G-TOOLS G-kit Bonanza User Manual
- June 7, 2024
- G-TOOLS
Table of Contents
G-TOOLS G-kit Bonanza
G-kit Bonanza 0,35m2:
Specifications:
Material:
aluminum extrusion profiles patented plastic g-tools corner connectors
moist and fire-resistant PVC/XPS sandwich panels
Dimensions:
external (h x w x d): 176 X 61,5 X 61,5cm internal (h x w x d) : 161 X 58,5
X 58,5cm
Items below are only delivered when you’ve bought a complete version:
Timer
Legrand Omnirex minimum switch-on period 15 min. 230V, 50Hz, 16A maximum
capacity 3680W
Ventilator
Winflex 125 VKO inline axial ventilator, 185m3 / hour build inside the
silencer
Lighting
Lucilux 250 Watt, Roadrunner reflector, Sunkraft 250 Watt, G-bars or G-LEDs
led grow light
Filter
maximum airflow: 240 m3/hour
optimal airflow: 160 m3/hour
height: 250mm
diameter filter: 190mm
diameter flange: 125mm
weight: 1,5kg
Warranty procedure:
G-tools offers a 2 years warranty on all components of the Bonanza except
bulbs and filters. Please contact your G-tools rep to explain the problem as
there might be an easy fix without having to replace it apart.
Maintenance and safety regulations:
The G-Kit Bonanza is a maintenance-free object. Never the less there are a few
factors to take into account.
– Only use grounded wall outlets to plug the Bonanza in.
– Do not plug the Bonanza into the wall outlet until the machine is fully
assembled and you have read the instructions.
– Avoid contact of water with all electrical equipment
– When changing the light bulb always unplug the Bonanza from the wall outlet.
– Make sure the light bulb has had plenty of time to cool of before touching
it.
– After screwing in the HPS bulb wipe fingerprints off the bulb with a clean
dry cloth to ensure its full life.
– Wait 20 minutes after the light has turned off before turning it on again.
– It’s recommended that no more than 1 G-Kit Bonanza goes on a single 15A
breaker. We also recommend the Bonanza is plugged into a surge protector. This
will protect the machine from any power spikes due to storms, power outages,
etc.
Box A: top + bottom panelbox 62 x 62 x 30cm
Box B: panels box 120 x 73 x 5cm
Total packing 2 boxes (without box or pallet)
*Items marked with a are only part of a complete version.**
G-kit Bonanza installation instructions:
1. General:
To prevent transport damage the bottom and roof of the cabinet are connected with 4 aluminum profiles. These profiles serve no further purpose and can be thrown away.
Push the 4 aluminum adjustable feet on the plastic insert connectors
underneath the bottom panel.
Place the 4 aluminum angle profiles (50,5cm) on the 4 connectors and place
the side and back panels. The angle
profile on the right front side should have its double lips
on the front side. The latch of the lock falls behind the double lips.
Make a ring with the 4 flat profiles (53,4cm) and the 4-way connectors.
Place the ring on top of the 4 profiles and push tight.
Place the 4 aluminum angle profiles (100 cm) on the connectors and place the
side panels and the back panel with the holes. The angle profile on the right
front side should have its double lips on the front side. The latch of
the lock falls behind the double lips.
Place the roof panel (with the filter, light, and timer) on top of the angle profiles and push tight. Mount the 3 G-tools air inlets (see chapter 2)
Pull the electrical cord through the cable through the entry. (only when you’ve bought the complete version) Mount the cable through entry in the 21mm hole in the back panel of the cabinet and mount the supplied plug.
Push the flange through the hole in the back panel into the silencer. From
outside to within.
Hang the lamp, set the timer (chapter 3), and place the doors (chapter 3 and
4)
Overview installation components:
2. The air inlets
Each air inlet consists of 2 parts.
• Push part 1 inwards through the hole in the back.
• Push part 2 on part 1 and twist & lock.
3. Setting the timer
a. Set the switch on the right side of the timer at the clock symbol.
b. Set the current time by turning the dial of the timer.
c. The pins in the outer ring mean:
Positioned outside OFF
Positioned inside ON
Set the timer for lights ON by pushing the pins inward
4. Installing the locks
Before the doors can be installed the locks have to be mounted. The locks are
pushed through the 19 mm holes on the sides of the doors first. The top door
has two locks and the bottom door one. The side with the black sealing strip
is the inside of the door. The side of the lock with the keyhole should be on
the outside of the door. On the inside of the door, the locks are fixed with
the supplied nut. The latch should be fixed horizontally, pointing outward
when the lock is in its locked position. So when the key can be pulled from
the lock.
5. Installing the doors
At the left side of each door are 4 holes of 1 mm. This is where the hinges
should be fixed with the 10 mm screws. Before mounting the doors the cabinet
should first be leveled using the adjustable feet. Hold the doors in their
position and screw the hinges in the aluminum profiles with a cordless drill
and the supplied self-tapping screws. This can best be done with the help of a
second person that holds the door in its position while the other person
tightens the screws.
6. Connecting the wall socket
The wire of the wall socket mounted at the ceiling of the cabinet has no plug
yet. Before it can be mounted the cable through (picture 7) first has to be
installed in the 22mm hole in the back panel of the cabinet. Now the cable can
be pulled through and the plug mounted.
Frequently asked questions (F.A.Q.)
How much will my electricity bill go up?
For a G-kit Bonanza 0,35m2 model with 250 W HPS: When the lights are on for an
average of 14/hours /day: approx.. 25,-/ month For a G-kit Bonanza 0,35m2
model with G-bars 100W: When the lights are on for an average of 14/hours
/day: approx.. 9,-/ month
Won’t the cabinets get too warm?
Normally it gets 5 to 6 degrees warmer inside the cabinet than outside. It’s
best to have it in a room where you can leave a window open. If you have more
than one G-Kit in a room make sure that the light of one switch on when the
light of the other switches off (the lights are on 12 hours a day).
The humidity is too low, what to do?
Especially in the beginning, it is important the plant gets enough water. To
spray them with water in the first two weeks is the best.
Is it possible to put a G-kit in a barn or garage?
No problem, make sure there is enough fresh air and keep it warm in the
winter.
Do I get a warranty?
There’s a one-year warranty on all electrical equipment except for the light-
bulb and filter. New parts shall be sent to you after the broken parts have
been received at the distribution center.
Contact:
For all your questions visit our website
www.g-tools.nl or send an e-mail to:
info@g-tools.nl
WEEE registration number: DE 68161470
The symbol of the crossed-out wheelie bin on electrical and electronic equipment means that it mustn’t be removed from household waste. There are free collection points for the return of WEEE available nearby. Please inquire at your city or municipality about the addresses. You can also contact us regarding other options to return old equipment. By a separate collection of WEEE, the reuse and recycling of old equipment are made possible and any negative impact on the environment and human health due to hazardous substances in old equipment is eliminated. You are responsible for the erasure of any private data which could still be stored on old equipment. Further information can be found on www.elektrogesetz.de.
References
- 📧info@g-tools.nl
- Sterk in Staal - Kaltenbach Tools B.V.
- Startseite - Das neue Elektrogesetz (ElektroG, WEEE) 2024
- Startseite - Das neue Elektrogesetz (ElektroG, WEEE) 2021
- G-Tools Kweekkasten - Hoogste kwaliteit gegarandeerd
- Redirect Notice
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>