CONENTOOL CT Cordless Drill Driver 21V User Manual
- June 14, 2024
- CONENTOOL
Table of Contents
Cordless Drill
User’s Manual
WORK SAFETY
-
Remove any adjusting key or wrench beforeturning the power tool on.
Awrench or a key leftattached to a rotating part of the power tool mayresult in personal injury. -
Keep work area clean and well lit. Cluttered ordark areas invite accidents.
Do not operate power tools in explosive atmos-pheres,such as in the presence of flammable -
Power tool plugs must match the outlet. Nevermodify the plug in any way. Do not use anyadapter plugs with earthed (grounded) powertools.
Unmodified plugs and matching outlets willreduce risk of electric shock. -
Do not expose power tools to rain or wet condi-tions. Water entering a power tool will increasethe risk of electric shock.
-
Stay alert, watch what you are doing and usecommon sense when operating a power tool.Do not use a power tool while you are tired orunder the influence of drugs, alcohol or medi-cation. A moment of inattention while operatingpower tools may result in serious personal injury.
TECHNICAL SPECIFICATIONS
| Name: | Cordless Drill |
|---|---|
| Chuck size: | 3/8 inch(10mm) |
| Compatible voltage： | 110-240V |
FUNCTIONAL DESCRIPTION
| No. | Name | Instructions |
|---|---|---|
| 1 | Torque button | Turn to adjust the torque |
| 2 | Two speed buttons | Low speed |
High speed
3| Rubberised soft handle| Anti-slip
4| Toggle keys| Switchable keys
5| Li-ion battery| Removable
6| Commutation lever| Forward and reverse operation
INSTALL OR REMOVE SCREWDRIVER BITS/DRILLS
- Sleeve
- Tighten
- Open
VARIABLE SPEED
2. Two-speed adjustment
Low speed: Press the speed control until “1” is displayed.
High speed: Press the speed control until “2” is displayed.
OPERATION OF THE REVERSING SWITCH
3. Reverse switch handle
- Press on side A and rotate clockwise
- Press on side B and rotate counterclockwise
- The reverse switch handle is in the neutral position, and the switch trigger cannot be pulled.
PROBLEMS AND SOLUTIONS
| Problems | Possible causes | Solutions |
|---|---|---|
| Motor works after start-up, drill does not work | Insufficient power | Please |
charge the drill 1-2H
Shift lever won’t push / switch trigger won’t pull| Reverse toggle in neutral
position|
Press to toggle t reverse the to the left or right
CUSTOMER QUESTIONS & ANSWERS
Are the hexagonal bits clamped into the drill chuck? Or is there an adapter?
- You can use both, bits alone or if the distance is a little deeper then with the adapter. 2) If you use a small drill, an adapter is required.
Can this tool be used for drilling and screwing?
- Yes, you can also drill with it. That is why drilling attachments are included. However, such a device does not replace an impact drill. 2) There is no question that it is a cordless screwdriver.
Can it be used to drill holes for hanging a ceiling lamp, for example, in concrete?
- Unfortunately, for concrete you need an impact machine. 2) No, it is not suitable for drilling ceilings.
No problem, it goes without saying
How can I secure the bits in the drill?
Turn the moving part counterclockwise. It may take a little more force at the end to tighten it.
Manufacturer： Shen Zhen Xin Sheng Shang Technology Co., LTD.
Production Site: 701 7th Floor, Building E, Huihong Industrial Park, Fenggang
Town, Dongguan City, Guangdong
Province, China
Phone: +86 13048907387
Zip Code: 523697
Website: https://conentool.com/