Soundcore Life Dot 3i Earbuds True Wireless User Manual

: June 14, 2024
: Soundcore

Table of Contents

SUPPORT
APP
FIRMWARE UPGRADE
AMBIENT SOUND
WEARING
CHARGING
POWERING ON/OFF
PAIRING
DUAL CONNECTIONS
MANUAL PAIRING
Customer Service
CUSTOMER SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Soundcore Life Dot 3i Earbuds True Wireless

Soundcore Life Dot 3i Earbuds True Wireless

SUPPORT

For FAQs, detailed user manual and more information, please visit Choose the Ear Tips that fit your ears best. www.soundcore.com/support

APP

|
Google Play and the Google Play logo are
trademarks of Google Inc.

Apple and the Apple logo are trademarks of Apple Inc.

Download the Soundcore App to customize the user interface (e.g. adjust volume, control playback, activate Siri), adjust EQ, switch ANC modes, update firmware, and explore more.

FIRMWARE UPGRADE

Ensure the earbuds are placed in the charging case and the case remains open until the firmware upgrade is completed.

AMBIENT SOUND

Switch ANC/Transparency/Normal modes in the Soundcore App.

ANC (Active Noise Cancellation): Reduce unwanted background noise.
Transparency: Stay aware of your surroundings while listening to music.

WEARING

Choose the Ear Tips that fit your ears best.

CHARGING

Fully dry off the USB charging port before charging.
Use a certified USB-C charging cable to prevent any damage.

POWERING ON/OFF

Open the charging case, the earbuds will automatically power on.
To power off, place the earbuds in the charging case and close it.

PAIRING

PAIRING PAIRING

Remove the protective film from the earbuds, put them back in the case, and close the lid. Open the charging case, the earbuds will automatically enter Bluetooth pairing mode. Select “Soundcore Life Dot 3i” on your device’s Bluetooth list to connect.

DUAL CONNECTIONS

There are two ways to connect the earbuds with two Bluetooth devices at the same time.

In the Soundcore app, go to settings and select Dual Connections > Connect New Device.
Alternatively, wear the earbuds, then press and hold the button on both earbuds for
seconds simultaneously. You can then connect to the earbuds from your second device’s Bluetooth settings.

MANUAL PAIRING

To manually enter Bluetooth pairing mode, place the earbuds in the charging case and leave the case open, then press and hold the button on the case for 3 seconds until the LED indicator on the charging case flashes white.

Symbol CONTROLS

CONTROLS

x1: Press once
x2: Press twice
2s: Press and hold for 2 seconds

CONTROLS

x1: Press once
x2: Press twice
2s: Press and hold for 2 seconds

Symbol RESET

Reset if the earbuds cannot properly pair with each other or with other devices.
Place the earbuds in the charging case and leave the case open. Press and hold the button on the case for 10 seconds until the LED indicator on the charging case flashes red 3 times . This confirms that the reset was successful and your earbuds can be connected normally.

Symbol LED LIGHT GUIDE

Steady white
Steady red
Flashing white
Flashing red

Symbol TIPS

Bluetooth Pairing: For some smartphones, you may be requested to re-confirm the pairing on a pop-up window after you have selected “Soundcore Life Dot 3i” to pair.
Breaking Bluetooth Connection: Turn off your Bluetooth device and turn it on again.
Remove “Soundcore Life Dot 3i” from your device’s Bluetooth list.
Reset: If you try to reset the earbuds, make sure that the earbuds are being charged in the case and leave the case open.

Customer Service

18-month limited warranty

Lifetime technical support

Our warranty is additional to the legal rights consumers have buying this product.

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited is under license. Other trademarks and trade names are those of their respective owners.
FCC ID: 2 AOKB-A3992LC
IC: 23451-A3992LC
210-209378