with other types of chargers?
A: It is not recommended that you use a charger with a voltage exceeding 5V to charge this product, because a charger with an output exceeding 9V or 12V may cause damage to this product.
Q: Does PU33 have safety properties?
A: This product is designed to guide dogs to proper behavior. The initial use may be stressful for some dogs, but not traumatic for all dogs. Appropriate appeasement when necessary. We do not recommend using this product without the dog misbehaving.
YOUR WARRANTY CARD
Here is your warranty card
Customer name: _
Purchase date: ____
Order number: ___
Customer E-mail: ___
Where did you buy? (Amazon, Walmart, Offline store)
Follow below steps to request your warranty service
- Fill this warranty card
- Send us the photo of the warranty card
After-sales team Email: [email protected]
Note: We take the quality of our products and your experience very seriously, if you have any questions, please feel free to contact us, our contact information is provided here.And we will Extended 3 months free warranty for you.
Email address: [email protected]