Touch iPad 10th Generation Case with Keyboard Instructions

Touch iPad 10th Generation Case with Keyboard

COMPATIBLE INFORMATION

VERIFY YOUR IPAD 15 FULLY MATCHED BEFORE INSTALLATION

• Compatible for iPad Mini 8.3-inch
  iPad Mini 8.3 inch 6th Generation 2021 (A2567, A2568, A2569)

• Compatible for iPad 10.2-inch/10.5-inch:
  iPad 9th Generation 10.2 inch 2021 (A2602, A2604, A2603, A2605)
  iPad 8th Generation 10.2 inch 2020 ( A2428, A2429, A2430, A2270)
  iPad 7th Generation 10.2 inch 2019 (A2197, A2198, A2200 )
  iPad Air 3rd Generation 10.5-inch 2019 (A2154, A2123, A2153, A2152)
  iPad Pro 2nd Generation 10.5 inch 2017 (Al 709, Al 852, Al 701)

• Compatible for iPad 10. 9-inch
  iPad 10th generation 2022 10.9-inch (A2696, A2777, A2757)

• Compatible for iPad Air 1 O. 9-inch
  iPad Air 10.9 inch 5th Generation 2022 (A2588, A2589, A2591)
  iPad Air 10.9 inch 4th Generation 2020 (A2324, A2325, A2072, A2316)

• Compatible for iPad Pro 11-inch
  iPad Pro 11 inch 4th Generation 2022 (A2759, A2435, A2761, A2762) iPad Pro 11 inch 3rd Generation 2021 (A2377, A2459, A2301, A2460) iPad Pro 11 inch 2nd Generation 2020 (A2228, A2068, A2230, A2231) iPad Pro 11 inch 1st Generation 2018 (A1980, A2013, A1934, A1979)

• Only Compatible with below iPad Pro 12. 9-inch models
  iPad Pro 12.9 inch 6th Generation 2022 (A2436, A2764, A2437, A2766) iPad Pro 12.9 inch 5th Generation 2021 (A2378, A2461, A2379, A2462) iPad Pro 12.9 inch 4th Generation 2020 (A2233, A2229, A2069, A2232) iPad Pro 12.9 inch 3rd Generation 2018 (A1876, A2014, A1895, A1983)

Note : If compatibility information is updated without prior notice, You may refer to selling link or contact our seller on Amazon to confirm the latest compatible information.

SPECIFICATION & ACCESSORY

1. Find your iPad model number in settings a, Go to iPad» Settings>General>About b, » Tap on the model number and the model of AAXXX will be appeared
2. Find your iPad model number on the back of your iPad.

• Bluetooth operating distance: 7 0 meters
• Modulation system:GFSK
• Power supply DC 5V/9V Type-C Charging Port
• Rechargeable battery:500mAh
• Standby time:90 days
• Charging time:<3hours
• Working time <5 hours(with backlight)<180hours (with backlight off)
• Works system:iPadOS (above7 4.6 above)

INSTALLATION

PUT IPAD INTO THE CASE

• To install your iPad from the bottom to the top of the case and fasten it

LOCK THE SECURE BUCKLES

• The left and right locks are designed to double protect your iPad, in case your iPad accidentally falls.

• The buckle is made of plastic, please turn it gently.
• If there is no bukles design on the side of keyboard case, please kindly refer to the final version on your hands.

PENCIL HOLDER

• Available for Apple Pen 2nd Gen charging when the pencil is ONLY attached to your iPad.

PENCIL HOLDER

• Available for Apple Pen 2nd Gen charging when the pencil is ONLY attached to your iPad.

NOTE

1. If there is no pencil holder design on the left side of keyboard case, please kindly refer to the final version on your hands.
2. Pad 8.3-inch not compatible with pencil holder design.

POWER SOURCES

POWER SUPPLY

• The keyboard case is charged by TYPE-C

POWER SWITCH

• Push the power button to turn On/Off your device. The LED will be flashed by 3 times once turn it on or off.

POWER SWITCH

• Holding the POWER button on keyboard to turn On / Off your device . the LED will be flashed by 3 times once turn it on or off. ( to press any keys to wake it up during standby mode )

NOTE
Keep at normal temperature and charge at normal voltage. If you don’t use it for long time, you need to charge your keyboard in time (once of two months).

POWER SOURCES (LED INDICATOR)

LED INDICATOR

• LED1
  White: Caps mode is On/Off :Caps Mode is Off

• LED2
  Green: Battery is Full Charged

• LED3
  Red Flashing: Low-battery Warning
  Red Keep Lighting: Undering Charging mode

• LED4
  Blue Flashing Bluetooth is Waiting for Pairing Blue Keep Lighting: Bluetooth is Paired

LED INDICATOR

• LED1
  Blue Flashing: Bluetooth is Waiting for Pairing Blue Keep Lighting: Bluetooth is Paired

• LED2
  White: Caps mode is On/Off :Caps Mode is Off

• LED3
  Red Flashing: Low-Battery Warning
  Red Keep Lighting: Underling Charging Mode Green: Battery is full Charged

LED INDICATOR

• LED1
  Blue Flashing: Bluetooth is waiting for pairing Blue Keep Lighting: Bluetooth is paired
  Red Flashing: Low-battery warning
  Red Keep Lighting: Undering charging mode Green: Battery is full charged

• LED2
  White: Caps mode is On/Off : Caps mode is Off

BLUETOOTH CONNECTION

NOTICE BEFORE CONNECTING

1. Make sure your iPad ios system up to 14.6 or above
2. iPad assistive touch toggle function on.(Setting/ Accessibility/Touch/ AssistiveTouch)

STEPS FOR CONNECTION (for iPad 10.2″/10.5″/10.9″/11 “):

1. Holding press the power button to turn on the ipad keyboard.
   (The RGB backlight will turn on and then turn off automatically a second.)

2. Then holding press connection button CID blue wireless indicator will flash which shows the keyboard is waiting for pairing mode

3. Turn on your ipad »>Setting »>Bluetooth, and search the “ipad-keyboard” on list, then tap it for connection.

STEPS FOR CONNECTION (for iPad 8.3″/12.9″)

1. For iPad 12.9″: Push the power button to turn on the iPad keyboard.
   For iPad 8.3″: Holding press the power button to turn on the ipad keyboard.
   (The RGB backlight will turn on and then turn off automatically a second.)

2. Then to press combination keys ” and “C” together, blue wireless indicator will flash which shows the keyboard is waiting for pairing mode.

3. Turn on your iPad »>Setting »>Bluetooth, and search the “ipad-keyboard” on list, then tap it for connection.

NOTE

1. Device is connected when Bluetooth indicator stops flashing.

2. When the keyboard is turned on, if there is no signal input for more than 7 0 minutes, it will automatically enter sleep mode. At this time, you only need to double-click any button to re-active the keyboard again.
   (do not need to turn on/off the power and reconnected again)

3. When reconnecting Bluetooth, the touch pad will a slight delay of about 3 seconds, which is normal, because the touch pad needs to retrieve Bluetooth and connect to it.

BLUETOOTH CONNECTION

• Holding press power button for more than 3 seconds to turn on the keyboard case.
• Push the power button to turn On/Off your device.
• Holding press connection button for more than 3 seconds to turn on the Bluetooth connection.
• Press combination keys for Bluetooth connetion “Fn” and “C”

• Find the Pair name on your iPad Setting – Bluetooth list ” iPad Keyboard “

• Confirm the pairing request on your iPad.

KEYBOARD FUNCTION(toriPad 12.9″)

A FULL ROW OF HOTKEYS AND MEDIA KEYS
Function key: Press the FN + function key

Play/pause(Note: third party player video is not supported)

Home
Darker
Brighter
Play/pause(Note: third party player video is not supported)
Enable iPad search
Switch the language

Virtual keyboard
Select all
Copy
Paste
Cut
Back

RGB BACKLIGHT KEYS

1. Seven modes backlight: Press switch 7 different backlight modes or turn off the RGB backlight.
2. Three modes breathing backlight: Press to turn off/on the breathing backlight. Press B + GJ to control the speed of the breathing light fast or slow.
3. Three modes brightness backlight: press g to adjust the brightness of the backlight.

NOTE :
For power saving, if you don’t touch keyboard for 5 seconds, the backlit would go off automatically, it will light up again when you press any key.

KEYBOARD FUNCTION(toriPad 10.2″/10.5″/10.9″/11″)

for iPad 10.2-inch/10.5-inch/10.9-inch/11-inch Keyboard Layout A FULL ROW OF HOTKEYS AND MEDIA KEYS

Home
Darker
Brighter
Play/pause(Note: third party player video is not supported)
Enable iPad search
Switch the language

Virtual keyboard
Select all
Copy
Paste
Cut
Back

RGB BACKLIGHT KEYS

1. Seven modes backlight: Press switch 7 different backlight modes or turn off the RGB backlight.
2. Three modes breathing backlight: Press to turn off/on the breathing backlight. Press B + GJ to control the speed of the breathing light fast or slow.
3. Three modes brightness backlight: press g to adjust the brightness of the backlight.

KEYBOARD FUNCTION(toriPad 12.9″)

A FULL ROW OF HOTKEYS AND MEDIA KEYS
Function key: Press the FN + function key

Play/pause(Note: third party player video is not supported)

Home
Darker
Brighter
Play/pause(Note: third party player video is not supported)
Enable iPad search
Switch the language

Virtual keyboard
Select all
Copy
Paste
Cut
Back

RGB BACKLIGHT KEYS

Turn the backlight on or off.or adjust the brightness of the backlight
Backlight color switching

NOTE

For power saving, if you don’t touch keyboard for 5 seconds, the backlit would go off automatically, it will light up again when you press any key.

TRACKPAD GESTURE DESCRIPTION

Tap : Press with finger until it feels a little bit Tap and hold: Press and hold with finger.

• Open the Dock: Swipe the pointer across the bottom of the screen with one finger.

• Go to the home screen: When the dock appears, swipe the point errors the bottom of the screen again

• Open “Notification Center”: Move the pointer to the status icon in the upper left cornerofthe screen with forefinger, then taper swipe up again with forefinger.

• Open “Control Center’: Move the pointer to the status icon in the upper right corner of the screen with one finger ,then tap or swipe up again with forefinger.
  

• Auxiliary tap: Move the cursor to the APP icon with one finger, then tap or tap with two fingers to open the APP menu.

• Scroll up or down Swipe up or down with two fingers Scroll left or right” Swipe left or right with two fingers

• Turn on the Today view: When the home screen or lock screen is visible, swipe right with two fingers Open search from the home screen Swipe down with two fingers.

• Zoom: Place two fingers close together, spread to zoom in, or pinch to zoom out

• Go to the home screen: Swipe up with three fingers
• Open the APP switcher: Swipe up with three fingers, pause and then lift your finger
• Switch between open apps! Swipe right with three fingers, then swipe left or right to switch.

BE SURE THAT TOUCH PAD CAN BE USED ON YOUR IPAD AS BELOW STEPS

1. You need to complete below settings: Settings/Accessibility/Touch/Assistive Touch/Assistive ouch On
2. Make sure your iPad Software Version is up to 14.6 or above version.
3. Choose right “Keyboard’ on your iPad General/Keyboard/Keyboards/English(US)/QWERTY

KEYBOARD FUNCTION

Touchpad

1. Make sure the iPadOS operation system up to 14.6 and above.
2. Press 8+GJto turn on/off the touch function.
3. After successfully turn on the touch pad, when moving the touch pad with your hand, you will see a cursor appear on the iPad screen.
4. The shortcut gestures are based on default setting. Kindly refer to our gesture instructions manual.
5. Kindly mind your hands on touch pad when typing, otherwise your cursor may move randomly. You can simply to turn it on or off.
6. When every time to connect the Bluetooth, the touch pad will a slight delay of about 3 seconds .which is normal, because the touch pad needs to retrieve Bluetooth and connect to it.

*You can adjust the cursor tracking speed as one of below settings

1. Settings/ Accessibility /Touch/ Assistive Touch On the bottom of this page, you can adjust tracking sensitivity, cursor will be slower when it’s closer to tortoise, and be more sensitive when it’s close to the rabbit.
2. Settings/General/Trackpad& Mouse You can adjust tracking sensitivity, cursor will be slower when it’s closer to tortoise and be more sensitive when it’s close to the rabbit.

Note

1. The second settings only can be set after keyboard connects to you iPad successfully.

TROUBLE SHOOTING

*How to confirm the keyboard need to be charged?

1. When the low battery indicator(red sign) blinks, please use the included TYPE-C cable with your iPad charger to recharge it. The red indicator stays on during recharging. After the charging completed, the green indicator would light up.

2. lf you do not use the keyboard for a long time. Please recharge your keyboard in time (once of two months).
   *How to detect the battery level of the keyboard or ensure that the battery level has been successfully charged?

3. If the LED charging indicator lights up in red for a long time, it means that is charging.

4. After the keyboard is successfully connected to the iPad. Swipe right on the iPad home screen. The keyboard battery life is subjected to the Bluetooth icon, see jpg 1.

5. *How to do if the keyboard can’t connect to your iPad and restart the keyboard.

*How to press symbol buttons ?
After bluetooth connected well , just press combination Keys : “Shift” and ” any symbol “. For example, “Shift” and”@” then you will get “@” on your iPad.

TROUBLE SHOOTING

*How to change between lowercase and uppercase on the keyboard?

1. The caps lock default function is switch languages. So to type capital letters on the keyboard, please turn off the cap lock default function first.
2. Go to your iPad settings—Keyboards setting- hard ware keyboard–turn off the toggle of switch languages using caps lock”, then you can change between lowercase and uppercase by press the caps lock key.

*How to do if the space bar doesn’t work?

1. You can try below settings firstly: Settings/ Accessibility /Keyboards/Full Keyboard Access/Commands/
2. Then change settings for “Space” from “activate” to “Clear’. If it comes back, then you can also turn off full keyboard access.
3. Once it is cleared, the space bar would work fine.

How to do if some keys don’t work?

• Some of the keys do not work,please try to reset the keyboard by pressing and hold the combination key”L +S+Z” for 3s, you’ll see the indicator flash once. It shows the keyboard has been reset. After resetting the keyboard, please pair the keyboard with your iPad again.

If there is delay after you press keys, please kindly check one of iPad Settings as below:

• Settings/ Accessibility/Keyboards/Slow Keys Off
• Settings/Accessibility/Keyboards/Slow Keys On 0.1 Seconds

If there is repeated characters after you press certain key, please kindly check one of ipad Settings as below:

• Settings/Accessibility/Keyboards/Key Repeat On 0.7 Seconds
• Settings/ Accessibility /Keyboards/Key Repeat Off

*Be sure that touchpad can be used on your iPad as below steps:

1. You need to complete below settings:
   Settings/ Accessibility /Touch/ Assistive Touch/ Assistive Touch On

2. Make sure your iPad Software Version is up to 14.6 or above version.

3. Choose right “Keyboard” on your iPad General/Keyboard/Keyboards/English(US)/QWERTY

Note
The second settings only can be set after keyboard connects to you iPad successfully.

*How to updating your pads to 14.6 ?

• To upgrade your pads to the latest version

1. Open your device’s Settings > General > Software Update.
2. Tap Download and Install.

*If you see Resume Download, tap that instead

![Touch-Pad-10th-Generation-Case-with-Keyboard-033]](https://manuals.plus/wp- content/uploads/2023/11/Touch-Pad-10th-Generation-Case-with-Keyboard-033.png)

*If you have unwanted auto-correction or punctuation, please follow these steps:

1. 0pen Settings app > General> Keyboard > Hardware Keyboard;
2. Toggle OFF Auto-Capitalization, Auto-Correction, and”.” shortcut (please refer to the picture below).

360-Degree Rotating

WARRANTY & TECHNICAL SUPPORT

• Thanks for purchasing 360-degree swivel keyboard case with trackpad series, each unit was manufactured and under strict quality control. Each products is covered by a one year warranty. If you have any questions about the product, please contact our brandsupport at [email protected] And you are most welcom to contact us for latest user manual.
• Thanks for your support always1 Please contact our brand support at [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>