SIEMENS SN25ZI08CE Dishwasher User Manual

SN25ZI08CE Dishwasher

User Manual

SN25ZI08CE Dishwasher

Siemens Home Appliances

<http ://siemens-home.bsh-group.com/welcome>

Refer to the Digital User’s Guide for more information.

https://digitalguide.bsh-group.com/?mat- no=9001837129&brand=SIEMENS&name=Dishwasher&vib=SN25ZI08CE&default=nl

Safety

Please observe the following safety instructions.

1.1 General instructions
¡Read this manual carefully.
¡Keep the operating instructions and product information for future reference for use or for subsequent owners.
¡Do not connect the device in case of transport damage.

1.2 Destination of the device
Only use the device: ¡to wash dishes.
¡for domestic use and in enclosed spaces within the home sable environment.
¡up to an altitude of 2500 m above sea level.

1.3 Restriction of Users
This appliance can be operated by children aged from 8 years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and/or knowledge if they are supervised or have been instructed in the safe use of the appliance and understand the resulting hazards. understood. Children must not play with the appliance.
Cleaning and user maintenance must not be made by children unless they are supervised.
Make sure that children under the age of 8 cannot reach the device or the connection cable.

1.4 Secure installation
WARNING ‒ Risk of injury! Improper installations can cause injury.
▶ When setting up and connecting the device, follow the instructions in the operating and installation instructions.
WARNING ‒ Risk of electric shock! Improper installations are dangerous.
▶ Only connect and operate the device in accordance with the information on the rating plate.
▶ Always use the power cord supplied with the new device.
▶ Only connect the device to an alternating current mains via a properly installed socket with earthing contact.
▶ The protective earthing system of the domestic electrical installation must be installed in accordance with the electrotechnical regulations.
▶ Never power the device through an external switching device, e.g. a time switch or remote control.
▶ When the appliance is installed, the mains plug of the mains connection cable must be freely accessible, or if free access is not possible, a disconnection device must be installed in the permanently installed electrical installation in accordance with the installation instructions.
▶ When setting up the device, make sure that the mains cable is not pinched or damaged.
Cutting the supply hose or immersing the Aqua Stop valve in water is dangerous.
▶ Never immerse the plastic housing in water. There is an electric valve in the plastic housing on the inlet hose.
▶ Never cut the inlet hose. There are electrical connection cables in the supply hose.

WARNING ‒ Risk of fire!
Using an extended power cord and unauthorized adapters is dangerous.
▶ Do not use extension cords or multiple sockets.
▶ Only use adapters and power cords approved by the manufacturer.
▶ If the power cord is too short and a longer power cord is not available, contact an electrical retailer to adjust the home installation.

Contact between the device and installation pipes can lead to failure of the installation pipes, for example gas pipes and power pipes. Gas from a corroded gas pipe can ignite. A damaged power line can lead to a short circuit.
▶ Make sure that there is a distance of at least 5 cm between the device and the installation pipes.
WARNING ‒ Risk of burns! Improper installation can lead to burns.
▶ For free-standing appliances, make sure that the back of the appliances is against a wall.

1.5 Safe use
WARNING ‒ Risk of serious health hazard!
Non-compliance with the safety instructions and instructions for use on the packaging of dishwasher detergents and rinse aids can lead to serious health damage.
▶ Observe the safety instructions and instructions for use on the detergent and rinse aid packaging.
WARNING ‒ Risk of explosion!
Solvents in the rinsing chamber of the device can lead to explosions.
▶ Never put solvents in the washing area of the appliance.
Strongly corrosive alkaline or strongly acidic cleaning agents in combination with aluminum objects in the washing area of the appliance can lead to explosions.
▶ Never use strongly corrosive alkaline or strongly acidic cleaning agents, especially those for professional or industrial use, in combination with aluminum objects (e.g. grease filters of extractor hoods or aluminum pans) in the dishwasher, e.g. for machine maintenance.
WARNING ‒ Risk of injury! An open appliance door can lead to injuries.
▶ Only open the appliance door to load and unload dishes in order to avoid accidents such as tripping.
▶ Do not sit or stand on the open appliance door. Knives and objects with sharp points can cause injuries.
▶ Place knives and objects with sharp points with the points down in the cutlery basket, knife holder or cutlery drawer.
WARNING ‒ Risk of burns!
If the appliance door is opened while the program is running, hot water may splash out of the appliance.
▶ Only open the appliance door carefully during the program run.
WARNING ‒ Danger of tipping over!
Overloaded crockery baskets can cause the appliance to tip over.
▶ Never overload the crockery baskets of free-standing appliances.
WARNING ‒ Risk of electric shock! Penetrating moisture can cause an electric shock.
▶ Only use the device in closed rooms.
▶ Never expose the device to excessive heat and humidity.
▶ Do not use a steam cleaner or high-pressure cleaner to clean the appliance.
Damaged insulation of the power cord is dangerous.
▶ Never bring the power cord into contact with hot device parts or heat sources.
▶ Never bring the power cord into contact with sharp points or edges.
▶ Never kink, crush or modify the power cord.
WARNING ‒ Risk of burns!
The blowout of the zeolite reservoir becomes hot and can cause burns.
▶ Never touch the blow-out opening of the zeolite reservoir.

1.6 Damaged device
WARNING ‒ Risk of electric shock!
A damaged device or power cord is dangerous.
▶ Never use a damaged device.
▶ Never use a device with a cracked or broken surface.
▶ Never pull on the power cord to disconnect the device from the power supply. Always pull the plug on the power cord.
▶ If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box and close the tap.
▶ Contact the service department. →Page 53 Improper repairs are dangerous.
▶ Only trained specialist personnel may carry out repairs on the device.
▶ Only original spare parts may be used for repairing the device.
▶ If the mains connection cable or device connection cable of this device becomes damaged, it must be replaced with a special power connection cable or special device connection cable available from the manufacturer or customer service.

1.7 Dangers for children
WARNING ‒ Risk of suffocation!
Children can pull packaging material over their heads and become entangled and suffocated.
▶ Keep packaging material away from children.
▶ Do not let children play with packaging material. Children can inhale or swallow small parts and suffocate.
▶ Keep small parts away from children.
▶ Do not let children play with small parts. Children can lock themselves in the device and suffocate.
▶ If present, use the child lock.
▶ Never allow children to play with or operate the device.
WARNING ‒ Risk of health hazard! Children can lock themselves in the appliance and endanger their lives.
▶ In the case of discarded appliances, unplug the mains cable, then cut the mains cable and damage the appliance door lock to such an extent that the appliance door no longer closes.
WARNING ‒ Risk of crushing!
Children can become trapped between the appliance door and the cabinet doors below with high-mounted appliances.
▶ Watch out for children when opening and closing the appliance door.
WARNING ‒ Risk of chemical burns! Dishwasher and rinse aids can cause burns to the mouth, throat and eyes.
▶ Keep children away from detergents and rinse aids.
▶ Keep children away from the opened device. The water in the wash cabinet is not drinking water. Residues of detergent and rinse aid may still be present in this.
WARNING ‒ Risk of injury!
Children can get their little fingers caught in the slots of the tablet tray and injure themselves.
▶ Keep children away from the opened device.

Material damage to avoid

2.1 Secure Installation
NB!
Improper installation of the device can lead to damage.
▶ If the dishwasher is installed below or above other household appliances, the information on installation in combination with the dishwasher in the installation instructions for the respective household appliance must be observed.
▶ If no information is available or if the installation instructions do not contain any instructions on this subject, check with the manufacturer of these household appliances whether the dishwasher can be installed above or below other household appliances.
▶ If no information from the manufacturer is available, the dishwasher must not be installed above or below these household appliances.
▶ To ensure safe operation of all household appliances, you must also follow the installation instructions for the dishwasher.
▶ Do not install the dishwasher under a hob.
▶ Do not install the dishwasher near heat sources such as radiators, water heaters, cookers or other appliances that give off heat.
Contact between the unit and water pipes can lead to corrosion of the water pipe and the water pipe may leak.
▶ Make sure there is a distance of at least 5 cm between the appliance and the water pipe. This does not apply to the supplied pipes for the drinking water connections and the water drain connection.
Modified or damaged water hoses can lead to material damage and damage to the device.
▶ Never kink, pinch, alter or cut water hoses.
▶ Only use the supplied water hoses or original replacement hoses.
▶ Reuse never used water hoses.
A water pressure that is too low or too high can hinder the function of the device.
▶ Make sure that the water pressure at the water supply installation is at least 50 kPa (0.5 bar) and at most 1000 kPa (10 bar).
▶ If the water pressure exceeds the specified maximum value, a pressure reducing valve must be installed between the drinking water connection and the hose set of the device.
2.2 Safe use
NB!
Escaping water vapor can damage built-in furniture.
▶ After the program has ended, allow the appliance to cool down briefly before opening the appliance door.
The rinse aid container can be corroded by softening salt for dishwashers.
▶ To ensure that any spilled softener salt is flushed out of the rinse aid container, the the softening salt must be filled into the softening salt container immediately before the program starts.
Dishwasher detergent can damage the water softener.
▶ Only fill the water softener tank with softening salt for dishwashers.
Unsuitable detergents can damage the appliance.
▶ Do not use a steam cleaner.
▶ To avoid scratches, do not use sponges with a rough surface or abrasive cleaners on the surface of the device.
▶ To prevent corrosion in dishwashers with a stainless steel front, do not use sponge cloths or rinse them well several times before using for the first time.

Environmental protection and savings

3.1 Disposal of the packaging
The packaging materials are environmentally friendly and can be reused.
▶ Dispose of the individual components separately by type.
3.2 Saving energy
If you follow these instructions, your appliance will use less electricity and water.
Use the Eco 50° programme. a The Eco 50° program is enerenergy-saving and environmentally friendly.
→”Programs”, page 19
Zeolite drying automatically contributes to energy savings.
a→”Drying with zeolite “, Page 11
3.3 Zeolite drying
The device is equipped with a zeolite reservoir. Energy can be saved by means of zeolite drying.
Zeolite is a mineral that can store and release moisture and heat energy.
During the washing phase, heat energy is used to heat the washing water and dry the mineral.
During the drying phase, moisture from the rinse chamber is stored in the mineral and heat energy is released. The heat energy is blown out into the wash chamber with dry air.
This enables rapid and improved drying.
Zeolite drying is therefore very energy-saving.
Tip: To ensure that the zeolite drying works properly, do not place any dishes directly in front of the suction opening and outlet opening of the zeolite reservoir.
Do not place temperature-sensitive dishes directly in front of the blow-out opening of the zeolite reservoir.
→”Device”, page 14

Set up and connect

For correct use, connect the device to electricity and water in a professional manner. Observe the required criteria and the installation instructions.
4.1 Scope of delivery
After unpacking, check all parts for transport damage and the completeness of the delivery.
For complaints, please contact the store where you bought the device or our customer service.
Remark: The device has been checked at the factory for correct operation. This may leave water stains on the device. The water stains disappear after the first wash cycle.
The delivery consists of:
¡Dishwasher
¡Instructions
¡Assembly instructions
¡Other documents containing information tie
¡Mounting material
¡Salt filling aid funnel
¡Connection cord
¡Quick guide

4.2 Setting up and connecting the device
You can install your substructure or built-in appliance in the kitchen unit between wooden and plastic walls. If you subsequently set up the device as a free-standing device, you must secure the device against tipping over, e.g. by screwing it to the wall or installing it under a continuous worktop that is permanently connected to the adjacent cabinets.

1. Observe the safety instructions. → Page 4

2. Observe the instructions for the electrical connection.

3. Check the contents of the package and the condition of the device.

4. The required installation dimensions can be found in the installation instructions.

5. Level the appliance using the adjustable feet.
   Pay attention to a firm stand.

6. Install the drain water connection. →Page 12

7. Install the drinking water connection. →Page 13

8. Connect the device to the power.

4.3 Drain water connection
Connect the appliance to a drain water connection so that the dirty washing water can be drained away.

Install waste water connection

1. You will find the necessary steps in the supplied installation manual.
2. Connect the drain hose to the connection nipple of the siphon using the parts supplied.
3. Make sure that the drain hose is not kinked, crushed or tangled.
4. Make sure that the water is not prevented from flowing out by a plug in the waste water connection.

4.4 Drinking water connection
Connect the device to a drinking water connection.
Install drinking water connection Remark
¡If you replace the device use a new water supply hose.

1. You will find the necessary steps in the supplied installation manual.

2. Connect the device to the drinking water connection using the enclosed parts.
   Observe the technical data.

3. Make sure that the drinking water connection is not kinked, crushed or entangled.

4.5 Electrical connection
Connect the device electrically Comments
¡Take the safety rules →Page 4in mind.
¡Please note that the protection system only works when the device is supplied with power.

1. Connect the appliance plug of the connection cable to the appliance.

2. Insert the mains plug of the appliance’s connecting cable into a socket in the vicinity of the appliance.
   The connection data of the device can be found on the rating plate.

3. Check the mains plug for tightness.

Get to know your device

5.1 Device
Here you will find an overview of the components of your device.

1| Type plate| Type plate with E number and FD number →Page 53.
You need this information for the service department →Page 53.
---|---|---
2| Detergent dispenser| Pour the detergent into the detergent dispenser.
→”Detergent”, page 29
3| Lower crockery basket| Lower crockery basket →Page 24
4| Reservoir for softener thing salt| Add softening salt to the water softener salt reservoir.
→”Softening system”, page 25
5| Lower spray arm| The lower spray arm cleans the dishes in the lower basket.
If the dishes are not cleaned optimally, clean the spray arms.
→”Clean the spray arms”, page 44
6| Tablet tray| During the wash cycle, tabs automatically fall from the detergent compartment into the tablet compartment where the tabs can dissolve optimally.
7| Upper crockery basket| Upper basket →Page 23
8| Cutlery tray| Cutlery drawer →Page 25
9| Etagere1| Etagere →Page 23
10| Upper spray arm| The upper spray arm cleans the dishes in the upper basket.
If the dishes are not cleaned optimally, clean the spray arms.
→”Clean the spray arms”, page 44
11| suction opening of the zeolite reservoir| The suction opening is used for drying with zeolite →Page 11.
12| Blow-out opening of the zeolite reservoir| The outlet opening is used for drying with zeolite →Page 11.
13| sieving system| Sieve system →Page 43
14| Reservoir for gloss flushing agent| Pour rinse aid into the rinse aid reservoir.
→”Rinse system”, page 28

5.2 Controls
You can use the control panel to set all the functions of your device and obtain information about the operating status.
Some keys perform various functions.

1| ON/OFF key and Reset- test Reset 4 sec.| Switch on device →Page 34 Switch off device →Page 36 Cancel program →Page 36
---|---|---
2| Program keys| Programs →Page 19
3| display| Information about the remaining time or basic settings is shown in the display. You can change the basic settings via the display and the adjustment buttons.
→”Change basic settings”, page 39
4| WLAN indication| Home Connect →Page 39
5| | indication or w r supply
6| Softening indicator gadd salt to fill| softening system eem
→”softening z fill out”, Page 26
7| Program tkeys and extra functions| Program ammos moms”, page 19
→”Program s Additional function ctions”, page 22
→”Additional fun
8| Start key Start| Start program →Page 35
9| Test Setup 3 sec.| If you for approx. 3 seconds button opens the basic settings.
→”Change basic settings”, page 39
10| **** Remote Start| →”Remote Start”, page 40
11| Select start time| Create time setting →Page 35
12| Top up rinse aid indicator| Final rinse system
→”Filling with rinse aid”, page 28
13| Door handle1| Open the appliance door.

Symbols on the display1
Depending on the device version, the display shows the following symbols. Find the explanation for this.

Symbol Description

| If the symbol for machine maintenance burns, then perform machine maintenance.
→”Machine cleaning “, page 41
| When the rinse aid refill indicator lights up on the display, refill rinse aid.
→”Filling with rinse aid”, page 28
| When the refill water softener salt indicator lights up on the display, fill in the water softener salt the water softener salt reservoir immediately before the program starts.
→”Filling with softening salt”, page 26
| If the device with a wireless WLAN home network is connected, the symbol lights up in the display.
→”Home Connect”, page 39
| If you have activated the time preselection, the symbol lights up in the display.
→”Make time setting”, page 35
| When you have started a programme, the symbol lights up in the display.
| If you have activated the key lock,
the symbol lights up in the display.
→”Activate key lock”, page 35
| If a fault occurs in the water supply or water drainage, the symbol lights up or flashes on the display.
→”Troubleshooting”, page 45

Programs

Here you will find an overview of the adjustable programs. Depending on the configuration, different programs are offered on the machine’s control panel. The running time depends on the selected program. In addition, the running time depends on the water temperature, amount of dishes, degree of soiling and selected extra function →Page 22. Also a deactivated rinse system or lack of rinse aid affects the running time.
The consumption values can be found in the quick guide. The consumption values apply to normal conditions and a water hardness of 13
– 16 °dH. Various factors, such as water temperature or pipe pressure, can lead to deviations.

¡pots, pans, non-sensitive crockery and cutlery Degree of pollution: ¡very encrusted, burnt-in or dried-on starch or protein containing food residues| Intensive:
¡Pre-rinse
¡Cleaning 70 °C ¡
Intermediate rinse
¡Rinse rinse
50°C
¡To dry
Auto
Auto 45-65°| China:
¡mixed crockery and cutting
Degree of pollution: ¡slightly dried, in the home keep usual food scraps| Sensor Optimized sed:
¡Become dependent of the degree of pollution of it dishwater optimized by it sensor system.
Eco
Eco 50°| China:
¡mixed crockery and cutting Degree of pollution:
¡slightly dried, in the home keep usual food scraps| Most economical program:
¡Pre-rinse
¡Cleaning 50 °C ¡ Intermediate rinse
¡Rinse rinse 35°C
¡To dry

Speed   65°| China:
¡mixed crockery and cutting Degree of pollution:
¡slightly dried, in the home keep usual food scraps| Time-Optimized:
¡Cleaning 65 °C ¡ Intermediate rinse
¡Rinse rinse 69°C
¡To dry
Speed   45°| China:
¡sensitive crockery, cutlery, temperature-sensitive plastics
and glasses Degree of pollution:
¡little caked fresh leftover food| Time-Optimized: ¡Cleaning 45 °C ¡ Intermediate rinse ¡Rinse rinse 50°C

Machine cleaning| Use only with empty device.| Machine cleaning 70°C
favourite| →”Favorite”, page 20| –

Remark: The relatively longer running time of the Eco 50° program is the result of longer soaking and drying times. These enable optimum consumption values.

6.1 Instructions for test institutes
Test institutes receive instructions for comparison tests, e.g. according to EN60436.
This concerns the conditions for carrying out the tests, not the results or the consumption values.
Inquiry by e-mail to: dishwasher@testappliances.com The product number (ENr.) and the production number (FD) are required, which you will find on the rating plate on the appliance door.

6.2 Favourite
Under the key **** can you combine save the nation of a program and additional function.
Save the program via the Home Connect app or on the appliance.

The Pre-rinse program is stored under this button at the factory. Pre-rinse is suitable for all types of crockery. The dishes are pre-cleaned by cold rinsing.
For downloaded programs and in the delivery state, the program name is displayed in the app. The display alternates between “APP” and the remaining time.
Tip: You can download additional programs via the Home Connect app and store them under the **** button.1

favourite on the device save

1. Press.
2. Press the program button.
3. Press the button for the desired additional function.
4. press for 3 seconds ****.

a The selected program and the additional function flash. a flashes.
a The program and the additional function have been saved.
Tip: To reset the program to the prewash program saved at the factory, you can use the Home Connect app1or reset the device to factory settings.

Additional functions

Here you will find an overview of the adjustable additional functions. Depending on the configuration, various additional functions are offered on the machine’s control panel. Depending on the programme, you can select certain additional functions.

crockery, e.g. heavily soiled pots and pans in the lower basket and load normally soiled crockery in the upper basket.
¡The spray pressure in the lower basket is increased and the maximum program temperature maintained longer. This increases the running time and energy consumption.
| Gloss Dry| ¡To prevent stains and to speed up drying improve, the amount of water is increased and the drying phase is extended.
¡Energy consumption is increasing. ¡Use rinse aid.
| VarioSpeedPlus| ¡The running time depends on the dishwashing program with 15% to 75%1shortened. ¡The additional function can be activated before the program start or be activated at any time during the program run.
¡Water consumption and energy consumption are being increased.

Equipment

Here you get an overview of the possible equipment of your device and the way in which you use it. The equipment depends on your device variant.

8.1 Upper crockery basket
Place cups, glasses and small dishes in the upper basket.

You can adjust the height of the upper crockery basket to make room for larger crockery.
Adjust the upper basket with the side handles
To wash large items of crockery in the crockery baskets, you can adjust the shelf height of the upper crockery basket.

1. Pull out the upper basket.
2. Hold the crockery basket on the sides at the top edge to prevent the crockery basket from falling off jerkily.
3. Press the levers on the left and right on the outside of the basket inwards.
4. Lower or raise the basket evenly to the desired position.Make sure that the upper basket is at the same height on both sides.
5. Release the lever. a The crockery basket clicks into place.
6. Push in the upper basket.

8.2 Etagere
Use the etagere and the space below to store small cups and glasses or for larger pieces of cutlery such as ladles or cutting cutlery.

If you don’t need the etagere, you can fold it up.

8.3 Lower crockery basket
Place pans and plates in the lower basket.

Large plates with a diameter of up to 31 cm can be placed in the lower basket as shown.

8.4 Foldable plate supports
Use the foldable plate supports to safely store crockery such as plates.

You can fold down the foldable plate supports for better storage of pans, dishes and glasses.1
Fold down folding plate supports1
If you don’t need the foldable plate supports, fold them over.

1. Push the lever forward and fold down the foldable plate supports .
2. To use the foldable plate supports again, fold them up.
   a The foldable plate supports click audibly into place.

8.5 Cutlery tray
Arrange the cutlery in the cutlery drawer.Place the cutlery with the pointed and sharp side down.

Before first use

9.1 Commissioning for the first time
When using the device for the first time or resetting it to factory settings, you must make settings.
Tip: Connect your device to a mobile end device. You can easily make all settings via the Home Connect app.

Required: The device is set up and connected. →Page 12

1. Fill with softening salt.
   →Page 26

2. Fill with rinse aid.
   →Page 28

3. Switch on device.
   →Page 34

4. Set water softening.
   →Page 26

5. Set amount of rinse aid. →Page 29

6. Fill the detergent
   →Page 29.

7. Start the program with the highest cleaning temperature without dishes.
   We recommend that you use the appliance without dishes before using it for the first time due to possible water stains and other residues.

Tip: You can change these settings and other basic settings →Page 37 change at any time.

Softening system

Hard, calcareous water leaves limescale residues on the dishes and the rinse aid container and can clog parts of the appliance. For good dishwashing results, you can soften water with the water softener and softener salt. To prevent damage to the appliance, water with a hardness of more than 7 °dH must be softened.

10.1 Overview of the water hardness settings
Here you will find an overview You can determine the water hardness with a w ight of the adjustable water hardness values. obtain this from your local water supply company or water hardness tester.

Remark: Set the appliance to the determined water hardness.
→”Set water softening”, page 26
With a water hardness of 0 – 6 °dH, you do not need to use softening salt for dishwashers and you can switch off the water softening.
→”Switch off water softening”, page 27

10.2 Setting water softening
Set the device to the water hardness.

1. Determine the water hardness and the desired setpoint.
   →”Overview of the water hardness settings”, page 25

2. Press ****.

3. Approx. up for 3 seconds Setup 3 sec. Busy to access basic settings.
   a The display shows Hxx. a appears on the display displayed to give.

4. Just as often Start press until the desired water hardness is set.
   The factory setting is H04.

5. To save the settings, press for approx. 3 seconds to press.

10.3 Water softener salt
You can soften the water with softening salt.

Fill softener salt
If the refill salt indicator lights up, refill the salt in the salt reservoir immediately before the program starts. The consumption of softening salt depends on the water hardness.
The higher the water hardness level, the higher the consumption of softening salt.

NB!
Dishwasher detergent can damage the water softener.
▶ Only fill the water softener tank with softening salt for dishwashers. The rinse aid container can be corroded by softening salt for dishwashers.
▶ To ensure that any spilled softener salt is rinsed out of the rinse aid container, the softener salt must be filled into the softener salt container immediately before the program starts.

1. Unscrew and remove the lid of the softener salt reservoir.

2. When using for the first time: fill the tank completely with water.

3. Remark: Only use softening salt for dishwashers.
   Do not use salt tablets. Do not use table salt.
   Put the softening salt in the softening salt tank.Completely fill the softening salt reservoir with softening salt. The water in the reservoir is displaced and flows away.

4. Fit the reservoir lid and screw it shut.

10.4 Switch off water softening
If the refill water softener indication bothers you, for example if you use a combined detergent with salt component, you can switch off the softening salt indicator.

Remark
To prevent damage to the appliance, only switch off the water softener in the following cases:
¡The water hardness is max. times 21 °dH and you use a combined detergent with salt substitutes. Combined detergents with salt substitutes can only be used according to the manufacturer’s instructions up to a hardness level of 21 °dH without adding softening salt.
¡The water hardness is 0 – 6 °dH. You do not need to use water softener salt.

1. Press ****.

2. Approx. up for 3 seconds Setup 3 sec.
   Busy- to access basic settings.
   a The display shows Hxx. a appears on the display displayed to give.

3. Just as often Start press until
   the display shows H00.

4. To save the settings, press for approx. 3 seconds to press.
   a The water softener is switched off switched on and the salt refill indicator is deactivated.

10.5 Regenerating the softening system

To maintain trouble-free operation of the water softener, the device regularly regenerates the water softener.
The softening system is regenerated in all programs before the end of the main wash cycle. This increases the running time and the consumption values of, for example, water and electricity.
Overview of the consumption values when regenerating the softening system Here you will find an overview of the maximum additional running time and consumption values when regenerating the softening system.

The consumption values stated are laboratory measured values, which are determined according to the currently valid standard and based on the Eco 50° program and the factory set water hardness value of 13 – 16 °dH.

Final rinse system

11.1 Rinse aid
For optimum drying results, you should use the best rinse aid. Only use rinse aid for domestic dishwashers.

Fill rinse aid
If the rinse aid refill indicator lights up, refill rinse aid. Only use rinse aid for domestic dishwashers.

1. Press and lift the lip on the lid of the rinse aid dispenser .

2. Top up the rinse aid up to the max mark.

3. If rinse aid has overflowed, it must be removed from the rinse aid container.
   Overflowing rinse aid can lead to excessive foaming during the wash cycle.

4. Close the lid of the rinse aid reservoir.
   a The lid clicks audibly into place.

11.2 Setting the amount of rinse aid
If streaks or water stains remain on the dishes, adjust the amount of rinse aid.

1. Press .

2. Approx. up for 3 seconds Setup 3 sec.
   Busy- to access basic settings.
   a The display shows Hxx. a appears on the display displayed to give.

3. Just as often Setup 3 sec. to press until the display shows the factory set value r05.

4. Just as often press until the desired amount of rinse aid is set.
   – At a low setting, less rinse aid is added during the wash cycle, which reduces streaks on the dishes.
   – At a higher setting, more rinse aid is added during the wash cycle, reducing water stains and improving drying results.

5. To save the settings, press for approx. 3 seconds to press.

11.3 Switching off the rinse aid system
If the rinse aid refill indicator bothers you, e.g. if you use a combined detergent with rinse aid rinse aid component, you can switch off the rinse aid system.
Tip: The function of the rinse aid is limited in combined detergents. You will usually achieve better results by using rinse aid.

1. Press ****.

2. Approx. up for 3 seconds Setup 3 sec.
   Busy- to access basic settings.
   a The display shows Hxx. a appears on the display displayed to give.

3. Just as often Setup 3 sec.
   to press  until the display shows the factory set value r05.

4. Just as often Start press until  The display indicates r00.

5. To save the settings, press for approx. 3 seconds to press.
   a The rinse aid system is deactivated switched on and the rinse aid refill indicator is deactivated.

Detergent

12.1 Suitable dishwasher detergents
Only use detergents that are suitable for dishwashers. Suitable for both non- combined and combined detergents.
For optimal washing and drying results, use a non-combined detergent in combination with separate water softener salt
→Page 26and rinse aid
→Page 28.

Modern, powerful dishwasher detergents usually have a low alkaline recipe with enzymes. Enzymes break down starch and dissolve proteins. Oxygen-based bleaching agents are usually used to remove colored stains (e.g. tea or ketchup).
Remark: Follow the manufacturer’s instructions for any detergent.
Tip: Suitable detergents are available online via our website or after- sales service →Page 53.
tabs
Tabs are suitable for all dishwashing tasks and do not need to be dosed.
With shortened programs, tabs may not dissolve completely, leaving detergent residue. This can negatively affect the cleaning effect.
Dishwasher powder
Powder detergent is recommended for shortened programmes.
The dosage can be adjusted according to the degree of soiling.
Liquid dishwashing detergent
Liquid detergents work faster and are recommended for shortened programs without a pre-rinse phase.
It may happen that a liquid detergent that has been filled in runs out of the detergent dispenser despite the lid being closed. This is not a malfunction and is not serious if you observe the following: ¡Select only one program without pre-rinse phase.
¡Do not make any time setting for the program start.
The dosage can be adjusted according to the degree of soiling.
Non-combined dishwashing detergent
Non-combined detergents are products that do not contain any other components apart from the actual detergent. Examples of this are dishwasher powder or liquid dishwasher detergent.
With powder and liquid detergent, the dosage can be adjusted to the degree of soiling of the dishes.
For better washing and drying results and to prevent damage to the appliance, it is recommended that you also use water softening salt →Page 26 and rinse aid →Page 28to use.
Combined dishwasher detergent
In addition to traditional non- combined detergents, a number of products with additional functions are offered. In addition to cleaning agent, these products also contain rinse aid and salt substitutes (3in1) and, depending on the combination (4in1, 5in1, …), additional components such as glass protection or stainless steel polish. According to the manufacturer’s specifications, combined detergents generally only function at water hardnesses of 21 °dH. If the water hardness exceeds 21 °dH, you must add softening salt and rinse aid. For optimum washing and drying results, we recommend using softening salt and rinse aid from a water hardness of 14 °dH. If you use combined detergents,

12.2 Unsuitable detergent
Do not use detergents that could damage the appliance or harm your health.
Hand dishwashing liquid
Hand dishwashing liquid can lead to increased foaming and damage the appliance.
Chlorinated dishwasher detergent
Chlorine residues on crockery can endanger your health.

12.3 Notes on detergents
For daily use, follow the instructions regarding the detergents.
¡Detergents with the indication thing “Bio” or “Eco” usually cotain (for environmental reasons) lower amounts of active substances or some substances do not even exist at all. This may limit the cleaning effect.
¡Set the rinse aid system and the water softener to the non-combined or combined detergent used.
¡Combined dishwasher detergents according to the manufacturer’s instructions, salt substitutes can only be used up to a certain degree of hardness, usually 21 °dH, without the addition of water softener salt. For optimum washing and drying results, we recommend using softening salt from a water hardness of 14 °dH.
¡Hit dishwashing detergents with an in water-soluble protective packaging only with dry hands and place only in a dry detergent dispenser to prevent the packaging from sticking.
¡Even when the gloss add rinse aid and the refill softener salt indicator lights up, the washing programs run smoothly when using combined detergents.
¡The function of rinse aid is limited for combined detergents.
You will usually achieve better results by using rinse aid.
¡Use tabs with special drying performance.

12.4 Filling detergent

1. To open the detergent dispenser, press the lock.

2. Place detergent in the dry detergent dispenser. If you use tabs, one tablet is sufficient. Place tabs across the tray.
   When using powder or liquid detergent, follow the manufacturer’s dosing instructions and the dosing format of the detergent dispenser.
   With a normal degree of soiling, 20 ml – 25 ml of detergent is sufficient.
   For less soiled crockery, a slightly smaller amount of detergent than indicated is sufficient.

3. Close the lid of the detergent dispenser.

a The lid clicks audibly into place. a The detergent dispenser is depending on the program opens automatically at the optimum time for the program. The powder or liquid detergent is spread and dissolved in the rinse aid container.
Tabs fall into the tablet tray and are dissolved in doses. Do not place any objects in the tablet tray to allow the tab to dissolve evenly.

Tip: If you use powder detergent and select a program with pre-rinse, you can also sprinkle some detergent on the inner door of the appliance.

Tableware

Only wash dishwasher-safe dishes in the appliance.
Remark: Glazed crockery and objects made of aluminum and silver may discolour or fade when washed.
Sensitive glass types can become dull after a few wash cycles.

13.1 Damage to glass and crockery
Only wash glass and porcelain that are marked as dishwasher safe by the manufacturer. Prevent damage to glass and crockery.

The following crockery not dishwasher resistant:
¡Pieces con- plug and ser- dirty from wood
¡Decorated glasses, artificial industrial dirty and vases, and antique ser-
dirty ¡non-heatstable plastic front cast
¡China of copper and tin
¡China that with ashes, wax, grease and paint dirty
¡Very small pieces of ser- dirty| Wash only serdirty that by the manufacturer as a dishwasher is resistant to
marked.
dirty chemical saattitude of the dishwasher detergent part caused injury.| Use a dishwasher detergent used by the manufacturer as a tableware
is securely connected notes.
Highly corrosive al- alkaline or strong acidic dishwasher detergent len, especially resources for professional nal or industrial use in combination with
aluminum front throws are not suitable for use in the dishwasher.| If you use highly caustic alkaline or strong acidic the dishwasher means used
used, especially for professional nal or industrial common use, may you no aluminum um objects in the washroom of the device places.
The water temp- rate of it program is too high.| Choose a pro gram with la- set temperature run.
Remove glass and cutlery from the dishwasher shortly after the end of the programme device.

13.2 Loading crockery
Arrange the dishes correctly to achieve optimum washing results and to prevent damage to the dishes and appliance.
Hints
¡When using the device, use less energy and water than with manual washing. ¡On our website you will find examples of how to organize the appliance efficiently.
¡To save energy and water load the appliance to the specified number of standard place settings (standard load of crockery and cutlery).
→”Technical data”, page 54
¡For better washing and drying results sultates, place crockery with curves or cavities at an angle so that the water can run off.

1. Remove coarse food residues from the crockery.
   To save natural resources, do not pre-rinse the dishes under running water.

2. Load the dishes, observing the following:
   – Place heavily soiled crockery such as pans in the lower basket. The stronger spray jet gives you a better washing result.
   – Place dishes in a safe and stable position in the appliance to prevent damage to the dishes.
   – Load cutlery with the pointed and sharp side down to prevent injuries.
   – Place dishes with the opening downwards, so that no water remains.
   – Make sure that you do not block the spray arms so that they can rotate.
   – Le g no small objects  Hey tablet tray e and block this back you with se dishware Hey cover off H and dishware detergent the don’t bake to block.

13.3 Unload crockery
WARNING Risk of injury!
Hot crockery can cause burns. Hot crockery is sensitive to impact and can lead to injury if broken.
▶ After the program has ended, let the dishes cool down for a while before removing them.

1. To prevent drops of water from falling on the dishes, empty the dishes from bottom to top.
2. Check the rinse aid reservoir and accessories for contamination and clean if necessary.
   →”Cleaning and maintenance”, page 41

The Operation in essentie

14.1 Switching on the device
▶ Press ****.
The Eco 50° program is preset.
The Eco 50° program is a very environmentally friendly program and extremely suitable for normally soiled crockery. It is the most efficient program in terms of energy and water consumption for this type of tableware and complies with the EU ecodesign regulation.
If you do not operate the device for 10 minutes, the device will turn off automatically.

14.2 Set program
You can adjust the rinsing to the degree of soiling of the dishes by setting a suitable programme.
▶ Press the program button.
a The program is set and the program button flashes. a The remaining program running time appears on the display.

14.3 Set additional function
In addition to the selected rinsing program, you can set additional functions.
Remark: The additional functions available depend on the program selected.
▶ Press the button of the desired additional function.
→”Additional functions”, page 22
a The additional function is set and the button of the additional function flashes.

14.4 Make time setting
You can postpone the program start by up to 24 hours.

1. **** impressions.
   a The display shows “h:01”.

2. Set the desired program start with .

3. Start impressions.
   a The time setting is activated.
   Tip: You deactivate the time setting by pressing repeatedly until “h:00” appears on the display.

14.5 Start program
▶ Press Start.
a The program is over when down the display shows “0h:00m”.

Comments
¡If you want to add crockery while the appliance is already running, do not use the tablet tray as a handle for the upper basket.
This will allow you to come into contact with the partially resolved tab.
¡You can already view the running program loan by aborting the program.
→”Cancel programme”, page 36
¡It is to save energy appliance switches off automatically 1 minute after the end of the programme.
If you open the door immediately after the program has ended, the appliance will switch off after 4 seconds.

14.6 Activate key lock
The key lock prevents the device from being operated unintentionally or improperly while it is in operation.
▶ Approx. up for 3 seconds **** to press.
a The key lock is activated and is automatically deactivated at the end of the programme.
a When the device is operated, flashes on the display. aIn the event of a power failure, the key blocking activated.

14.7 Deactivate key lock
▶ Approx. up for 3 seconds **** to press.

14.8 Interrupt program
Remark: If you open the appliance door when the appliance is heated up, it is best to leave the appliance door ajar for a few minutes and then close it. In this way you prevent an overpressure from occurring in the appliance and the appliance door from springing open.

1. **** impressions.
   a The program is saved and the device turns off.

2. Press to continue the program.

14.9 Cancel program
To end a program early or to change a program that has started, you must cancel the active program.
▶ Approx. press for 4 Reset 4 sec.
seconds.
a All indicators light up. aOnce the indicators are off,
“0h:01m” appears on the display and the remaining water is pumped out.
a The program is aborted and is closed after approx. 1 minute.

14.10 Switch off the device

1. The instructions for safe use → Page 10consider.
2. Press ****.

Tip: If you touch during the wash cycle **** button, the running program is interrupted. When you switch on the device, the program continues automatically.

Basic settings

You can set the basic settings of your device according to your wishes.

15.1 Overview of the basic settings
The basic settings depend on the equipment of your device.

→”Set water softening”, page 26
At position H00 the water softening is switched off.
Rinse aid del dosage| r051| r00 – r06| Set amount of rinse aid.
Switch off the final rinse system with position r00.
Intensive drying| d001| d00 – d01| During the final rinse, the temperature is increased, resulting in better drying results. The duration may
therefore increase slightly.
Remark: Not suitable for sensitive dishes.
Activate intensive drying “d01” or deactivate “d00”.
Hot water| A001| A00 – A01| Set cold water connection or hot water connection. Only set the device to DHW if the hot water is prepared energetically favorably and a suitable installation is available, e.g. a solar boiler
with circulation line. The water temperature must be a minimum of 40 °C and a maximum of 60 °C.
Turn on hot water “A01” or disable “A00”.
Wi-Fi| Cn0| Cn0 – Cn1| Enable or disable wireless network connection.
At position “Cn0″, the wireless network connection is disabled.
This basic setting is only available after you have connected the appliance to the Home Connect app.
→”Home Connect”, page 39
Remote Start| rc1| rc0 – rc2| →”Remote Start”, page 40 activate or deactivate.
The following settings are possible:
¡With the setting “rc0”, the function permanently deactivated.
¡With the setting “rc1″ you can the function is selected via the button.
→”Activating Remote Start”, page 40
¡With the setting “rc2″, the function permanently activated.
This basic setting is only available after you have connected the appliance to the Home Connect app.
→”Home Connect”, page 39
Factory setting| re| Start with Start YES To confirm of start| Reset changed settings to the factory condition.
The settings for the first commissioning must be specified.

15.2 Change basic settings
Tip: Connect your device to a mobile end device. You can easily make all settings via the Home Connect app.

1. Press .

2. Approx. up for 3 seconds Setup 3 sec. Busy- to access basic settings.
   a The display shows Hxx. a appears on the display displayed to give.

3. Just as often Setup 3 sec. to press until the display shows the desired setting.

4. Just as often Start press until the display indicates the desired value.
   You can change multiple settings.

5. To save the settings, press for approx. 3 second Setup 3 sec. to press.

Home Connect

This device is network-enabled.
Connect your appliance to a mobile end device in order to operate functions via the Home Connect app.
The Home Connect services are not available in every country. The availability of the Home Connect function depends on the availability of the Home Connect services in your country. Information about this can be found at: www.home- connect.com.
To be able to use Home Connect, you must first establish a connection to the WLAN home network (Wi-Fi1) and can be configured with the Home Connect app.
The Home Connect app guides you through the entire registration process. Follow the instructions in the Home Connect app to make the settings.
Hints
¡Take the enclosed documentation of Home Connect. ¡Also take the directions the Home Connect app.
Remark: Please observe the safety instructions in this operating manual and ensure that they are also observed when operating the appliance via the Home Connect app.
→”Safety”, Page 4

16.1 Quick start with Home Connect
Connect the device quickly and easily to a mobile device.
Set up the Home Connect app

1. Install the Home Connect app on the mobile device. 1 Wi-Fi is a registered trademark of the Wi-Fi Alliance.
   2 Apple App Store and the Apple App Store logo are trademarks of Apple
   Inc. Google Play and the Google Play logo are trademarks of Google LLC.

2. Start the Home Connect app and set up access for Home Connect.
   The Home Connect app guides you through the entire registration process.

Set up Home Connect
Requirements
¡The Home Connect app is on it mobile terminal device installed.
¡The device has in place of setup reception of the home network (Wi-Fi).
¡The appliance door is closed.

1. Open the Home Connect app and scan the following QR code.https://qr.home-connect.com/?aG9tZWNvbm5lY3Q6Ly9vcGVuUGFpcmluZz9wc2V1ZG9WaWI9U00wMSZjaWQ9cGFpcmluZ19hbGxfcmV1X21kYX5+dXNlcm1hbnVhbH5kaXNod2FzaGVyfnFyY29kZX5RUl9Db2RlX0luc2lkZV9vZl9Vc2VyX01hbnVhbA==
2. Follow the instructions in the Home Connect app.

16.2 Remote Start
You can start the appliance with your mobile device via the Home Connect app.
Tip: If you are in Basic Settings
→Page 38If you set this function to “rc2”, the function is permanently activated and you can start the device at any time with a mobile device.

Activate Remote Start
If you have set “rc1” in the basic settings of this function, activate the function on your device.
Requirements
¡The device is connected to the WLAN home network connected.
¡The appliance is equipped with the Home Connect app connected.
¡In the Basic Settings
→Page 38this function is set to “rc1”.
¡A program has been selected.
▶ ** impressions.
When you open the appliance door, the function is automatically deactivated.
a Key is illuminated.
Tip: To deactivate the function on ** to press.

16.3 Personal Data Protection
Please observe the instructions regarding the protection of personal data.
When your appliance is connected to a home network connected to the internet for the first time, it transmits the following categories of data to the Home Connect server (first registration):
¡Unambiguous identification of the device ready (consisting of device keys and the MAC address of the builtin Wi-Fi communication module).
¡ Security certificate of the Wi-Fi communication module (for the information- technical security of the connection).
¡The current software and hardware version of your home appliance. ¡ Status of any previous reset to factory settings.
The use of the Home Connect functionalities is prepared during the first registration. This registration should only be performed on the moment you want to use the Home Connect functionalities for the first time.
Remark: Please note that the Home Connect functionalities can only be used in combination with the Home Connect app. Information on data protection can be called up in the Home Connect app.

Cleaning and maintenance

loves
Carefully clean and maintain your device to ensure that it continues to function well for a long time.

17.1 Cleaning the rinse aid container
WARNING Risk of health hazard!
The use of cleaning agents containing chlorine can lead to health damage.
▶ Never use cleaning agents containing chlorine.

1. Remove coarse soiling in the cooking compartment with a damp cloth.
   17.4 Machine Cleaning
   Deposits can lead to malfunctions in the device, e.g. due to food residues and limescale. To prevent malfunctions and the formation of nasty

2. Pour detergent into the detergent dispenser.

3. Select program with the highest temperature.

4. Start the program without dishes.
   →Page 35

17.2 Cleaning agent
Use only suitable cleaning agents to clean the device.
→”Safe use”, Page 10

17.3 Device Care Tips
Follow the device maintenance tips to keep the device working for a long time.

The door seal gen, the front and the operating panel of the dishwasher control moderately with a damp cloth and a little washing-up wipe medium.| Stay because of this these parts clean and hygienicnic.
The appliance door left ajar when the dishwasher ser longer time is not used
used.| This makes the formation of nasty smells prevent.

To reduce odours, it is recommended to clean the appliance at regular intervals.
Machine cleaning is the right program for cleaning the machine in combination with machine care products and machine cleaners.
Tip: Our tested and approved machine care products and machine cleaners for dishwashers can be ordered via https://www.siemenshome.bshgroup.com/store or our service department.
Machine cleaning is a program that removes various deposits in one rinse cycle. The cleaning is done in two stages:

basket hanging or powder in the interior.
2| Food leftovers and deposits| Machine cleaner| Detergent dispenser

For optimum cleaning performance, the program doses the cleaners separately from each other in the respective cleaning phase. This requires the correct placement of the cleaning agents.
If the Machine Cleaning indicator lights up on the control panel or the display prompts you to do so, carry out Machine Cleaning without dishes.
After you have performed Machine Cleaning, the indicator goes out. If the device does not have a reminder function, we advise you to perform the machine cleaning every 2 months.

Perform machine cleaning Comments
¡Run the machine cleaning program went out without any crockery.
¡Use only for dishwashing washers suitable machine care products and machine cleaners.
¡Make sure there are no aluminum um objects, such as grease filters from extractor hoods or aluminum pans, are in the rinsing space of the appliance.
¡If you do not complete the Machine Cleaning nen performs 3 wash cycles, the Machine cleaning indicator goes off automatically.
¡To achieve optimum cleaning power gen, you should pay attention to the correct placement of the cleaners.
¡Take the safety rules on the packaging of machine care products and machine cleaners.

1. Remove coarse soiling in the cooking compartment with a damp cloth.

2. Clean the sieves.

3. Place the machine care product in the interior of the device.
   Only use machine care products specifically designed for dishwashers.

4. Pour the machine cleaner into the detergent dispenser until it is completely filled.
   Do not put any additional machine cleaner in the interior of the appliance.

5. Press ****.

6. Press Start.

a Machine cleaning is in progress. a Once the program is completed, the machine cleaning indicator goes out.

17.5 Screening system
The sieve system filters coarse contaminants from the flushing circuit.

1. micro sieve
2. Fine strainer
3. coarse strainer

Clean sieves
Contaminants from the washing water can clog the sieves.

1. Check the sieves for food residues after each wash.

2. Turn the coarse sieve counterclockwise and the sieve system out to take .
   ‒ Make sure that no foreign objects fall into the pump reservoir.

3. Pull the micro sieve downwards.

4. Press the locking pieces together and remove the coarse sieve upwards .

5. Clean the sieve elements under running water.
   Carefully clean the dirt edge between the coarse and fine sieve.

6. Assemble the sieve system.
   Check whether the locking lugs of the coarse sieve have clicked into place.

7. Place the sieve system in the appliance and turn the coarse sieve clockwise.
   ‒ Verify that the arrow marks are aligned.

17.6 Cleaning the spray arms
Limescale and impurities in the washing water can block the nozzles and bearings of the spray arms. Clean the spray arms regularly.

1. Unscrew the upper spray arm and pull it downwards 2.

2. Pull the lower spray arm upwards to remove it.

3. Check the spray arm outlets for blockages under running water and remove any foreign objects.

4. Install the lower spray arm.
   a The spray arm engages audibly.

5. Fit the upper spray arm and screw it tight.

Troubleshooting

You can rectify minor faults on the device yourself. Before contacting customer service, please refer to the troubleshooting information. This way you avoid unnecessary costs.
Tip: Further information and explanations on troubleshooting can be found online by scanning the QR code in the table of contents and on our website siemens-home.bsh-group.com.
WARNING
Risk of electric shock! Improper repairs are dangerous.
▶ Only trained specialist personnel may carry out repairs on the device.
▶ Only original spare parts may be used for repairing the device.
▶ If the power cord of this appliance becomes damaged, it must be replaced with a special cord available from the manufacturer or its service agent.

1.Close the tap.
2.Contact the service department
→Page 53.
E:31-00 lights up alternately selend.| Aquastop system is activated.
1.Close the tap.
2.Contact the service department
→Page 53.
E:32-00 lights up alternately selend or indication
for water supply burns.| Water supply hose is kinked.
▶ Lay the water supply hose without kinks.
Tap is closed.
▶ Turn on the tap.
Tap is clogged or calcified.
▶ Turn on the tap.
The amount of water flowing in with the tap open must be at least 10 l/min.
The strainers in the water connection of the supply or Aquastop hose are clogged.
1.Turn off the device.
2.Remove the plug from the socket.
3.Turn off the tap.
4.Unscrew the water connection.
E:32-00 lights up alternately selend or indication
for water supply burns.| 5.Remove the strainer from the inlet hose

6.Clean the strainer.
7.Place the strainer in the inlet hose.
8.Screw the water connection.
9.Check the water connection for leaks.
10.Put the plug back in the socket.
11.Turn on the device.

E:34-00 lights up alternately selend.| Water flows continuously into the appliance.
1.Close the tap.
2.Contact the service department
→Page 53.
E:61-02 lights up alternately selend.| No device error. Water drain pump is blocked or cover of water drain pump is loose.
1.Clean the drain pump.
→”Clean the drain pump”, page 51
2.Tighten the drain pump cover securely.
→”Clean the drain pump”, page 51
E:61-03 lights up alternately
selend. The water
is not pumped out.| No device error. Siphon connection is still closed or the water drain hose is kinked or clogged.
1.Check the connection to the siphon and open it if necessary.
2.Lay the drain hose without kinks.
3.Remove any residue.
https://s.cliplister.com/mWWOdjOIiM?play
No device error. Water drain pump is blocked or cover of water drain pump is loose.
1. Reini gd eoff feedrpm p.
→”Clean a priming pump” Page 512. Mon k de afdekking of the drain pOr mp go ed fixed.
→”afvOer clean the pump”, Pa na 51

https://s.cliplister.com/MYcpuKUprg?play

E:92 40 lit off s- selend.| Zevenz ijn dirty or clogged.
▶ R finish the seven.
→  “Cleaning seven n”, page
All LEDs light up or flash.| Electronics has detected an error.
1.Press the main switch button for approx. 4 seconds.
The device resets and restarts.
2.If the problem recurs:
‒ Turn off the device.
‒ Remove the mains plug from the socket or switch off the fuse in the fuse box.
‒ Wait at least 2 minutes.
‒ Switch on the fuse in the fuse box or put the plug in the socket.
‒ Turn on the device.
3.If the problem recurs:
‒ Contact the service department.
→”After-sales service”, page 53
Leftover food on it China.| Dishes are placed too close together or the basket is too full.
1.RoomyIt serv okayd met fulldoing t interspace in.
De sprays tralreadyand M Oeatnh eat up pervla k of the service viesgOed can n berei know.
D raye nv an the p oarsman s men of Theo bottom spray armi sborn lOk time d.
▶ Spacious huht ser iesg oedso in dahet crockery the turn of the dturn of theis prouch does not interfere.
Spreeggan Spraya m r andre ve rstopt
▶ Clean the egg arms
→ Page a 44.
The seven iz jn verv ld.
▶ Re nig the seven.
→”Seven re nigen , Pa after 43
Leftover food on it China.| The screens are incorrectly fitted and/or not secured.
1.Fit the sieves properly.
→”Sieve system”, page 43
2.Secure the seven.
Washing program selected too weak.
▶ Choose a more powerful rinsing program.
→”Programs”, page 19
Dishes have been pre-cleaned too well. The sensor system therefore opts for a weak washing programme.
Ha dn kkig vu an ge thee eldon’t wr e il klt t Orde nverothird
▶ v ew dera lland g dirty rOvedinner res and ea spe l the sergoodd not voor.
How silly pieces g , s sgain experience in how i go n unnecessarily washed out d.
▶ Roomy high, narrow stscu a youkkand se rviesgoed niet te the corners in en not in in.
BOvenste serv eskorf is right and i links ni et Op the same gesturel d.
the H eye teggn venst ecrockery sko recht s on the same
▶ DebbO  rf linsk en set up hi t i .
→”Bovnse servi e t esbasket”, P gina 23
There b evinden zich ver- wij therbare vegenon glazyn, sgwlae kmret
ee n metaplease ibtenice
and cutlery.| The  farm lhed glanspool mudiu  is t e hoog nige st d.
▶ Couple It glansspoolsytseem i no p an I ageer stand.
→”Hoovcellheid glansspoe lm Indeed el instAlnl “. Page 29
Er is don’tngivel ans spOelmiddel tOeg evoegd.
▶ Do r reinse aid li e n.
→”Fill and gla nsflushing agent “, pg ina 28
Tidj ens he t prOgRammagedee letg alnspool e n his res- ten vatwash mdit prlesence ig. Lid an hvet dishwasher middelbakj ewedr do Or se vr iesgoebdlokk eartheand wentnopen fully.
There are removable smudges on it glasses, glassware with a metallic appearance and cutlery.| 1.Arrange the dishes in the upper basket in such a way that the tablet tray is not blocked by dishes.
→”Loading crockery”, page 33
Pieces of crockery are blocking the lid of the detergent dispenser.
2.Do not place any dishes or fragrance dispenser in the tablet tray.
Dishes have been pre-cleaned too well. The sensor system therefore opts for a weak washing programme.
Some stubborn dirt cannot be removed.
▶ Only remove coarse food residues and do not premise the dishes.
Rust marks on it specifications.| Cutlery is not sufficiently rust resistant. Knife blades are often more strongly affected by this.
▶ Use rust-resistant cutlery.
Cutlery also rusts when it is washed together with rusty objects.
▶ Do not wash rusty objects.
Salt content in the dishwater is too high.
1.Remove spilled softener salt from the rinse aid container.
2.Tightly close the lid of the softener salt container.
There are detergent residues inside the detergent
tray or in the tablet tray.| The spray arms were blocked by dishes, preventing the detergent from being rinsed away.
▶ Make sure the spray arms are not blocked and can rotate freely.
Detergent dispenser was damp when filling with detergent.
▶ Only put the detergent in a dry detergent dispenser.
Indication water softener refill salt lights up.| Water softener salt is missing.
▶ Fill softener salt →Page 26bee.
Sensor does not recognize softening salt tablets.
▶ Do not use softening salt tablets.

18.1 Cleaning the drain pump
Large food scraps or objects can block the drain pump. As soon as the dishwater no longer drains properly, you must clean the drain pump.
WARNING Risk of injury!
Sharp and pointed objects such as shards of glass can block the drain pump and cause injury.
▶ Carefully remove foreign objects.

1. Unplug the device from the power outlet.

2. Remove the upper and lower baskets.

3. Remove the strainer system.

4. Scoop out the existing water.
   If necessary, use a sponge for this.

5. Lift up the pump cover with a spoon and hold it by the bracket.

6. Lift the pump cover at an angle inwards and remove it. aNow you can turn the impeller by hand reaches.

7. Food scraps and emde objects spills at the pump aier remove-  goods.

8. Fit the pump cover and press down .a The pump cover clicks audibly fixed.

9. Assemble the sieve system.

10. Insert the lower and upper baskets.

Transporting, hit and throw

19.1 Disassemble the device

1. Unplug the device from the power outlet.
2. Turn off the water tap.
3. Loosen the drain water connection.
4. Loosen the drinking water connection.
5. If present, loosen the fixing screws of the furniture parts.
6. If present, remove the plinth.
7. Carefully pull the device forward, pulling the hose along with it.

19.2 Frost-proof the device
If the device is located in a room with a risk of frost, e.g. in a holiday home, empty the device completely.
▶ Empty the device.
→”Transporting the device”, page 52

19.3 Transporting the device
To prevent damage to the device, empty the device before transport.
Remark: To prevent residual water from entering the controller and damaging the device, only transport the device in an upright position.

1. Remove crockery from the appliance.

2. Secure loose parts.

3. Turn on the device.
   →Page 34

4. Select the program with the highest temperature.
   →”Programs”, page 19

5. Start the program.
   →Page 35

6. To empty the appliance, cancel the program after approx. 4 minutes.
   →”Cancel programme”, page 36

7. Turn off the device.
   →Page 36

8. Close the tap.

9. To remove the remaining water from the appliance, disconnect the inlet hose and let it drain.

19.4 Disposal of your old appliance
Valuable raw materials can be reused through environmentally friendly disposal.
WARNING
Risk of health hazard!
Children can lock themselves in the appliance and endanger their lives.
▶ In the case of discarded appliances, unplug the mains cable, then cut the mains cable and damage the appliance door lock to such an extent that the appliance door no longer closes.

1. Unplug the power cord from the wall outlet.
2. Cut the power cord.
3. Dispose of the device in an environmentally friendly  manner.
   You can obtain information about the current disposal methods from your dealer and your municipal or district council office.
   **** This appliance is marked in accordance with with the European directive 2012/19/EU on waste electrical and electronic equipment (waste electrical and electronic equipment – WEEE).
   The directive sets out the framework for take-back valid in the EU and disposal of old appliances.

Service department

Original replacement parts that are relevant for operation in accordance with the respective Ecodesign Regulation can be obtained from our service department for a period of at least 10 years from the time of placing the device on the market within the European Economic Area.

Remark:Calling in the service department within the scope of the manufacturer’s warranty conditions is free of charge.
Detailed information about the warranty period and warranty conditions in your country can be obtained from our service department, your dealer or on our website.
When you contact the service department, you will need the product number (E-Nr.), the production
number (FD) and the serial number (Z- Nr.) of the device.
Contact details for the service department can be found in the service list supplied or on our website.

20.1 Product number (E-Nr.), production number (FD) and serial number (Z-Nr.)

The product number (E-Nr.), the production number (FD) and the serial number (Z-Nr.) can be found on the rating plate of the device.
The rating plate can be found on the inside of the appliance door.

To quickly find your device data and service telephone numbers, you can write them down.

20.2 AQUA-STOP guarantee
In addition to the warranty claims against the seller based on the purchase agreement and our manufacturer’s warranty, you will be indemnified if the following conditions are met.
¡If due to an error in the AquaStop system is caused by water damage, we will compensate the damage of private users. To ensure the water protection system, the appliance must be connected to the electricity supply.
¡The liability guarantee applies to the life of the device.
¡Condition for entitlement to guarantee is that the appliance with AquaStop has been set up and connected professionally and in accordance with our installation instructions; this also includes the expertly mounted extension of the AquaStop (original accessories). Our guarantee does not cover defective supply lines or fittings up to the AquaStop connection on the tap.

¡While using a device
In principle, with AquaStop you do not have to keep up or turn off the tap after use for safety reasons.
Only in the event of a longer absence, for example if you go on holiday for a few weeks, should the tap be turned off.

Technical data

1000 kPa (10 bar)
Amount of incoming water| min. 10 l/min
Water temperature| Cold water.
Hot water max.: 60 °C
Capacity| 14 standard place settings

You can find more information about your model on the Internet at https://eprel.ec.europa.eu/1. This web address refers to the official EU product database EPREL. Then follow the instructions when searching for the model. The model identification consists of the character before the slash of the E number (E-Nr.) on the type plate. Alternatively, you will also find the model identification in the first line of the EU energy label.

21.1 Information about Free Software and Open Source Software
This product contains software components licensed by the intellectual property holders as free software or open source software.
The information about the respective license is stored in the home device. In addition, you can obtain this license information via the Home Connect app: ‘Profile -> Legal information -> License information’.2You can also download the license information from the product website. (Search the product website for your device model and its documentation.) Alternatively, you can also request the relevant information from ossrequest@bshg.com or BSH Hausgeräte GmbH, Carl-Wery-Str. 34, D-81739 Munich.
The source code will be made available to you upon request.
Send a request to this effect to ossrequest@bshg.com or BSH Hausgeräte GmbH, Carl-Wery-Str. 34, D-81739 Munich.
Subject: „OSSREQUEST“ You will be charged for the processing of your request. This offer is valid for three years from the date of purchase or at least during the period riode in which we provide support and spare parts for the device in question.

Declaration of Conformity

ring
BSH Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality complies with the fundamental requirements and the other applicable provisions of Directive 2014/53/EU.
A detailed RED Declaration of Conformity can be found on the Internet at siemens-home.bshgroup.com on the product page of your device in the additional documents.

**** 2.4 GHz band (2400–2483.5 MHz): max. 100 mW
5 GHz band (5150–5350 MHz + 5470–5725 MHz): max. 150 mW

| BE| BG| CZ| DK| THE| EE| IE| el| ES
---|---|---|---|---|---|---|---|---|---
FR| HR| IT| CY| LI| LV| LT| LU| HU
MT| NL| AT| PL| PT| RO| SI| SK| FI
SE| NO| CH| TR| IS| UK (NI)| | |

5 GHz WLAN (WiFi): for indoor use only.

5 GHz WLAN (WiFi): for indoor use only.
Manufactured by BSH Hausgeräte GmbH under trademark license from Siemens AG

BSH Hausgerate GmbH
Carl-Wery-Strasse 34 81739 Munich, GERMANY
siemens-home.bsh-group.com
9001837121

9001837121
(030525) 650V1

References

• Appliances.com
• Group Publishing
• Welcome to Siemens Home Appliances International
• Connect your household | Home Connect
• Siemens Home Appliances Online Shop

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>